Closed ZTE MF283+ OpenWRT [solved]

[joker09]

Kahit openline na sya globe lang? Pa link ng Config paps

yes po. Ilang try and test po yong ginawa ko, wa epek yong smart sa kanya kahit openline.

 

[Ayase Idaichi]

Na figure out ko na kung bakit di ko malogin yung luci/ssh. May something na bug sa LAN ng laptor or sa mismong device, need nakatanggal LAN during boot, tapos dun lang isasaksak immediately yung cable after magboot(blue light sa 4G/LTE led indicator) at magset ng Static IP sa ethernet since ayaw nya talaga mag auto assign ng IP saken.. lagi lumalabas yung Unidentified Network instead na CPE_xxxxxx, dapat nasa loob ng 192.168.1.0/24 yung ip(ex. 192.168.1.6), /24 subnet (255.255.255.0) and gateway 192.168.1.1.

 

[joker09]

View attachment 2196098
View attachment 2196099

Na figure out ko na kung bakit di ko malogin yung luci/ssh. May something na bug sa LAN ng laptor or sa mismong device, need nakatanggal LAN during boot, tapos dun lang isasaksak immediately yung cable after magboot(blue light sa 4G/LTE led indicator) at magset ng Static IP sa ethernet since ayaw nya talaga mag auto assign ng IP saken.. lagi lumalabas yung Unidentified Network instead na CPE_xxxxxx, dapat nasa loob ng 192.168.1.0/24 yung ip(ex. 192.168.1.6), /24 subnet (255.255.255.0) and gateway 192.168.1.1.

Sakin oks naman pero nirereplug ko lang yong lan tas oks na.

Anong sim to lods, natry mo na ang smart?. Sakin kasi ayaw ang smart pero openline naman.

 

[Ayase Idaichi]

Sakin oks naman pero nirereplug ko lang yong lan tas oks na.

Anong sim to lods, natry mo na ang smart?. Sakin kasi ayaw ang smart pero openline naman.

wala ako smart sim, pero tnt ok naman

 

[aspaciop]

nice nice

 

[AGM]

may alam po ba dito kung pano mag band lock or cell id lock via at command?

 

[specialforcecbt01]

Up

 

[okai24]

Sakin nagwork ang lte using uqmi at ncm pero globe lang.

+ Add config within the network/config directory

paano mo napagana amo yong internet from simcard sir. ?

Thanks sa insights, yes inantay ko talaga yung bootup kahit lagpas 10min na, pero wala ako narereceive na 192.168.x.x ip sa ipconfig and hindi ko rin ma-access si LuCi dashboard nung time na yun

sir napagan nyu ba simcard LTE?

Kahit openline na sya globe lang? Pa link ng Config paps

pa link po boss.. salamat

 

[okai24]

Sakin nagwork ang lte using uqmi at ncm pero globe lang.

+ Add config within the network/config directory

lodz paano config ?

 

[joker09]

Search mo lang Git ng Mf283plus. Nandun lahat yong config

 

[PHC - Freenet]

View attachment 2196098
View attachment 2196099

Na figure out ko na kung bakit di ko malogin yung luci/ssh. May something na bug sa LAN ng laptor or sa mismong device, need nakatanggal LAN during boot, tapos dun lang isasaksak immediately yung cable after magboot(blue light sa 4G/LTE led indicator) at magset ng Static IP sa ethernet since ayaw nya talaga mag auto assign ng IP saken.. lagi lumalabas yung Unidentified Network instead na CPE_xxxxxx, dapat nasa loob ng 192.168.1.0/24 yung ip(ex. 192.168.1.6), /24 subnet (255.255.255.0) and gateway 192.168.1.1.

lods ayaw mag tuloy ng flashing sakin using tftpd method
sineset q sa ipv4 ip address: 192.168.0.22 subnetmask: 255.255.255.0 default gateway: 192.168.0.1

error sa logs ni tftpd

ito ung error sakin lods baka me makaka tulong salamat

 

