Help PLDT Home R281 nag update ng Software Version (v004.1). Openline di na gumagana.

[Silver Dawn]

Nag update ang PLDT Home R281 and hindi na gumagana yung openline na AT+CLCK="PN",0,123456,16
Error na ang nakalagay.
Also, openline na sana ako kaso after the update RED na ang signal. Kaya nag system restore ako planning na i-openline ulit kaso error na yung AT+CLCK="PN",0,123456,16
Any solution?

 

[Caloy06]

Bkt d po ako makalog in sa putty log in as nakalagy tapos dko matype pasword

 

[-SwantoN-]

Salamat sir nakatulong pa ko sa maraming tao dahil sa tulong niyo.

 

[Toa]

issue na yan ng r281 kahit at commands palang Daigo26 kaya may band locking din at command dati kaso dc talaga 2nd band kapag may pci locking ka. band 40 and 41 mo lang di maeencounter yan kasi single band lang naman ginagamit non

 

[Caloy06]

Lodi kpg ilalagay b command need ba may sim yung modem

 

[Daigo26]

[XX='tientien17, c: 1161291, m: 351397'][/XX] Ahh okay po so wala talaga pag.asa stability kai r281? hehe sad life

 

[Daigo26]

Di ba issue ang band locking kai black mamba? balak ko kasi bumili

 

[renlllander89]

meron sa ρáíd service nga lang sakin pinaopenline

 

[Daigo26]

[XX='renlllander89, c: 1161668, m: 1856879'][/XX] Grabe nmn ρáíd service hehe ... di ako minsan naka pag try ng ρáíd dahil sa PHC hehe abang nlng sa mga masters.

 

[Toa]

wala talaga issue huawei modem basta stable firmware. balak ko na nga lang din bumili b818 kaso naglabas smart ng unli 5g data problema yung next sa b818 na modem na 5g halos 18k samantalang nasa 10k to 12k lang b818

 

[pinocchioleonard]

ubus call cm set_cell_lock '{"mode":"2","act":"3","band":"3","freq":"1350","cellid":"27"}'

hi po, ang di ko po maintindihan jan, san kukunin yung mode? at anu yun? di ko rin po alam yung act hahaha, alam ko lng po ay band number, freq at cell id. pwede po pa help maintindihan?

 

[Jaybagz1993]

@Jaybagz1993..ano gamit mo pang upoload cellphone din?

pc sir

 

[jonel0924]

Pa ward po salamat

 

[psycho6000]

[XX='rumi, c: 1153085, m: 395650'][/XX] hiii meron po lumalabas both Marvel, but when i connect it's the same default pldt WebUI and can't connect to either 192.168.8.1 or 192.168.1.1 using putty. tried different Port and username.

 

[H4wk3ye]

Carrier aggregation ng Band 1 is Band 3 and 5. Band 3 carrier aggregation Band 5 and 28.

 

[H4wk3ye]

 

[H4wk3ye]

Example of unlocking Cell Id/freq Band
ubus call cm set_cell_lock
'{"mode":"0","act":"3","band":"3","freq":"1350","cellid":"27"}' Just change mode to 0. If freq band locking use 1 as your mode.

 

[H4wk3ye]

 

[H4wk3ye]

where
<mode> : 0 - Cell/Frequency disabled, 1 - Frequency lock enabled, 2 - Cell lockenabled
<act> 0 - GSM, 1 - UMTS_TD, 2 - UMTS_WB, 3-LTE
<band> - unused (I used 3, but it doesn’t matter)
<freq> - selected EARCN
<cellid> - selected PCI

 

[H4wk3ye]

Lods na try muna freq Band lock lang mas stable ung connection sakin.

 

[psycho6000]

[XX='H4wk3ye, c: 1162187, m: 1855025'][/XX] bro patulong naman, bakit di ako maka connect via ssh using putty either Connection timeout or connection refused yung error. i don't understand why.