XxLuckyPat-cherxX
Eternal Poster
- Joined
- Feb 3, 2018
- Posts
- 1,269
- Reaction
- 406
- Points
- 433
WIBR+ - WiFi häçking Tool For Android
SecurityTools
WIBR+ is an android app that is capable of *****ing
WiFi passwords. It was designed to test the security of
the WPA/WPA2 PSK WiFi networks, but now it is
widely being used to ***** weak WiFi passwords.
It supports two types of attacks -- Dictionary Attacks ,
and Bruteforce Attacks . And it supports custom
dictionaries!
If you don't know anything about Dictionary and
Bruteforce attacks, check out the following Wikipedia
articles (You don't have to read the entire article, just
read the first two paragraphs).
Dictionary_attack
force_attack
Got it? If yes, then let's use the app....
First, download and install WIBR+ on your android
device (download links are at the end of this article).
Open the app, you will see a screen as shown below.
Tap on " ADD NETWORK ", you will see the nearest WiFi
networks.
Select a WiFi network from the list, then you will see a
screen as shown below.
Now select the type of attack.
If you want to use the Bruteforce attack , select
" Bruteforce ", and then tap on " CONFIGURE
BRUTEFORCE".
Then configure the attack according to your needs.
For a normal attack, select the first four options
(lowercase, UPPERCASE, Numbers, and Specials) and
then save the configuration.
Now click on " ADD TO QUEUE", the WIBR+ will start
*****ing the password.
That normal attack I mentioned before is insane....
Yes.... because, the number of combinations is growing
exponentially with password length. That's why there
are options like Custom alphabet and Custom mask . If
you know that the password is something like admin
and two digits, you can set the mask to admin[x][x]
and select the digits alphabet. The app will try all
passwords like admin00, admin01 through admin99.
If you want to use the Dictionary attack , after selecting
a network, select dictionaries, if you don't want to use
the pre-installed dictionaries, you can use custom
dictionaries, all you have to do is, click on the " ADD
CUSTOM DICTIONARY" button and select your custom
dictionary file(s).
Note: Dictionary files are just text files containing a list
of passwords (one password per line).
You can get dictionary files from the following
Then select the imported dictionaries and then tap on
the " ADD TO QUEUE" button. The app will start
attacking the network...
The attacking process is very slow because of the way
android handles WiFi connection. According to the
developers, 8 passwords/minute is a good speed.
Tip: WIBR+ is a battery eater, so always carry a Power
Bank with you!
If this app is not working for you,
you are trying to ***** a network with
weak or unstable signal or in a very " noisy"
environment (i.e. many networks on
the same channel)
you are trying to access a network that
is using MAC filtering (only explicitly
allowed devices could access that
network).
you don't have enough patience .
That's all guys,
DOWNLOAD WIBR+ (ZIPPYSHARE)
www35.zippyshare.com/v/Cm839fG7/file.html
Like & Feedback Ka PHC!
SecurityTools
WIBR+ is an android app that is capable of *****ing
WiFi passwords. It was designed to test the security of
the WPA/WPA2 PSK WiFi networks, but now it is
widely being used to ***** weak WiFi passwords.
It supports two types of attacks -- Dictionary Attacks ,
and Bruteforce Attacks . And it supports custom
dictionaries!
If you don't know anything about Dictionary and
Bruteforce attacks, check out the following Wikipedia
articles (You don't have to read the entire article, just
read the first two paragraphs).
Dictionary_attack
force_attack
Got it? If yes, then let's use the app....
First, download and install WIBR+ on your android
device (download links are at the end of this article).
Open the app, you will see a screen as shown below.
Tap on " ADD NETWORK ", you will see the nearest WiFi
networks.
Select a WiFi network from the list, then you will see a
screen as shown below.
Now select the type of attack.
If you want to use the Bruteforce attack , select
" Bruteforce ", and then tap on " CONFIGURE
BRUTEFORCE".
Then configure the attack according to your needs.
For a normal attack, select the first four options
(lowercase, UPPERCASE, Numbers, and Specials) and
then save the configuration.
Now click on " ADD TO QUEUE", the WIBR+ will start
*****ing the password.
That normal attack I mentioned before is insane....
Yes.... because, the number of combinations is growing
exponentially with password length. That's why there
are options like Custom alphabet and Custom mask . If
you know that the password is something like admin
and two digits, you can set the mask to admin[x][x]
and select the digits alphabet. The app will try all
passwords like admin00, admin01 through admin99.
If you want to use the Dictionary attack , after selecting
a network, select dictionaries, if you don't want to use
the pre-installed dictionaries, you can use custom
dictionaries, all you have to do is, click on the " ADD
CUSTOM DICTIONARY" button and select your custom
dictionary file(s).
Note: Dictionary files are just text files containing a list
of passwords (one password per line).
You can get dictionary files from the following
Then select the imported dictionaries and then tap on
the " ADD TO QUEUE" button. The app will start
attacking the network...
The attacking process is very slow because of the way
android handles WiFi connection. According to the
developers, 8 passwords/minute is a good speed.
Tip: WIBR+ is a battery eater, so always carry a Power
Bank with you!
If this app is not working for you,
you are trying to ***** a network with
weak or unstable signal or in a very " noisy"
environment (i.e. many networks on
the same channel)
you are trying to access a network that
is using MAC filtering (only explicitly
allowed devices could access that
network).
you don't have enough patience .
That's all guys,
DOWNLOAD WIBR+ (ZIPPYSHARE)
www35.zippyshare.com/v/Cm839fG7/file.html
Like & Feedback Ka PHC!