Closed jamesiswizard_1 IPv^6 Tutorial & Tricks Updates

[TheScript]

kung naka gawa kana nung Connector ko sa dashboard.,dun kana sunod na lagi kumonect sa Connector ko kasi may kasamang tricks.,yung.,
at iwas detect pa dun kaysa broad band may Tracking.,

malinaw na po ba ? hahaha

 

[mr_vin]

kung naka gawa kana nung Connector ko sa dashboard.,dun kana sunod na lagi kumonect sa Connector ko kasi may kasamang tricks.,yung.,
at iwas detect pa dun kaysa broad band may Tracking.,

ahh,kaya pala parehas na no internet access sa status.tama ba sir?

 

[jamesiswizard_1]

ahh,kaya pala parehas na no internet access sa status.tama ba sir?

tama ka dyan.,It Serve As Anonymity Tools:dead:
No Mac
No Gateway
No Internet Access
But Browsing

Sana Tama Ako.,

 

[mr_vin]

malinaw na po ba ? hahaha

pasensya na sir,malinaw din na sinabi ko na wala ko alam sa networking.

 

[mr_vin]

tama ka dyan.,It Serve As Anonymity Tools:dead:
No Mac
No Gateway
No Internet Access
But Browsing

ok po sir.maraming salamat

 

[jamesiswizard_1]

ok po sir.maraming salamat

Sana Tama Ako.,

 

[PHC-SCANMYVIRUS]

di naman tol.,bakit.,?

kasi sir james lagi ako nagchecheck ng ipv6 after mag dc ako

 

[jamesiswizard_1]

kasi sir james lagi ako nagchecheck ng ipv6 after mag dc ako

so gamtin mo na yung connector ko.,

 

[PHC-SCANMYVIRUS]

so gamtin mo na yung connector ko.,

ok sir ty ulet

 

[jamesiswizard_1]

ok sir ty ulet

ok.,dun kana kumonect.,wag mo nang silipin pa kung connected sa Ipv^6 hehehe

 

[PHC-SCANMYVIRUS]

ok.,dun kana kumonect.,wag mo nang silipin pa kung connected sa Ipv^6 hehehe

nga pala sir james pag nilalagyan ko kasi ng dns yung ipv6 no browse si cproxy tas wala naman ping sakin , kaya hindi ko nalang nilalagyan

 

[jamesiswizard_1]

nga pala sir james pag nilalagyan ko kasi ng dns yung ipv6 no browse si cproxy tas wala naman ping sakin , kaya hindi ko nalang nilalagyan

option mo naman yan.,di ba sabi ko sa first page.,much better na wag lagyan.,.not practical na now a days ang mag lagay ng DNS.,.,

 

[PHC-SCANMYVIRUS]

option mo naman yan.,di ba sabi ko sa first page.,much better na wag lagyan.,.not practical na now a days ang mag lagay ng DNS.,.,

kaya nga sir , tnks a lot sir sa info mo , keep it up

 

[jamesiswizard_1]

kaya nga sir , tnks a lot sir sa info mo , keep it up

welcome bro.,tulog mode na muna ako.,nakaka antok ang pagiging tambay.,

 

[PHC-SCANMYVIRUS]

sige po bro james sleep well , tambay ka ulet sa susunod ))

 

[mr_vin]

feedback ko lang:
delete ko lahat ng bb connection sa network and sharing center
now pumapalo na sa 900kbps browsing ko gamit connector ni sir jamesiswizard
cproxy portable-trial account-coolhousing.net server
Ayos!
EDIT:streaming status
360.92kbps pero walang putol kay YøùTùbé kahit nagda dropdown sa 158kbps.
haha,tomorow na lang fb ko sa dl,manonood si kumander

 

[jamesiswizard_1]

feedback ko lang:
delete ko lahat ng bb connection sa network and sharing center
now pumapalo na sa 900kbps browsing ko gamit connector ni sir jamesiswizard
cproxy portable-trial account-coolhousing.net server
Ayos!

ayos yan.,paste ko ito sa first page.,

 

[jamesiswizard_1]

Checking if your Windows computer has the 5 GHz network band capability
Step 1:
Press the Windows

key on your keyboard to access the Start screen. Type “cmd” until the search result appears under the Apps list. Select Command Prompt to open the application.

IMPORTANT: For Windows 8.1 you can right-click the Start

button. Click Run then enter “cmd” on the field and press [Enter].
NOTE: For touch-enabled computers, swipe from the right side of the screen to reveal the Charms bar with the system commands.

QUICK TIP: The Search section will automatically appear once you type in any character from your keyboard.
Step 2:
On the Command Prompt window, enter “netsh wlan show drivers” then press [Enter].

Step 3:
Look for the Radio types supported section. If it says that the network adapter supports 802.11a or 802.11n network modes, this means that the computer that you are using has the 5 GHz network capability.

In this example, the wireless adapter supports 802.11b, 802.11a, 802.11g, and 802.11n network modes. This means that the computer has the 5 GHz network band capability.
Windows 7/Vista
NOTE: A built-in wireless network adapter of a laptop computer is used for this example.
Step 1:
Click the Pearl

button then enter “Device Manager” on the Search programs and files field. Click the Device Manager link once it appears on the search results.

Step 2:
On the Device Manager window, click Network adapters. Look for the name of your wireless adapter and check if it shows ABGN or AGN.

In this example, the wireless adapter is Intel(R) Centrino(R) Ultimate-N 6300 AGN. This means that the computer has the 5 GHz network band capability.
Windows XP
IMPORTANT: A built-in wireless network adapter of a laptop computer is used for this example.
Step 1:
Click Start > Settings > Control Panel.

Step 2:
On the Control Panel window, double-click the System icon.

Step 3:
On the System Properties dialog box, click Hardware tab then click Device Manager.

Step 4:
On the Device Manager window, click Network Adapters. Look for the name of your wireless adapter and check if it shows ABGN or AGN.

In this example, the wireless adapter is Intel® WiFi Link 5300 AGN. This means that the computer has the 5 GHz network band capability.
NOTE: To identify Linksys dual-band routers and devices that support both 2.4 GHz and 5 GHz bands, click here. For instructions on checking if your Mac computer is compatible with the 5 GHz frequency, click here.
Do you have a Linksys dual-band wireless router?
Linksys dual-band routers support both 2.4 GHz and 5 GHz networks. You can use both networks simultaneously or use just one (1). Choosing between the two (2) frequencies will enhance the application you will be using on the wireless network. To know more about differentiating the 5 GHz and 2.4 GHz bands, click here.


Some of My Old Tricks but Still Kicking and Helpful click nyo lang yung nasa baba nito.,

OLD TRICKS But Still Kicking​

updated

 

[graymon62321]

sir, tanong ko lang para san po to? dik talaga kasi mapalabas yung ipv6 sa properties nung network connection. cproxy po gamit ko now ok naman po yung speed umaabot ng 1.50mbps pero gusto sana itry to baka mas mapabilis pa yung speed ko pero diko alam kung paano e, nagugulughan ako sensya napo 1st time ko po kasi gumamit neto.

 

[jamesiswizard_1]

sir, tanong ko lang para san po to? dik talaga kasi mapalabas yung ipv6 sa properties nung network connection. cproxy po gamit ko now ok naman po yung speed umaabot ng 1.50mbps pero gusto sana itry to baka mas mapabilis pa yung speed ko pero diko alam kung paano e, nagugulughan ako sensya napo 1st time ko po kasi gumamit neto.

nasa first page po yung tutorial.,pa ki basa po muna.,