What's new

Tutorial SPEED UP YOUR INTERNET,NO SOFTWARE NEEDED

J

Jeanh

cREDIT TO: mISTERaNGRYfACE


NOTE: THIS IS NOT A TRICK OR ANYTHING, THIS ARE TWEAKS SO THIS IS WORKING AND NEVER EXPIRE.

DO AT YOUR OWN RISK




PLEASE STRICTLY FOLLOW THE STEPS, ALL STEPS ARE CLEAR, I AM NOT RESPONSIBLE ON ANYTHING THAT WILL HAPPEN TO YOUR COMPUTER DUE TO YOUR MISTAKE


REGISTRY TWEAK


1. Windows XP (x64 and x86) and Windows 7 (same steps)

Go to Start > Run > type in REGEDIT (capitalization not important) > then go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters > right click anywhere in the left side of the window then select NEW DWORD (it is very important that you choose dword, even you are x64 user), then input the dword name, after the new registry entry is made, double click it and input the dword value....


dword name- SackOpts dword value- 00000001

dword name- TcpWindowSize dword value- 0005ae4c

dword name- Tcp1323Opts dword value- 00000003

dword name- DefaultTTL dword value- 00000040

dword name- EnablePMTUBHDetect dword value- 00000000

dword name- EnablePMTUDiscovery dword value- 00000001

dword name- GlobalMaxTcpWindowSize dword value- 0005ae4c


29ypjqg.jpg

qoj229.jpg





2. Go to Start > Run > type in REGEDIT (capitalization not important) > then go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\ServiceProvider > edit the registry entries as follows:

DnsPriority - 00000001

HostsPriority - 00000001

LocalPriority - 00000001

NetbtPriority - 00000001

all values must be changed to 1 on decimal and 00000001 on hexadecimal.


TWEAK ON DEVICE MANAGER


NOTE: this works on desktop, if you are using a laptop, go to your network adapter on your device manager then configure your network adapter to highest possible settings.

Go to desktop > My computer-(right click on) >properties > then go HARDWARE tab > Device manager > Now you see a window of Device manager > then go to Ports > Communication Port(double click on it and Open).

After open u can see a Communication Port properties.

Go the Port Setting > and now increase your "Bits per second" to 128000 and "Flow control" change to Hardware > click Apply and see the results.


2s8ib9y.jpg

NOTE: no pic for windows 7 because i am using a laptop but it is also the same for windows 7 so don't worry.



GPEDIT.MSC TWEAK


NOTE: there are no gpedit.msc service on windows home editions and starter editions.


WINDOWS XP


TWEAK #1

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > QOS PACKET SCHEDULER > double click LIMIT RESERVABLE BANDWIDTH (view the image provided), it will say it is not configured, but the truth is under the 'Explain' tab
3. click enable then set the value of bandwidth to "0" ZERO.

2d9ac9h.jpg

TWEAK #2

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > QOS PACKET SCHEDULER > background intelligent transfer service > double click MAXIMUM NETWORK BANDWIDTH THAT BITS USES (BITS - Binary Intelligent Transfer Service, BITS uses HTTP. BITS downloads files using the standard Hypertext Transfer Protocol (HTTP) and requires Internet Information Server (IIS) to be running on the server that serves the files. HTTP packets pass more easily through firewalls, which makes BITS a good choice for getting files from the Internet.)
3. copy the settings from my screenshot.

2jb2t5k.jpg


WINDOWS 7

TWEAK #1

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > QOS PACKET SCHEDULER > double click LIMIT RESERVABLE BANDWIDTH (view the image provided)
3. click enable then set the value of bandwidth to "0" ZERO.

uyjcn.jpg

TWEAK #2

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > Background Intelligent Transfer Service > (view the image provided)
3. copy the settings from my screenshot.

