The Real One
Forum Expert
- Joined
- May 8, 2013
- Posts
- 2,009
- Reaction
- 15,467
- Points
- 2,487
- Age
- 32
General Info:
Software Version: 10.0.15063.0 the Version 1703
assembly Author : m0nkrus
Language: English / Russian
Treatment: complete
System Requirements:
* Processor at least 1 GHz or of SoC
* 1 GB RAM (32-bit) or 2 GB RAM (64 systems-bit)
* 16 GB (32-bit) or 20 GB (64-bit)
* Video card with support for DirectX 9 or higher and 1.0 driver, a WDDM
* Display with a resolution of 800 x 600
Description:
This assembly is the successor build Windows 10 (v1607) RUS-ENG x86- x64 -20in1- KMS-activation (AIO) and combines Russian and english 32-bit and 64-bit edition under the general united of distribution. In the assembly, we have implemented a number of interesting solutions, which made it possible to obtain a compact product that combines the functionality of sixteen official distribution. When this functionality is installed with the assembly operating systems has not been cut down any grand!
Composition of assembly
Assembly includes 10 Russian and 10 English editions of Windows 10 for 32-bit (x86) and 64-bit (x64) core:
- Windows 10 Enterprise x64 Russian
- Windows 10 Enterprise x64 English
- Windows 10 Enterprise the x86 Russian
- Windows 10 Enterprise the x86 English
- the Windows 10 Education x64 Russian
- the Windows 10 Education x64 English
- the Windows 10 Education the x86 Russian
- the Windows 10 Education the x86 English
- the Windows 10 Professional x64 Russian
- the Windows 10 Professional x64 English
- the Windows 10 Professional the x86 Russian
- the Windows 10 Professional x86 English
- Windows 10 Home x64 Russian
- Windows 10 Home x64 English
- Windows 10 Home the x86 Russian
- Windows 10 Home the x86 English
- Windows 10 Home Single the Language x64 Russian
- Windows 10 Home Single the Language x64 English
- Windows 10 Home Single the Language the x86 Russian
- Windows 10 Home Single Language x86 English
Some features of the assembly
- At the heart of the assembly are distributions of Windows 10, posted on MSDN eleventh in April 2017.
- At an early stage there is a pre-boot setup menu where you can select the capacity of the primary shell, that is how the installer will be used, 32-bit or 64-bit. Because of this, you should not worry that the 64-bit version of the OS can not stand on the RAID, and that its users may be without service recovery system.
- With the installation media to delete the folder \ Sources \ SXS, which were packed files to manually install packages local .NET Framework 3.5 and Internet Explorer 11. But that does not mean that the local install these packages will be impossible. In the folder \ Support \ NetFx35 placed compact and easy to use .NET Framework 3.5 installer for Windows 10, and in the folder \ Support \ MsIE11 - Internet Explorer 11. Installer
- The assembly includes an ac†ïvâ†ør AAct 3.2 Portable from Ratiborus. Ac†ïvâ†ør shortcut to the executable file named "KMS-activation" will be available in the "Start" menu. With this ac†ïvâ†ør can be activated not only Windows, but and Office 2010/2013/2016 VL.
- The service recovery system as in triggered from the installation media, so the built in the system itself, the module is integrated Microsoft Diagnostics and Recovery Toolset (MSDaRT) 10, which greatly enhances the resuscitation system.
- Fixed a feature of Windows Installer, 10, because of which in the multilingual assembly, when you run Setup from under the existing system, there was no choice of the installer interface language. In this assembly that choice is available.
- After installation, you will be able to switch the interface language from English to Russian and back standard means Windows 10 (except Home Single Language edition).
- At Home Single Language edition added a script that allows you to switch the interface language from Russian into English and vice versa with no loss of license.
- Restored the functionality of the boot menu by pressing the F8 key when the computer starts.
- Because with the fact that the assembly is a combined x86-x64-distribution, but still having on board more than one language, a series of standard options for system installation of the assembly is not available. The following options settings: the installation media with both the loading device in BIOS Legacy mode both 32-bit and 64-bit operating system; from the installation media with both the loading device in EFI / UEFI mode only for the 64-bit operating system; out of the existing system in the format of a custom installation in the BIOS Legacy mode for both 32-bit and 64-bit OS. For the latter to initiate the installation from the 64-bit operating system, it is not necessary to start setup.exe through a root of the media with the distribution, and through setup.exe, which is located in Sources folder distribution. Autorun installation media when you run out of an existing operating system, select the desired type of launch itself.
- Made minor changes in the installer interface, correcting flaws Microsoft programmers.
Differences from the build of Windows 10 (v1607 RUS-ENG x86-x64 -20in1- KMS-activation (AIO)
- Assembly actually remade from scratch based on the updated Linux distributions, Microsoft released the eleventh April 2017.
- From the assembly for technical reasons excluded edition of Windows 2016 Enterprise 10 LTSB.
