Good Day mga kaPHC
This is a easy way tutorial on how to connect BM622m 2013
Reason: Mostly di sya supported ng mga tool,minsan using tool di maconfigurate ng maayos ang security settings,sinced iba ang security settingni bm622m2013 natin
eto na use this command how changing mac using
(Putty) SSH ang gagamitin natin
*Generate muna natin ang mac na gagamitin
How to enable SSH on GUI?
1.log in as admin
2.Go to Advanced > ACL > (walang SSH no? )
*Press Shift + Alt + A
3.Di macheck ang box? lagyan natin ng check
*Dapat meron kayong Developer Mode na extension sa browser nyo,
kung meron, point the cursor exactly on the box [ ] itapat nyo si mouse dyan, then right click,press Inspect.
4. Pag naclick nyo s inspect may lalabas dyan sa screen nyo, hanapin nyo yung salitang ''disabled'' i highlight at burahin then enter, yan pwede nyo na macheck ang box, press apply,
5. open putty type in 192.168.254.1 port 22
6.log in as username: mt7109 password:wimax
use this command on changing mac
login as: mt7109
password: wimax
# sncfg dset WAN_MAC_ENCRY XXXXXXXXXXXX < mac without ':'
# sncfg dset WAN_MAC XX:XX:XX:XX:XX:18 < Your working mac
# sncfg dset LAN_MAC XX:XX:XX:XX:XX:19 < LAN mac,+ 1
# sncfg commit
# sncfg reload
reboot
After that,
Log in sa admin,using the admin password nung previous Mac na nakalagay bago tayo mag change mac
Punta tayo kay Security settings at ipaste ang generated nating mac,at wimax password neto
Apply then, Boom connected kana
*Self experiment ko po yan para madali lang, pero kung may suggestion kayo for fastest way, post lang kayo ng matry natin
Sana makatulong
This is a easy way tutorial on how to connect BM622m 2013
Reason: Mostly di sya supported ng mga tool,minsan using tool di maconfigurate ng maayos ang security settings,sinced iba ang security settingni bm622m2013 natin
eto na use this command how changing mac using
(Putty) SSH ang gagamitin natin
*Generate muna natin ang mac na gagamitin
How to enable SSH on GUI?
1.log in as admin
2.Go to Advanced > ACL > (walang SSH no? )
*Press Shift + Alt + A
3.Di macheck ang box? lagyan natin ng check
*Dapat meron kayong Developer Mode na extension sa browser nyo,
kung meron, point the cursor exactly on the box [ ] itapat nyo si mouse dyan, then right click,press Inspect.
4. Pag naclick nyo s inspect may lalabas dyan sa screen nyo, hanapin nyo yung salitang ''disabled'' i highlight at burahin then enter, yan pwede nyo na macheck ang box, press apply,
5. open putty type in 192.168.254.1 port 22
6.log in as username: mt7109 password:wimax
use this command on changing mac
login as: mt7109
password: wimax
# sncfg dset WAN_MAC_ENCRY XXXXXXXXXXXX < mac without ':'
# sncfg dset WAN_MAC XX:XX:XX:XX:XX:18 < Your working mac
# sncfg dset LAN_MAC XX:XX:XX:XX:XX:19 < LAN mac,+ 1
# sncfg commit
# sncfg reload
reboot
After that,
Log in sa admin,using the admin password nung previous Mac na nakalagay bago tayo mag change mac
Punta tayo kay Security settings at ipaste ang generated nating mac,at wimax password neto
Apply then, Boom connected kana
*Self experiment ko po yan para madali lang, pero kung may suggestion kayo for fastest way, post lang kayo ng matry natin
Sana makatulong
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: