Tutorial Tozed S12 Plus (UNISOC) OpenWrt Test Builds

[DogeX]

100% working add nalang support ng LTE Module and it's good to go.

 

[AGM]

View attachment 2121663
100% working add nalang support ng LTE Module and it's good to go.

May SQM QOS po ba ang zlt openwrt?

 

[DogeX]

May SQM QOS po ba ang zlt openwrt?

Sa build ni sir wala po SQM QoS. QoS over Nftables lang meron

 

[I am nobody]

Hello, wala nabang baguhin sa settings ng putty? Sakin kasi ayaw mag respond sa keyboard inputs.

Gusto ko sanang e flash using ttl

 

[bjarnco32]

Hello, wala nabang baguhin sa settings ng putty? Sakin kasi ayaw mag respond sa keyboard inputs.

Gusto ko sanang e flash using ttl

Depends on the kind of USB TTL that you're using. There's no issue with CP2102, but for some others you'll need to disconnect then reconnect the TX pin to gain console write access.

 

[I am nobody]

Depends on the kind of USB TTL that you're using. There's no issue with CP2102, but for some others you'll need to disconnect then reconnect the TX pin to gain console write access.

yan yung gamit ko lods cp2102, kahit anung press ko ng 1 at enter key, ayaw talaga. Lagi lang number 3 na default naka select

Tama ba na yung tatlo lang ang e connect? Rx Tx at Gnd?

Nakitita ko naman yung logs sa boot sa ttl kaya lang ayaw mag accept ng input sa keyboard.

Parang impossible ata mag flash sa
2: Load system code then write to Flash via TFTP.

Madali lang kasi yan ma access using Reset button at wps button.
Pero na try ko invalid image parati.

 

[DogeX]

yan yung gamit ko lods cp2102, kahit anung press ko ng 1 at enter key, ayaw talaga. Lagi lang number 3 na default naka select

Tama ba na yung tatlo lang ang e connect? Rx Tx at Gnd?

Nakitita ko naman yung logs sa boot sa ttl kaya lang ayaw mag accept ng input sa keyboard.

Parang impossible ata mag flash sa
2: Load system code then write to Flash via TFTP.

Madali lang kasi yan ma access using Reset button at wps button.
Pero na try ko invalid image parati.

Mali pag recover mo boss need mo muna load via TFTP yung OpenWRT build na initramfs tapos ssh ka sa modem then load mo yung dump via mtd Note: dapat via mtd (firmware partition) ang pag dump mo galing sa donor device.

 

[I am nobody]

Mali pag recover mo boss need mo muna load via TFTP yung OpenWRT build na initramfs tapos ssh ka sa modem then load mo yung dump via mtd Note: dapat via mtd (firmware partition) ang pag dump mo galing sa donor device.

Yun ang problema ko eh, ayaw mag respond sa keyboard input yung modem ko. Kaya yung option 2 lang pwede.

2: Load system code then write to Flash via TFTP.

Ma aaccess kasi yang option nayan using reset + wps button.

 

[sasame9821]

watch mode muna ako till meron ng upgrade for dummys version
since if ng upgrade ako ngayon using system upgrade sinsdabi upgrade version is incorrect or is corrupted
so ima watch this

 

[DogeX]

Yun ang problema ko eh, ayaw mag respond sa keyboard input yung modem ko. Kaya yung option 2 lang pwede.

2: Load system code then write to Flash via TFTP.

Ma aaccess kasi yang option nayan using reset + wps button.

May I know if Yung 10 Header pins ba na CP2102 or yung 4 Header pins yung nabili mo?

 

[I am nobody]

May I know if Yung 10 Header pins ba na CP2102 or yung 4 Header pins yung nabili mo?

yan lods, 6 pin

 

[DogeX]

Ahh, na solder mo ba sa board yung header pin.? Baka di ayos yung connection if di padin defective/sira yung USB to TTL.

 

[kaloyb]

support lods... more power and keep up the good work...
looking forward na mapagana na din pati LTE module...
sana magtulungan kayo ng BackSpare team para makapag produce ng webui update flash-able firmware file (libre lang mangarap, hehe...), thanks!

 

[rapain]

@bjarnco32 hi really appreciate your support for this s12pro modem,
any build updates at least somehow a working LTE?

 

[bjarnco32]

@bjarnco32 hi really appreciate your support for this s12pro modem,
any build updates at least somehow a working LTE?

Thank you. This build is offered AS IS, and there are currently no plans to any further releases.

However, the good news is that I managed to make the module work on this unit and is being offered as part of my CFW services.

 

[AGM]

Thank you. This build is offered AS IS, and there are currently no plans to any further releases.

However, the good news is that I managed to make the module work on this unit and is being offered as part of my CFW services.

Anong nangyari dun sa R281 OpenWRT? Naka lock yung thread.

 

[bjarnco32]

Anong nangyari dun sa R281 OpenWRT? Naka lock yung thread.

A moderator closed the thread, probably because of the spam (abuse?) of hidden messages generated in the thread that serve no one except the parties involved. Not to mention, it is quite disrespectful to the thread starter to conduct conversations in such way in the thread that should have been best done privately, if the intention is to send a message only for the eyes of the recipient.

 

[speedforcelk]

How can i directly flashed via sysupgrade ?

How can find telnet login credentials ?

 

[bjarnco32]

How can i directly flashed via sysupgrade ?

View attachment 2604436
How can find telnet login credentials ?

You can try searching around here and the rest of the net (use "openwrt zlt s12 pro") for that info.

 

[yesitha]

Mali pag recover mo boss need mo muna load via TFTP yung OpenWRT build na initramfs tapos ssh ka sa modem then load mo yung dump via mtd Note: dapat via mtd (firmware partition) ang pag dump mo galing sa donor device.

need support sir my device only blinking yellow light

How can i directly flashed via sysupgrade ?

View attachment 2604436
How can find telnet login credentials ?

unlock with session id