hello sirIf you are getting power but no display, it could be a problem with the monitor, cable or graphics card.
Try to check the cables and make sure they are connected properly to both the monitor and the back of the computer. If you can, try using a different HDMI or VGA cable. If the problem persists, try using the display in Safe Mode or with the onboard graphics if you have an integrated graphics chip in your CPU.
If none of those work, you might want to check your video card or the connections. If it still doesn't work, you should contact a professional for help.
bale po tinanggal ko na rin ung CMOS Battery sirMagandang araw po! Ang problema ng inyong computer na walang display ay maaaring sanhi ng ilang mga bagay. Narito ang ilang mga posibleng solusyon na maaaring subukan ninyo:
1. Tiyaking tama ang pagkakasalansan ng inyong RAM: Siguraduhin na tama ang pagkakasalansan ng inyong RAM. Subukan niyo na alisin ang RAM at linisin ang mga contact pins nito. Pagkatapos, isalansan muli ang mga ito nang maigi sa kanilang mga slot.
2. Tanggalin ang mga hindi kinakailangang kasangkapang hardware: Suubukan niyo na tanggalin ang lahat ng hindi kinakailangang hardware tulad ng graphic card at iba pang mga pci devices. Ito ay upang masigurong walang isang kasangkapang nagdudulot ng problema sa display.
3. Subukan ang ibang monitor o screen: Magamit niyo ang isa pang monitor o screen para masigurado na hindi ang inyong monitor ang may sira. I-konek niyo ang ibang monitor at tingnan kung may mag-display na.
4. Tignan ang power supply at cables: Tiyakin na tama ang pagkakakabit ng power supply at mga cables. Subukan niyo rin na palitan ang power cable at kung maaari, subukan din ang ibang power supply.
5. Tanggalin at isalansan muli ang mga cables: Tanggalin niyo ang lahat ng mga cables na konektado sa inyong computer, pati na rin ang power cable. Isalansan muli ang mga ito nang maigi at siguraduhing naka-konekta ng maayos.
6. I-reset ang BIOS: Isa pang posibleng solusyon ay i-reset ang BIOS. Maaaring may mga settings na nagkaproblema at maaaring magdulot ng walang display. Subukan niyo na tanggalin ang CMOS battery sa loob ng inyong motherboard at hintayin ng ilang minuto bago isalansan muli. Ito ay magre-reset ng BIOS settings.
Kung pagkatapos subukan ang mga solusyon na nabanggit ay hindi pa rin gumagana ang inyong display, maaring may ibang sira na hindi ninyo kayang ayusin sa inyong sarili. Maaring kailangan ninyong dalhin ang inyong computer sa isang propesyonal na teknikyan para masuri at maayos ang problema.
Since all cables are connected, the monitor is working on other computers, and you have checked the graphics card and the power supply unit, the issue could be because of the RAM or the motherboard.hello sir
all the cables is connected and the monitor is working in the other computers
paano po ireset ung bios sir?
Upang i-reset ang BIOS, maaari niyong sundin ang mga sumusunod na hakbang:paano po ireset ung bios sir?
yes sir i already change the RAM to new ram i reseated all the components in the motherboardSince all cables are connected, the monitor is working on other computers, and you have checked the graphics card and the power supply unit, the issue could be because of the RAM or the motherboard.
Try to check if the RAM is properly installed. If it's not, remove and reinsert it into the same slot. If the issue persists, try removing a RAM chip or use different RAM chips.
If all of that doesn't help, the issue might be the motherboard. The damage caused by dust or other objects can create problems in the hardware.
thank you for the info sirUpang i-reset ang BIOS, maaari niyong sundin ang mga sumusunod na hakbang:
1. Patayin ang inyong computer at tanggalin ang power cord mula sa power outlet.
2. Hanapin ang CMOS battery sa inyong motherboard. Ito ay isang maliit na bilog na baterya na kadalasang kulay silver o yellow. Maaaring nakadikit ito sa motherboard o may sariling plastic clip o bracket.
3. Gamit ang isang malumanay na kamay o isang maliit na tuwalya o tissue, tanggalin ang CMOS battery mula sa kanyang slot sa motherboard. Kung may plastic clip o bracket, i-unclip ito bago tanggalin ang battery.
4. Hintayin ng ilang minuto bago isalansan muli ang CMOS battery sa kanyang slot. Tiyaking maayos itong naka-konekta sa mga contact points ng slot.
5. Isaksak muli ang power cord sa power outlet at i-power on ang inyong computer.
6. Ang pagtanggal at pagsalansan muli ng CMOS battery ay magre-reset ng BIOS settings. Sa pagbukas ng computer, ang BIOS ay magre-reset sa default configuration.
Tandaan na ang pag-reset ng BIOS ay maaaring mabago ang ilang mga setting at konfigurasyon sa inyong computer. Maaaring kailangan niyong i-adjust ang mga ito pagkatapos ng pag-reset ng BIOS.
Kung ang inyong computer ay hindi gumagana pa rin matapos ang pag-reset ng BIOS, maaaring may ibang sira na hindi ninyo kayang ayusin sa inyong sarili. Maaring kailangan ninyong dalhin ang inyong computer sa isang propesyonal na teknikyan para masuri at maayos ang problema.
Welcomeyes sir i already change the RAM to new ram i reseated all the components in the motherboard
thank you for the info sir
kapag ayaw parin sir saka ko idedeclare na board sirWelcome
If all previous steps have been followed and the problem still exists, then there probably is a problem with the motherboard.kapag ayaw parin sir saka ko idedeclare na board sir
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?