- In order to maintain continuity in the number of editions in the assembly, it includes Windows 10 version of Education.
- Restored the functionality of the boot menu by pressing the F8 key when the computer starts.
- Previously used in assembly ac†ïvâ†ør KMSAuto Net 1.4.9 is replaced by AAct 3.2 Portable.
FAQ
Question: What is the difference from each other different wording?
Answer: In Microsoft pile a good comparison chart of different editions of Windows 10 .
Question: What is the edition of Home Single Language? It is, in fact, a copy of the basic version of Home, but with the restriction on the change of the display language.
Answer: The fact that this particular edition of mostly pre-installed on laptops. And if you want to reinstall Windows 10 on a laptop with no loss of license, then you need just one.
Question: Why in this build, unlike its predecessor, no LTSB-editions, and their place was taken by the editorial board Education?
A: The algorithm combined package distributions is that the more of the same files in merged versions, the smaller the size of the final distribution. Edition also marked LTSB, unlike all the others, has not been updated in April 2017. Different versions of the original distribution - lots of different files. And as a result, an unacceptable increase in the critical size of the assembly, when combined LTSB-editions with other past updates. Therefore, they are replaced by the amended Education, the last update process, as well as others.
Question: What cut or modified in the system installed with this assembly? What programs / tweaks added?
Answer: The system added ac†ïvâ†ør AAct 3.2 Portable from Ratiborus. The recovery service, built-in, integrated MSDaRT 10. At Home Single Language edition added a script that allows you to switch the interface language. Restored functionality of the boot menu by pressing the F8 key when the computer starts. Nothing else. For gifted clarify: any system updates in the assembly is not integrated!
Question: Are there any restrictions on the installation there, except the system requirements?
Answer: Yes, there is. To start the installation of the new system in EFI / UEFI mode, out of the existing system is not possible. Launching system installation out of the existing system in the format of the old system updates impossible. Installing a 32-bit system to EFI / UEFI mode (usually need to be installed on the tablet) is not possible. Installing a 32-bit system using a 64-bit installer is not possible.
Q: You wrote that in this assembly can not install the update because under the existing system, but you can initiate a Custom installation. What is the difference between updates and custom installation?
A: When you install the update, all files, programs, settings, operating system installed earlier, if possible (if they are compatible), will be integrated into the new OS. But, also, I would like to note that all file system errors, registry, etc. also can go to the new OS. A custom installation on top of the old operating system, the entire contents of the OS is stored on the system HDD / SSD Windows.Old section in the folder, from where it is then, if necessary, can be transferred to a freshly installed OS. After "pulling" of the desired content, Windows.Old folder can be safely removed.
Q: Which program you can recommend to deploy the assembly to the stick?
A: For these purposes, I highly recommend the program Rufus . This is the only known me a program that helps you deploy the assembly on a USB flash drive that has been formatted in NTFS, without losing the ability to install it in EFI / UEFI mode. And do not touch once again setting - the program knows which mode is optimal for the image.
Q: I did not receive pre-boot menu with a selection of the bit installer. Why?
A: Your computer supports the installation of the EFI mode / UEFI and chose this mode for installation. Installation in EFI / UEFI with this assembly is only possible by means of 64-bit installer, and therefore there is no choice.
Question: At the initial stage of the installation I get the message "The system seems to lack either network cards or network drivers". What is it?
Answer: This is a notice that the installer did not find the active network card. This may be due to her lack of physical computer, and the absence in the driver installer for your specific model of network card. In any case, do not worry. Installation and operation of the system is not affected. Click OK, and then quietly continue with the installation.
Question: I need a setting in the BIOS mode to Legacy MBR-section, and the system is in the EFI / UEFI mode GPT-section. What to do?
Answer: Go to UEFI-BIOS and change the settings there, responsible for the selection of setting mode. The UEFI-BIOS of different manufacturers of the names and locations differ. But in the network, there are more or less detailed descriptions of how to do this for different models UEFI-BIOS. If all extremely hard, and you can not find the desired option, then simply remove from the assembly bootmgr.efi file and folder efi. This would deprive the assembly installation starting opportunities in EFI / UEFI mode, and it will have to run the installation in the BIOS Legacy mode.
Question: I need to install EFI / UEFI mode GPT-section, and the system is in the BIOS Legacy mode, the MBR-section. Why?
Answer: First of all, your computer may not support the installation of the system in EFI / UEFI mode. Secondly, in the UEFI-BIOS can be disabled options that are responsible for the ability to install in this mode . Third, if you set the system from a USB drive, be aware that the EFI / UEFI mode can only be set if the flash drive is formatted as FAT32 (or NTFS using the program Rufus ).
Q: I did not understand that auto-activation, as it was in builds of Windows 7 / 8.x, no? Now just invested ac†ïvâ†ør and run it, you must manually? Why is that?
