May iba kong way ng pagunlock ng MF100 eh.
Download:
1.
You do not have permission to view the full content of this post.
Log in or register now.
2.
You do not have permission to view the full content of this post.
Log in or register now.
3.
You do not have permission to view the full content of this post.
Log in or register now.
4.
You do not have permission to view the full content of this post.
Log in or register now.
5.
You do not have permission to view the full content of this post.
Log in or register now.
Instructions:
1. extract all zip or rar files.
2.a. install QPST.exe.
2.b. install ZTEDrvSetup.exe. - skip if dongle not bricked/dead.
3. run "QPST Configuration">click "Add New Ports">uncheck "Show Serial and USB/QC Diagnostic ports only"> add all ports "COMX -USB/unknown" - X is a number.
4. click the added port and goto "Start Clients">EFS EXPLORER> then ok ok.
5. delete all files except folders in the EFS EXPLORER.
6. drag the files inside this folder. "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ ETS_EG_P671A1V1.0.0B06\3.Download_File\" and wait until finished. - from the files you extracted
7. run MF100UpdateToolV1.9.exe from "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ ". - from the files you extracted
8. in MF100UpdateToolV1.9.exe
uncheck "Special Item" and click "Software Version" look for "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ ETS_EG_P671A1V1.0.0B06\3.Download_File\" from the files you extracted.
9. click the "purple arrow" pointing to the right and wait until finished.[theres a time that it will search for the file ".sdi" just click close/cancel]
10. run DCCRAP, Select manufacturer "ZTE datacards",click "Detect Card" or the big magnifying glass, goto Flash and click "Write Dashboard" and use the GlobeVisibility.ISO you downloaded earlier - wait until finish.
11. enjoy your unlock SmartBro dongle.
12. go outside and buy halo-halo.
In any steps if you have trouble try close the finish program you use or reset/unplug and plug dongle.
Use any of this program or TUT at your own risk.
If you can't understand the TUT so sorry for you.
Tested in my Dead/no Autorun 16digit code MF100
credits:
ypjomz, TIMMY, kiLLi-kiLLerZ, ExcL
Follow mo lang mabuti yung instruction boss. Tested ko na yan sa MF100 ko eh. hehehe.