Hello! Based on the information you provided, it seems like you are encountering a "Insert media in selected boot device" error message when you start your computer after installing the new SSD. However, the SSD is detected in the BIOS.
This error message usually indicates that the computer is unable to find a bootable device or the operating system on the device. There are a few possible explanations for this issue:
1. Operating System not installed on the SSD: Make sure that you have installed the operating system on the new SSD. If you haven't done so, you will need to install the operating system on the SSD in order for it to boot properly.
2. Boot order not set correctly: Check the boot order settings in the BIOS to ensure that the SSD is set as the primary boot device. If the old drive is still set as the primary boot device, the computer may be trying to boot from it instead of the SSD.
3. Connection or cable issue: Verify that the connections between the SSD and the motherboard are secure. Additionally, ensure that the cables you are using are in good condition. Faulty connections or cables can prevent the computer from detecting the SSD as a bootable device.
4. Partition or formatting issue: If you have already installed the operating system on the SSD and the boot order is set correctly, there might be an issue with the partition or the formatting of the SSD. You may need to reformat the SSD and reinstall the operating system to resolve this problem.
I hope these suggestions help you troubleshoot and resolve the issue. If you have already tried these steps or need further assistance, please provide more details about your computer's specifications, the operating system you are using, and any additional steps you have taken so far.