[Ayase Idaichi]

lods ayaw mag tuloy ng flashing sakin using tftpd method
sineset q sa ipv4 ip address: 192.168.0.22 subnetmask: 255.255.255.0 default gateway: 192.168.0.1

error sa logs ni tftpd

View attachment 2449558

ito ung error sakin lods baka me makaka tulong salamat

Kung saan mo nilagay yung tftpd.exe mo (wag mo kalimutan irun as Administrator), doon mo rin ilalagay root_uImage mo

 

[PHC - Freenet]

Kung saan mo nilagay yung tftpd.exe mo (wag mo kalimutan irun as Administrator), doon mo rin ilalagay root_uImage mo

ganun nawa q lods ayaw talaga

 

[Ayase Idaichi]

ganun nawa q lods ayaw talaga

Reset mo yung modem tapos redownload ka ng firmware, ginamit ko yung firmware na nandito sa thread (globe stock firmware, for unbricking daw)

dl link: You do not have permission to view the full content of this post. Log in or register now.
pass: mf283+_ghandz
credits: here

 

[PHC - Freenet]

Reset mo yung modem tapos redownload ka ng firmware, ginamit ko yung firmware na nandito sa thread (globe stock firmware, for unbricking daw)

dl link: You do not have permission to view the full content of this post. Log in or register now.
pass: mf283+_ghandz
credits: here

salamat lods tatry q to

Reset mo yung modem tapos redownload ka ng firmware, ginamit ko yung firmware na nandito sa thread (globe stock firmware, for unbricking daw)

dl link: You do not have permission to view the full content of this post. Log in or register now.
pass: mf283+_ghandz
credits: here

kelangan ba lods naka stock firmware bago mag flash ng openwrt?

 

[Ayase Idaichi]

kelangan ba lods naka stock firmware bago mag flash ng openwrt?

from personal experience ko oo, kasi yung binili ko yung modem ko naka debranded firmware ayaw magflash ng openwrt, ginawa ko binalik ko sa globe stock firmware dun ko lang sya naflash.

 

[PHC - Freenet]

from personal experience ko oo, kasi yung binili ko yung modem ko naka debranded firmware ayaw magflash ng openwrt, ginawa ko binalik ko sa globe stock firmware dun ko lang sya naflash.

sige lods try q salamat feedback aq pag napagana q

from personal experience ko oo, kasi yung binili ko yung modem ko naka debranded firmware ayaw magflash ng openwrt, ginawa ko binalik ko sa globe stock firmware dun ko lang sya naflash.

Lods after ba ma balik sa stock firmware need pa din i reset muna ang modem bago mag flash ng openwrt?

Anu sinet mo sa static ip same ba sa pag flash mo ng stock firmware?

aya pa din lods error pa din ung logs ni tftpd

mf283+ globe stock You do not have permission to view the full content of this post. Log in or register now.

salamat dito lods ung sakin naka stock firmare na ayaw mag flash ng openwrt

anu nilagay nyo sa ipv4 tingin q dun kaya ayaw mag tuloy ng flash

 

[Ayase Idaichi]

anu nilagay nyo sa ipv4 tingin q dun kaya ayaw mag tuloy ng flash

192.168.0.22 parin static ip nyan, any firmware pare parehas lang ng tftpd setup.
Check mo rin pc mo, patayin mo windows defender mo para wala kang problema sa tftpd.
Double check mo na rin na dapat iilaw yung LAN indicator ng modem mo para malaman mo kung ok yung connection from pc to modem.

 

[PHC - Freenet]

192.168.0.22 parin static ip nyan, any firmware pare parehas lang ng tftpd setup.
Check mo rin pc mo, patayin mo windows defender mo para wala kang problema sa tftpd.
Double check mo na rin na dapat iilaw yung LAN indicator ng modem mo para malaman mo kung ok yung connection from pc to modem.

na ilaw naman lods ung lan indicator ganan talaga nalabas hehe hanggang ngaun di q pa mapagana ung openwrt sa modem ko

 

[Ayase Idaichi]

na ilaw naman lods ung lan indicator ganan talaga nalabas hehe hanggang ngaun di q pa mapagana ung openwrt sa modem ko

View attachment 2452504

double check mo sa directory ng tftpd server mo kung merong file extension yung root_uImage mo, baka nakasave as root_uImage.bin yung firmware mo instead na root_uImage