unang una may nag post na ng tutorial nato dito. but hindi complete and ni delete niya din..
nagpaalam din po ako sa author nito.. credits to freddy3k
to the staff if repost ito paki delete nalang thank you .. (but i did searched the forum and ito lang nakita ko 936 admin access )
this procedure is for admin access globe firmware but other special function such as APN seting SMS FTP etc etc are not accessible maybe because of the config file we have used or globe firmware has intentionally blocked or hidden it..
before we start make sure your modem is in USB mode this means green light steady else search other thread on how to put your modem in usb mode..
usb mode
open any AT terminal you prefer
type this command
at^datalock="your_code_here"
at^sfm=1 <== this will set your modem to factory mode
then
AT^reset <== this will reset your modem wait lang mag steady power light only
now manual IP mo Ethernet mo 192.168.1.1
now run the config updater already posted ko na yan hanapin nyo na lang
after a successfull updating ng config
go to telnet and type again
at^sfm=0 <=== this command will kick your modem out to factory mode
AT^reset <== obvious naman na alam na natin kung para saan to :thumbsup:
after that wait for your modem to reboot to normal mode
after reboot login as ADMIN:ADMIN
then go to setting click restore default
after mag reboot ng modem for the second time try logging in again as admin
all done...
PS:
ginawa ko lahat yang procedure na yan sa tatlong modem at naka salpak ang sim..
at dahil sinsitibong command yan mga yan i am not responsible kung ano man mangyare sa modem nyo
do this at your own risk..
di ko kasi makita yung ATTACH FILE or wala akong option para doon kasi newbie palang ako kaya inupload ko nalang sa ibang uploading site..
You do not have permission to view the full content of this post. Log in or register now.
nagpaalam din po ako sa author nito.. credits to freddy3k
to the staff if repost ito paki delete nalang thank you .. (but i did searched the forum and ito lang nakita ko 936 admin access )
this procedure is for admin access globe firmware but other special function such as APN seting SMS FTP etc etc are not accessible maybe because of the config file we have used or globe firmware has intentionally blocked or hidden it..
before we start make sure your modem is in USB mode this means green light steady else search other thread on how to put your modem in usb mode..
usb mode
open any AT terminal you prefer
type this command
at^datalock="your_code_here"
at^sfm=1 <== this will set your modem to factory mode
then
AT^reset <== this will reset your modem wait lang mag steady power light only
now manual IP mo Ethernet mo 192.168.1.1
now run the config updater already posted ko na yan hanapin nyo na lang
after a successfull updating ng config
go to telnet and type again
at^sfm=0 <=== this command will kick your modem out to factory mode
AT^reset <== obvious naman na alam na natin kung para saan to :thumbsup:
after that wait for your modem to reboot to normal mode
after reboot login as ADMIN:ADMIN
then go to setting click restore default
after mag reboot ng modem for the second time try logging in again as admin
all done...
PS:
ginawa ko lahat yang procedure na yan sa tatlong modem at naka salpak ang sim..
at dahil sinsitibong command yan mga yan i am not responsible kung ano man mangyare sa modem nyo
do this at your own risk..
di ko kasi makita yung ATTACH FILE or wala akong option para doon kasi newbie palang ako kaya inupload ko nalang sa ibang uploading site..
You do not have permission to view the full content of this post. Log in or register now.