Help No display after bios update GA-a320m-s2h v1

[jappar]

please help naman nagloloko na kase pc ko bago ang sakuna minsan may power pero no display then na try kona
1- remove/clean ram
2 - change battery bios ( reset bios )
Ito lage ko ginawa kapag di magopen pc ko nakakailang ulit ako bago mabuhay
Then nung nag open na pc ko may display na ginawa ko pinalitan ko setting sa bios yung AC POWER inon ko. Then nag update ako ng bios GIGABYTE
( GA-a320m-s2h v1 )from F23 inupdate ko sa F32 same sa napanuod ka sa yt nag success 100% naman then restart sya kusa pero wala na display pero may power inantay ko halos 20 mins pero wla display.
after balik na naman sya sa may power pero no display. Kahit ginawa ko ulit yung step 1 at 2 then change thermal paste pero di talaga mabuhay pc ko

 

[🤖]

I'm sorry to hear about the issues you're facing with your PC after updating the BIOS on your GIGABYTE GA-a320m-s2h v1 motherboard. Here are some suggestions to help you troubleshoot the problem:

1. Clear CMOS: Since you've already tried resetting the BIOS by changing the CMOS battery, you may also want to try clearing the CMOS settings using the jumper on the motherboard. This will reset the BIOS settings to default and may help resolve any issues caused by the BIOS update.

2. Check Monitor and Cables: Make sure that your monitor is working properly by testing it with another device. Also, check the video cables connecting your PC to the monitor to ensure they are not damaged.

3. Check for Beep Codes: If your motherboard has a built-in speaker, listen for any beep codes when you try to boot up the system. Beep codes can indicate specific hardware issues that may be causing the no display problem.

4. Check Hardware Connections: Ensure that all hardware components, such as the CPU, GPU, RAM, and power connectors, are properly seated and connected. Sometimes a loose connection can cause display issues.

5. Boot into Safe Mode: If possible, try to boot your PC into Safe Mode to see if the display works in that mode. This can help determine if the issue is related to software or driver compatibility.

6. Contact GIGABYTE Support: If none of the above steps resolve the issue, it may be best to contact GIGABYTE technical support for further assistance. They may have specific troubleshooting steps or solutions for your motherboard model.

I hope these suggestions help you diagnose and resolve the no display issue on your PC. If you have any more questions or need further assistance, feel free to ask!

 

[bingjalz]

so in short may ginawa ka sa BIOS na naging dahilan. hindi yan sa BIOS update ksi sabi mo nga success naman.

e reset mo settings nyan. sa dami ng pde galawin POWER pa tlaga.

reset using CMOS jumper. walang magagawa yang remove battery lang.

 

[jappar]

so in short may ginawa ka sa BIOS na naging dahilan. hindi yan sa BIOS update ksi sabi mo nga success naman.

e reset mo settings nyan. sa dami ng pde galawin POWER pa tlaga.

reset using CMOS jumper. walang magagawa yang remove battery lang.

before kase ako mag update ginagwa kona yang reset cmos after ko tanggalin battery kase nga sir nagloloko na sya bago kopa iupdate yung bios. hirap talaga sya magopen madalas no display. taka lang ako success update nya e nagrestart tapos no display na.

 

[bingjalz]

before kase ako mag update ginagwa kona yang reset cmos after ko tanggalin battery kase nga sir nagloloko na sya bago kopa iupdate yung bios. hirap talaga sya magopen madalas no display. taka lang ako success update nya e nagrestart tapos no display na.

baka bumigay na tlaga mobo.

 

[jappar]

baka bumigay na tlaga mobo.

pano ba malaman na bumigay na mobo ? may power naman yung mouse at naikot ang cpu fan at sa case fan.

 

[bingjalz]

pano ba malaman na bumigay na mobo ? may power naman yung mouse at naikot ang cpu fan at sa case fan.

rarely lang nmn ganyang issue sa mobo, pag nasunog capacitor na connected sa north bridge. pero mostly incorrect BIOS lng tlaga yan. need lang e reset. Jumper Reset not Battery