What's new
Status
Not open for further replies.

remhaj

Eternal Poster
Joined
Dec 11, 2015
Posts
673
Reaction
1,094
Points
311
Acer Z500 Error flashing via SPFT,

brom error s_ft_download_fail (4008). ganyan yung lumalabas na dedetect naman siya tapos lalabas yung red progress bar then hindi na tutuloy sa pag flash. I allready tried many Stock Firmware for this phone and SPFT versions even different FLASHER TOOLS pero error parin built in po yung battery niya,


"" normal lang ba na pag connect sa pc umiilaw yung BLUE LED"" ? Sana matulungan niyo ako please.
 
please read this
:)
mysupport_notsolved.png [Fix] Fix SP Flash BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)

This error 4008 is generally caused when trying to flash a ROM or partition that isn't correctly addressed in the scatter. Either the scatter is addressing the image to flash at a spot that doesn't correspond with the partition setup, or the image is larger than what's specified in the scatter.

Repair SP Flash Tool BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)

To fix this error SP Flash Tool error 4008:

  • ensure that you're using the latest version of SP Flash Tool. As of this post, the newest version of SP Flash Tool is 5.1520 and 3.1520.
  • Make sure you're using the correct scatter for what you're trying to flash. For example, if you're trying to flash a recovery.img, use the scatter that came with the recovery. If you're trying to flash a custom ROM, make sure you're using the scatter that came with it.
 

Attachments

Last edited by a moderator:
ito po mas better gawin. if nabrick po ang device & di ka sure kung hard bricked ba ito or bootloop lang.

volum up+ power button + home button at the same time hold nyo while nakaoff si cp
(or search 'how to access stock recovery on <name ng device unit>')


pag naaccess nyo yon. factory reset lang & clear data and dalvik cache. then reboot.

baka po di pa error yung mga files sa ng stock rom nyo. 5-10mins yan reboot time nya. bale good as new.


if hindi naman po nagwork. segway nyo is flash new custom rom & custom recovery.

sa xda forums kayo maghanap ng custom rom since tested nila yung nilalapag and yung mga hindi tested naman ay nacclosed thread at di navview. goodluck po.


➡ google for downloading the materials
➡ YøùTùbé for demo
.
 
Ang mga posibilidad na problema po ay ang.
Drivers. Sa pag install sa pc.
Spflash tool. Hindi match sa Cp mo.
Hanap ka ng iba.

At sa lahat. Firmware din hanap ka rin ng iba.
Kung hindi gumagana.
Yang firmware mo.
Or sa Scrater file.
Me mali or kulang sa location ng IMG file.

info lang po.
;)
 
Ang mga posibilidad na problema po ay ang.
Drivers. Sa pag install sa pc.
Spflash tool. Hindi match sa Cp mo.
Hanap ka ng iba.

At sa lahat. Firmware din hanap ka rin ng iba.
Kung hindi gumagana.
Yang firmware mo.
Or sa Scrater file.
Me mali or kulang sa location ng IMG file.

Try mo low version ng spflash or update.
Load mo si scrater mo. Pag wala talaga hanap ka iba firmware.

info lang po.
;)
 
Ang mga posibilidad na problema po ay ang.
Drivers. Sa pag install sa pc.
Spflash tool. Hindi match sa Cp mo.
Hanap ka ng iba.

At sa lahat. Firmware din hanap ka rin ng iba.
Kung hindi gumagana.
Yang firmware mo.
Or sa Scrater file.
Me mali or kulang sa location ng IMG file.

info lang po.
;)
 
Na try ko na po yung ibang stock firmware na galing sa pinagkukunan ko talaga ng mga firmware, i haved complete firmware flasher even box ***** and doungle, i allready installed drivers correctly pero ganon parin,
lagi ako nag proprogram ng mga android phones pero ngayon lang ako nahirapan ng ganito.
 
hindi po siya bricked bootloop lang po siya kaya lang hindi na ma access yung recovery
 
Hanap ka po sa GSM forum. Sa need room
Pero mas better sa GSM ka Kasi nandun lahat ng firmware ng mga Android naten. Mga technicians kasi mga tao dun ng android.
 
na try ko na yung firmware na galing sa gsmhosting and phcorner pero ganon parin, na try ko narin po yung full dump ayaw talaga.
 
Hangang logo lang bang ba siya?
Then restart lang ng restart ang android mo?
Then nag flash ka successful naman pero ganun parin?
Kung ganyan sa EMMC na yan sir.

Pero kung broom error lang.
Try mo low version ng spflashtool at updated.
Or baka sa drivers mo. Wag mo e auto install sa PC.
Mag manual install ka ng drivers sa pc.
Para sure detected talaga.

Ganyan kasi ginagawa ko kapag ayaw sa auto install ng driver manual nalang
 
hindi naman siya nag rerestart talagang stuck lang, pero i think hindi po EMMC to eh, hindi ko lang po talaga alam kung bakit nag error
 
Status
Not open for further replies.
Back
Top