What's new

Closed hp compact desktop boot error

Status
Not open for further replies.

msstar

Forum Veteran
magandang araw po, papatulong lang po sana sa pc namin, may error po sya na 162 palitan daw cmos, pero nung pinalitan ko ganun padin tapos po wala yung f1 option na sinasabi sa screen, kapag naman po pinindot ko yung 3 option sa baba wala din pong response, kapag inulit-ulit ko yung pindot, beep lang nadidinig ko kasabay nung pagpindot ko sa keyboard.

nagtry po ako sa ibang pc na ka-model nya, ganyan din pero lumitaw yung f1 option tapos after ng 162 error may lumitaw na atheros boot po yata yon, tapos pag pinindot mo yung mga options mareredirect ka na, unlike sa isa pong ito.


mga ka-phc, ano po kayang nangyari dito? may pag-asa pa ba to? :( salamat po sa lahat ng tulong, napakalaking bagay po 🙇
 

Attachments

magandang araw po, papatulong lang po sana sa pc namin, may error po sya na 162 palitan daw cmos, pero nung pinalitan ko ganun padin tapos po wala yung f1 option na sinasabi sa screen, kapag naman po pinindot ko yung 3 option sa baba wala din pong response, kapag inulit-ulit ko yung pindot, beep lang nadidinig ko kasabay nung pagpindot ko sa keyboard.

nagtry po ako sa ibang pc na ka-model nya, ganyan din pero lumitaw yung f1 option tapos after ng 162 error may lumitaw na atheros boot po yata yon, tapos pag pinindot mo yung mga options mareredirect ka na, unlike sa isa pong ito.


mga ka-phc, ano po kayang nangyari dito? may pag-asa pa ba to? :( salamat po sa lahat ng tulong, napakalaking bagay po 🙇

Step 1: Reset the default BIOS
Use the following steps to reset the default BIOS settings.
  1. Press and hold the Power button for 5 Seconds to turn off the PC.
  2. Press and hold the F10 key while you press the Power button to turn on the PC. Release the F10 key after text is displayed on the screen of the PC.
  3. After the BIOS Setup Utility is displayed, press the F9 key to select Setup Defaults.
  4. Press the F10 key to select Save and Exit.
 
Step 1: Reset the default BIOS
Use the following steps to reset the default BIOS settings.
  1. Press and hold the Power button for 5 Seconds to turn off the PC.
  2. Press and hold the F10 key while you press the Power button to turn on the PC. Release the F10 key after text is displayed on the screen of the PC.
  3. After the BIOS Setup Utility is displayed, press the F9 key to select Setup Defaults.
  4. Press the F10 key to select Save and Exit.

I then downloaded the HP manual for this model and realised that I had the 2 memory DIMM's in the white slots which was wrong according to the manual, (not sure if it was in those slots when I pulled it apart). Anyway, to cut a long story short, I swapped the DIMMS to the two black slots (XMM3 Channel A and XMM4 Channel B ) which apparently have to be populated first and voila, when it booted it allowed me to use F1 and save the settings.
 
Step 1: Reset the default BIOS
Use the following steps to reset the default BIOS settings.
  1. Press and hold the Power button for 5 Seconds to turn off the PC.
  2. Press and hold the F10 key while you press the Power button to turn on the PC. Release the F10 key after text is displayed on the screen of the PC.
  3. After the BIOS Setup Utility is displayed, press the F9 key to select Setup Defaults.
  4. Press the F10 key to select Save and Exit.
not working po ito sa akin, pero salamat po
 
I then downloaded the HP manual for this model and realised that I had the 2 memory DIMM's in the white slots which was wrong according to the manual, (not sure if it was in those slots when I pulled it apart). Anyway, to cut a long story short, I swapped the DIMMS to the two black slots (XMM3 Channel A and XMM4 Channel B ) which apparently have to be populated first and voila, when it booted it allowed me to use F1 and save the settings.
3 slots po ang occupied sa ram slots ko, nilipat ko naman po pero ayaw nya
 
Status
Not open for further replies.
Back
Top