vsbfranz
Forum Veteran
- Joined
- Feb 23, 2019
- Posts
- 1,085
- Solutions
- 1
- Reaction
- 4,400
- Points
- 910
- Age
- 24
Tutorial By :- T.me/Owl_Master
- This tutorial will teach you how to ***** ANY password protected zip or rar file using a tool called f*****zip. It's easy to use and its very fast compared to other tools as its written in assembly.
- You need to use linux for this. I know lots of people try and use windows but if you are even a bit serious into häçking/*****ing you need to start using Linux - its easy to use and takes about 30 minutes to set up.
- Seriously. stop using windows. We have a linux help thread here on sinster and you can PM me if you need more help.
- Anyway here is the tutorial:
- 1) create a password protected zip file to practice on. Most distros you can just right click on a file and do 'create archive'. Make sure the password is all lowercase and 3 letters long for speed in testing.
- 2) type 'sudo apt-get install f*****zip' to get f*****zip.
- 3) navigate to the folder your zip is in (cd ...)
- 4) type f*****zip -b -l 3 -c a -u yourzipfilename.zip
- What this means is use f***** zip
- -b means use bruteforce (you can use a wordlist instead if you want)
- -l 3 means the length of the password (which is 3 in this case), you can specify range or use number but using a range takes a long time.
- -c a means use just lowercase, you can use a1 for letters and numbers etc.
- -u means that it will do a test unzip to make sure password was correct. If you dont select this it is a bit faster but you will get a few passwords to try/sometimes it will be wrong.
- 5) wait. It can take a long time, especially if you used a range.
- 6) PASSWORD FOUND!!!!: pw == xxx
- 7) profit.
- You can also Use John the Ripper.
- I hope this will help you.