A: Too many users installing Windows 10 before you upgrade your old system, were able to free activation. Binding was carried out in the computer "gland". And now, back to the activation when reinstalling the system, they just install the operating system and connect to the Internet. "Left" avtoaktivatsii they do not need. Therefore, in order to take into account their interests and the interests of those who prefer to decide what and how to activate it, all the same ac†ïvâ†ør in the assembly included (fortunately, they can be activated and Office), but it needs to be run manually. Just once!
Q: Earlier in your assemblies you used KMSAuto Net or Lite. Now it AAct! Why are your preferences changed?
Answer: I have checked all of these ac†ïvâ†ørs to VirusTotal service and found out that at the time of release build antivirus Microsoft is not only responds to AAct. So that the ac†ïvâ†ør was not destroyed integrated Antivirus at the first update of the system, I have stopped the choice on AAct.
Question: How to use the built-in ac†ïvâ†ør?
Answer: There is nothing complicated. Run actuator with label "KMS-activation", which is located in the "Start" menu, and you simply select the activation mechanism. Ac†ïvâ†ør The interface is intuitive and it will be presented in the language in which you installed the system. Since the activation of this method is only temporary, it can be either some time to reactivate the system manually or automate the process. To automate click in the lower left corner of the ac†ïvâ†ør on the gear icon in the circle, tick "Create a task to activate Windows" (Create Windows reactivation task) and click "Accept" (Ok) in the opened tab. After that, the system will automatically pereaktivirovatsya.
Q: I do not know how, but I flew activation, produced with the help of the ac†ïvâ†ør included in the assembly, and now the computer displays that my copy of Windows is not genuine. Why do such a thing could happen? How to solve a problem?
Answer: Start with an ac†ïvâ†ør label "KMS-activation", which is located in the "Start" menu and reactivate the OS with it. If you do not find an ac†ïvâ†ør system, so your antivirus or (in Windows 10 and has a built-in antivirus) found ac†ïvâ†ør dangerous and removed it, or you are somewhere namudrili. In this case, search the network ac†ïvâ†ør AAct Portable version of Ratiborus fresher and activate the OS with it.
Q: How can I, when using only the distribution, without having to connect to the network to install .NET Framework 3.5 package?
A: From an administrator run the installer <drive letter of the installation media>: \ support \ NetFx35 \ dotNetFx35_W10_1703_x86 -x64.exe and follow the installation wizard.
Q: You wrote that once the system is installed with two languages. But after installing the English version of Windows 10, in the available languages on the list I see only English. How so?
Answer: Yes, indeed, there is. But this is only a minor drawback, no more. Russian language, as I said, is also installed. Just do not appear in the list. When the language selection window interface, click on the button "Add a language" and choose among the other Russian. All can enjoy! The whole procedure can even be done offline, because the language is already installed and in addition it ofsayta download is required.
Q: How can I use a script to change the interface language Home Single Language editions?
Answer: Run the script with the label "LngSwitcher for Windows 10 SL", which is located in the "Start" menu. Then the script you just ask if you really want to change the interface language, and whether to restart the computer immediately after making changes, or later.
Q: I do not know for what reason, but the language interface tile applications I have is different from the language of the interface of the system. How to fix it?
Answer: Start the application "Store" (Store). In the window that opens, click on the profile icon (next to the search box) and in the drop-down menu, select "Downloads" (Downloads). In the window that opens, click "Check for Update" (Check for updates), and the necessary language packs for the tiles are downloaded automatically. If there is something after this procedure, there are not in the language, then this application either does not exist in the desired language of your choice, or to switch the interface language is carried out in the program settings manually, or you must first remove the application and then re-install it, but on the other language.
Question: I want to completely change the interface language in the framework of the available language packs in the assembly. What do I need to do?
Answer: Run "Control Panel" (Control Panel) and by going under "Language" (Language), using the "Up" (Move up) and "Down" (Move down) Earn your chosen language was in the first line. In the left pane, click on "Change date formats, times, and numbers" (Change date, time, or numbers format) and clicking on the "Advanced" (Administrative), click on "Copy parameters ..." (Copy settings ...). In the window, making sure that the "Current User" (Current user) interface language, input and format (display language, input language, format ) match your aspirations, put a checkmark in the "Welcome screen and system accounts" (Welcome screen and system accounts) and "New user accounts" (New user accounts). When saving these settings you will be offered to restart the system. Do it. In fact, here in the window, the regional settings still possible to change the language format, language programs that do not support Unicode, and your location. But this is optional and necessary. Also, you may need to change the interface language of tiled applications according to the instructions provided in the preceding paragraph FAQ.
Image size and CRC
Image size: 4.23 GB (4,544,135,168 bytes)
MD5 sum-image: d17da8176005986e907e75ccc8613474
SHA1-amount image: e3db511b2a6adf018fde91e7cb0d47c267e327b0
Screenshot
Download Link
You do not have permission to view the full content of this post. Log in or register now.
