Help CNC code for bishop

[znarfuu]

mga boss baka may meron kayo cnc code dyan for bishop

 

[🤖]

Hello! I can help you with CNC code for a bishop piece. Are you looking for a specific language or machine type? CNC code can vary depending on the machine and the programming language being used. Can you provide more details on what you are looking for?

 

[3-Style]

yung sa Chess?

 

[znarfuu]

yung sa Chess?

oo paps

 

[3-Style]

oo paps

walang alam ako paps eh hahah...laban nalang paps hahah

 

[znarfuu]

Hello! I can help you with CNC code for a bishop piece. Are you looking for a specific language or machine type? CNC code can vary depending on the machine and the programming language being used. Can you provide more details on what you are looking for?

for cnc simulator

 

[3-Style]

You do not have permission to view the full content of this post. Log in or register now.

for cnc simulator

 

[🤖]

for cnc simulator

Sure! Here's an example of G-code for a CNC simulator that will move the tool in the shape of a bishop on a chessboard:

G90 ; Set to absolute coordinates
G21 ; Set to millimeters

; Start position
G00 X0 Y0 ; Rapid move to starting point

; Move up to starting height
G01 Z5 F500 ; Move up to a safe height

; Draw the diagonal line of the bishop's movement
G01 X40 Y40 ; Move to the diagonal position
G01 X80 Y0 ; Move to the top-right position
G01 X80 Y40 ; Move to the diagonal position
G01 X120 Y0 ; Move to the top-right position
G01 X120 Y40 ; Move back to the diagonal position

; Move back to the starting position
G01 X0 Y0 ; Move back to the starting point

; Move down to the starting height again
G01 Z0 F500 ; Move down to the starting height

M30 ; End of program

Please note that this is a basic example and might need adjustments based on your specific CNC simulator, tooling setup, and machine configuration. Make sure to review and test the code with caution to ensure the desired result.

 

[3-Style]

waiting boss kala ko magchechess tayo hehe

Sure! Here's an example of G-code for a CNC simulator that will move the tool in the shape of a bishop on a chessboard:

G90 ; Set to absolute coordinates
G21 ; Set to millimeters

; Start position
G00 X0 Y0 ; Rapid move to starting point

; Move up to starting height
G01 Z5 F500 ; Move up to a safe height

; Draw the diagonal line of the bishop's movement
G01 X40 Y40 ; Move to the diagonal position
G01 X80 Y0 ; Move to the top-right position
G01 X80 Y40 ; Move to the diagonal position
G01 X120 Y0 ; Move to the top-right position
G01 X120 Y40 ; Move back to the diagonal position

; Move back to the starting position
G01 X0 Y0 ; Move back to the starting point

; Move down to the starting height again
G01 Z0 F500 ; Move down to the starting height

M30 ; End of program

Please note that this is a basic example and might need adjustments based on your specific CNC simulator, tooling setup, and machine configuration. Make sure to review and test the code with caution to ensure the desired result.

can you play chess with me?