paano mag install sa cmd? di ko kasi masundan eh TIAHow to enable TFTP Service?
Go to start menu and type "Turn Windows Features on or off" in the Search bar and select the 1st result and press Enter
a window will popped-up. After the window loads, look for TFTP Client, tick the checkbox and click OK
The window will automatically close, please wait a moment.View attachment 17541
View attachment 17535
enable telnet
follow this
telnet 192.168.1.1
Login: wimax
PASS: wimax820
ATP> display allmacaddr
ATP> setallmacaddr "enter your Mac"
ATP> save
ATP> exit
Upload ng Fresh ADVANCE config file (SEE IN THE ATTACHMENT)
Run the bm622 2011 (Upgrader Tool)
Upgrade to 2011 firmware.
After Successful Upgrade
telnet 192.168.1.1
Login:Firefly
PASS: $P4mb1h1r4N4m4nT0!!
ATP> display allmacaddr
ATP> "set sêrïâl number command"
ATP> xiugai macdizhi "Your Mac"
ATP> diag restore default
Done! {Blank Wan Solve}
For Manual Upgrade via CMD
1. Copy the bm622firmware.bin to c:\(your firmware file location)
2. RUN cmd
3. cd "c:/" then press Enter
4. tftp –i 192.168.1.1 put bm622firmware.bin
5. wait till finish
6. done!
How to enable TFTP Service?
Go to start menu and type "Turn Windows Features on or off" in the Search bar and select the 1st result and press Enter
a window will popped-up. After the window loads, look for TFTP Client, tick the checkbox and click OK
The window will automatically close, please wait a moment.View attachment 17541
View attachment 17535
enable telnet
follow this
telnet 192.168.1.1
Login: wimax
PASS: wimax820
ATP> display allmacaddr
ATP> setallmacaddr "enter your Mac"
ATP> save
ATP> exit
Upload ng Fresh ADVANCE config file (SEE IN THE ATTACHMENT)
Run the bm622 2011 (Upgrader Tool)
Upgrade to 2011 firmware.
Bakita ganito TS? HELP po! thanks!
After Successful Upgrade
telnet 192.168.1.1
Login:Firefly
PASS: $P4mb1h1r4N4m4nT0!!
ATP> display allmacaddr
ATP> "set sêrïâl number command"
ATP> xiugai macdizhi "Your Mac"
ATP> diag restore default
Done! {Blank Wan Solve}
For Manual Upgrade via CMD
1. Copy the bm622firmware.bin to c:\(your firmware file location)
2. RUN cmd
3. cd "c:/" then press Enter
4. tftp –i 192.168.1.1 put bm622firmware.bin
5. wait till finish
6. done!