PLDT Boosteven R281 (Band Locking)

[_ameee]

ubus call version set_sn_imei_info '{"pcbasn":"M26HAX20102825697","sn":"R281201103012893","imei":"IMEI Number Here"}'

// * okay poo

tanaw ko na po master T^T
wala po siyang ganyan dati

pero N/A parin imei imsi iccid
no network mode din


empty pa rin talaga yung sn_imei_info niya kahit OK yung response

 

[Xpmove12]

// * okay poo

tanaw ko na po master T^T
wala po siyang ganyan dati

pero N/A parin imei imsi iccid
no network mode din


empty pa rin talaga yung sn_imei_info niya kahit OK yung response

View attachment 1621187

Sa huawei kac Maam, pagka Apply new Imei or serial number need ka mag restart or restore default pwede rin yung push button na factory reset yun pwede basta nagpasok new Imei, mac address need factory reset para ma refresh papapsok yung bago Imei

Try mo din kay r281

 

[_ameee]

Sa huawei kac Maam, pagka Apply new Imei or serial number need ka mag restart or restore default pwede rin yung push button na factory reset yun pwede basta nagpasok new Imei, mac address need factory reset para ma refresh papapsok yung bago Imei

sige try ko ireset

 

[L E N A R]

sige try ko ireset

firstboot na lang gamit mo..

firstboot
reboot

 

[Xpmove12]

Yun oh, mukhang may improvement Maam Aimee, Libre mo si Master Arnel, pang Mcdo pag napagana mo ,init ng panahon kahit black gulaman pampalamig pwede na

 

[_ameee]

firstboot na lang gamit mo..

firstboot
reboot

N/A po parin

 

[Xpmove12]

N/A po parin

View attachment 1621214

Yun lang Maam Aimee, Sumobra lang ba 0 Dunsa Zn unlock band yan na nangyari. Grabe pala, dami na commands d pa rin working. Need talaga Firmware upgrade 2.3 up pag may Lumabas

 

[_ameee]

Yun lang Maam Aimee, Sumobra lang ba 0 Dunsa Zn unlock band yan na nangyari. Grabe pala, dami na commands d pa rin working. Need talaga Firmware upgrade 2.3 up pag may Lumabas

yes po sa zn+lock lang sumobra ng 0. di na tapos bumalik sa dati kahit ihard reset pa. idk din if mauupdate ba to kasi di gumagana yung internet con niya. flash firmware nalang talaga siguro : (

 

[_ameee]

kung may way lang sana para madump kahit yung ngayong firmware tas maiflash dito

 

[Xpmove12]

kung may way lang sana para madump kahit yung ngayong firmware tas maiflash dito

Paturo kay master Arnel, flashing via ssh yung Bin file ng R051 V008, Malamang working yan, ang dami kasing Bin file ang R281, malilito ka sa ipa flash jan kung ano working

Kac sa Smartbro Cat4 na Fx id3, working yung firmware sa Cat6 Smartbro Fx Id4, baka nga mag work din sa Pldt Evoluzn Fx-Id5

Parang ganyan din YaN Pldt R051 to R281

 

[_ameee]

Paturo kay master Arnel, flashing via ssh yung Bin file ng R051 V008, Malamang working yan, ang dami kasing Bin file ang R281, malilito ka sa ipa flash jan kung ano working

Kac sa Smartbro Cat4 na Fx id3, working yung firmware sa Cat6 Smartbro Fx Id4, baka nga mag work din sa Pldt Evoluzn Fx-Id5

Parang ganyan din YaN Pldt R051 to R281

pero magkaiba po yung chip niya. baka magkaprob

 

[EugeneKey]

Paturo kay master Arnel, flashing via ssh yung Bin file ng R051 V008, Malamang working yan, ang dami kasing Bin file ang R281, malilito ka sa ipa flash jan kung ano working

Kac sa Smartbro Cat4 na Fx id3, working yung firmware sa Cat6 Smartbro Fx Id4, baka nga mag work din sa Pldt Evoluzn Fx-Id5

Parang ganyan din YaN Pldt R051 to R281

Why do you always suggest flashing the firmware from r051? Where I can see this firmware? Do you have experience with flashing this firmware? What does it do?

You don't seem to understand that we have two devices and two different firmware. Flashing the router with a new firmware will not help the lte modem firmware in any way. And by flashing r051, there is a high probability of finally breaking everything.
_ameee broke lte modem, obviously executing different commands, not quite understanding what he was doing. How to restore it is not clear, you need a full firmware for the lte modem from r281, then there is a chance to flash it and restore work. The second option, as suggested by L E N A R, is to try to recover data such as IMEI, SN, etc. on the router via ubus call. All this data can be viewed on the router itself or through fw_printenv

 

[H4wk3ye]

firstboot na lang gamit mo..

firstboot
reboot

Lods try mo check mga nasa ubus baka nandun ung command. Pacheck nga sayo 2.

 

[H4wk3ye]

pero magkaiba po yung chip niya. baka magkaprob

Try this command

ubus call router router_call_rst_factory

 

[Xpmove12]

Why do you always suggest flashing the firmware from r051? Where I can see this firmware? Do you have experience with flashing this firmware? What does it do?

You don't seem to understand that we have two devices and two different firmware. Flashing the router with a new firmware will not help the lte modem firmware in any way. And by flashing r051, there is a high probability of finally breaking everything.
_ameee broke lte modem, obviously executing different commands, not quite understanding what he was doing. How to restore it is not clear, you need a full firmware for the lte modem from r281, then there is a chance to flash it and restore work. The second option, as suggested by L E N A R, is to try to recover data such as IMEI, SN, etc. on the router via ubus call. All this data can be viewed on the router itself or through fw_printenv

Nice Info, Bro. thanks, If they have different Firmwares and Chipset of R051 and R281 but the same Brand by boosteven

Note: For experimentation lang Poh master yung flashing R051 firmware to R281, Lodi Hawk_Eye did it, but not Working, baka makatsamba, pero no luck pa rin

Ive done flashing other Brand, Bro
The firmware of Cat 4 Evoluzn Fx id3 fully worked in Cat6 Fx id4

 

[H4wk3ye]

Mga master pa double check ng mga files ang lumalabas naka enable pa rin mga updates. Salamat

 

[L E N A R]

Mga master pa double check ng mga files ang lumalabas naka enable pa rin mga updates. Salamat

View attachment 1621379

hindi naman sakin ganyan

 

[matz12]

hindi naman sakin ganyan
View attachment 1621400

Ano po bang command para ma edit? Gagawin ko lang na 0 yung mga value na 1 di ba po? Yung sa tr069 at fota po. Salamat po

 

[H4wk3ye]

hindi naman sakin ganyan
View attachment 1621400

Double check ko mamaya sakin Thanks LENAR.

 

[matz12]

Double check ko mamaya sakin Thanks LENAR.

Ano po ba yung command para maka edit na rin po ako. Salamat po