Closed CLOSED

[TwingklingWatermelon]

ASAP po sana kase bigla nalang po nawala ung ram ko eh may roon namn po siyang ram naka salpak namn po at nilgay ko na din po sa slot 2 ganun paden ayaw paden eh
una po may lumalabas po na "A device which does not exist was specified" kapag pinipindot kopo ung Local Disk (F po ata un nalimutan ko na ano name tas bigla nalang po siyan nawala nuong tinary ko ito

• STEP 1. Open up a command window, also make sure that you run it with administrator privileges
• STEP 2. Now Launch Diskaprt Utility using the below command

diskpart

• STEP 3. To see all the disks execute the below command

list disk

• STEP 4. Once you know which disk has to be partitioned, simply execute the below command

select disk 0

• STEP 5. Now completely clean it by the below command

clean

• STEP 6. Now execute the below command just to make sure that the disk is still selected

list disk

• STEP 7. Make the partition Primary by following the below command

create partition primary

• STEP 8. Now select the newly created primary partition

select partition 1

• STEP 9. Activate the partition

active

• STEP 10. Using the below command we will format it with NTFS and assign a label to the partition

format FS=NTFS label=Data quick

• STEP 11. Assign a letter to the partition

assign letter=g

• STEP 12. Finally, exit the disk part

exit

• STEP 13. Hopefully, your issue has been resolved

4. Replace the Hard Disk​

If any of the above methods fail to work then this device cannot start. (code 10) a device which does not exist was specified. windows 10 issues are very critical either contact customer care or you have to replace the hard disk with a new one. There arent any other methods that can help You do not have permission to view the full content of this post. Log in or register now..

files ko h

 

[Pen_J]

View attachment 2148034eto po ung hidden nya po ung unkown lang ponawal un isa

Kailangan siyang i-reconnect physically. Shutdown ang computer, disconnect si HDD, restart ang computer para ma-rehistro na walang nakasaksak sa slot, shutdown uli tapos i-plug na si HDD para ma-detect siya uli sa pag-restart ni Windows. Ganito ang itsura ni HDD.
Pwede mo nang i-swap yung dalawang SATA cable connections sa motherboard, para magpalit yung Disk 0 at Disk 1.

 

[TwingklingWatermelon]

Kailangan siyang i-reconnect physically. Shutdown ang computer, disconnect si HDD, restart ang computer para ma-rehistro na walang nakasaksak sa slot, shutdown uli tapos i-plug na si HDD para ma-detect siya uli sa pag-restart ni Windows. Ganito ang itsura ni HDD.
Pwede mo nang i-swap yung dalawang SATA cable connections sa motherboard, para magpalit yung Disk 0 at Disk 1.

View attachment 2148048

bat po ganun naingay ung HDD ko?

 

[Pen_J]

bat po ganun naingay ung HDD ko?

Paanong naingay?

 

[TwingklingWatermelon]

Paanong naingay?

basta parang sipol eh

basta parang sipol eh

tapos ang tgal nya mag open lage pero nuong tinangal ko hdd sa connect nya ang bilis nya mag open

 

[Justchillbruh122]

baka defective na ang hdd mo or low in health. try using hdd sentinel to see the health of your hdd.

 

[Pen_J]

basta parang sipol eh


tapos ang tgal nya mag open lage pero nuong tinangal ko hdd sa connect nya ang bilis nya mag open

Nire-read kasi siya ni computer sa starting, hindi siya ma-recognize kaya matagal mag-start.
Hindi ba siya nabagsak?

 

[TwingklingWatermelon]

Nire-read kasi siya ni computer sa starting, hindi siya ma-recognize kaya matagal mag-start.
Hindi ba siya nabagsak?

hindi po nabagsak to..

ganun paden po wla paden siya

 

[Pen_J]

hindi po nabagsak to..

ganun paden po wla paden siya

Nai-reconnect mo na siya?
Pa-screenshot uli ni Disk Management.

 

[TwingklingWatermelon]

Nai-reconnect mo na siya?
Pa-screenshot uli ni Disk Management.

na ireconnect ko na po siya


btw na scan for hardware change ko na po siya also naka show hidden naden po yan

na ireconnect ko na po siya


btw na scan for hardware change ko na po siya also naka show hidden naden po yan

ung sata cable kopo is 30V po diko alam san sa SATA1 OR 2 nilagay ko siya sa 1 now

 

[Pen_J]

na ireconnect ko na po siya


btw na scan for hardware change ko na po siya also naka show hidden naden po yan
View attachment 2148083


ung sata cable kopo is 30V po diko alam san sa SATA1 OR 2 nilagay ko siya sa 1 now

TS, yung screenshot ng Disk Management.

 

[TwingklingWatermelon]

TS, yung screenshot ng Disk Management.

 

[Pen_J]

View attachment 2148102

So, dati pa rin ang connection niya. Right click mo si Disk 0 tapos pa-screenshot.

 

[TwingklingWatermelon]

So, dati pa rin ang connection niya. Right click mo si Disk 0 tapos pa-screenshot.

 

[Pen_J]

View attachment 2148106 View attachment 2148107 View attachment 2148108

Click mo yung Properties, sa Drivers tab check mo yung options kung may Enable. Pa-screenshot uli.

 

[TwingklingWatermelon]

Click mo yung Properties, sa Drivers tab check mo yung options kung may Enable. Pa-screenshot uli.

Click mo yung Properties, sa Drivers tab check mo yung options kung may Enable. Pa-screenshot uli.

yan po

 

[Pen_J]

View attachment 2148131

Magawa mo yung diskpart, select Disk 0, tapos cleen at assign drive letter=G? Break lang ako para kumain.

 

[TwingklingWatermelon]

Magawa mo yung diskpart, select Disk 0, tapos cleen at assign drive letter=G? Break lang ako para kumain.

hindi daw naka connect eh? tama ba ako ?

hindi daw naka connect eh? tama ba ako ?

Magawa mo yung diskpart, select Disk 0, tapos cleen at assign drive letter=G? Break lang ako para kumain.

 

[Pen_J]

hindi daw naka connect eh? tama ba ako ?

View attachment 2148162

Baka may problema sa cable niya. Shutdown mo uli yung computer at i-reseat yung cable sa motherboard side at sa drive side. restart mo at check kung connected na siya.

 

[TwingklingWatermelon]

Baka may problema sa cable niya. Shutdown mo uli yung computer at i-reseat yung cable sa motherboard side at sa drive side. restart mo at check kung connected na siya.

pag palitin ko po?

 

[Pen_J]

pag palitin ko po?

Huwag muna, yun munang HDD, reseat mo parehong side ng cable, reseat mo din yung power supply cable (yung may wires na red,yellow at black).