25hkcif.jpg


iLoonie
before kayo mag apply ng any steps dito, dapat may backup kayo sa registry ninyo. pwede kayo gumamit ng CCleaner pang backup or yung gumawa nalang ng System Restore point para ma reverse pa ang damage if ever may mali kayong nagawa. like ts said, you'll be the one responsible for your own mistakes.

13153523_1106774132678828_1932984573_n.png
 

Attachments

Last edited by a moderator:

iLoonie

Forum Veteran
before kayo mag apply ng any steps dito, dapat may backup kayo sa registry ninyo. pwede kayo gumamit ng CCleaner pang backup or yung gumawa nalang ng System Restore point para ma reverse pa ang damage if ever may mali kayong nagawa. like ts said, you'll be the one responsible for your own mistakes.
 
cREDIT TO: mISTERaNGRYfACE


NOTE: THIS IS NOT A TRICK OR ANYTHING, THIS ARE TWEAKS SO THIS IS WORKING AND NEVER EXPIRE"



PLEASE STRICTLY FOLLOW THE STEPS, ALL STEPS ARE CLEAR, I AM NOT RESPONSIBLE ON ANYTHING THAT WILL HAPPEN TO YOUR COMPUTER DUE TO YOUR MISTAKE


REGISTRY TWEAK


1. Windows XP (x64 and x86) and Windows 7 (same steps)

Go to Start > Run > type in REGEDIT (capitalization not important) > then go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters > right click anywhere in the left side of the window then select NEW DWORD (it is very important that you choose dword, even you are x64 user), then input the dword name, after the new registry entry is made, double click it and input the dword value....


dword name- SackOpts dword value- 00000001

dword name- TcpWindowSize dword value- 0005ae4c

dword name- Tcp1323Opts dword value- 00000003

dword name- DefaultTTL dword value- 00000040

dword name- EnablePMTUBHDetect dword value- 00000000

dword name- EnablePMTUDiscovery dword value- 00000001

dword name- GlobalMaxTcpWindowSize dword value- 0005ae4c


29ypjqg.jpg

qoj229.jpg





2. Go to Start > Run > type in REGEDIT (capitalization not important) > then go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\ServiceProvider > edit the registry entries as follows:

DnsPriority - 00000001

HostsPriority - 00000001

LocalPriority - 00000001

NetbtPriority - 00000001

all values must be changed to 1 on decimal and 00000001 on hexadecimal.


TWEAK ON DEVICE MANAGER


NOTE: this works on desktop, if you are using a laptop, go to your network adapter on your device manager then configure your network adapter to highest possible settings.

Go to desktop > My computer-(right click on) >properties > then go HARDWARE tab > Device manager > Now you see a window of Device manager > then go to Ports > Communication Port(double click on it and Open).

After open u can see a Communication Port properties.

Go the Port Setting > and now increase your "Bits per second" to 128000 and "Flow control" change to Hardware > click Apply and see the results.


2s8ib9y.jpg

NOTE: no pic for windows 7 because i am using a laptop but it is also the same for windows 7 so don't worry.



GPEDIT.MSC TWEAK


NOTE: there are no gpedit.msc service on windows home editions and starter editions.


WINDOWS XP


TWEAK #1

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > QOS PACKET SCHEDULER > double click LIMIT RESERVABLE BANDWIDTH (view the image provided), it will say it is not configured, but the truth is under the 'Explain' tab
3. click enable then set the value of bandwidth to "0" ZERO.

2d9ac9h.jpg

TWEAK #2

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > QOS PACKET SCHEDULER > background intelligent transfer service > double click MAXIMUM NETWORK BANDWIDTH THAT BITS USES (BITS - Binary Intelligent Transfer Service, BITS uses HTTP. BITS downloads files using the standard Hypertext Transfer Protocol (HTTP) and requires Internet Information Server (IIS) to be running on the server that serves the files. HTTP packets pass more easily through firewalls, which makes BITS a good choice for getting files from the Internet.)
3. copy the settings from my screenshot.

2jb2t5k.jpg


WINDOWS 7

TWEAK #1

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > QOS PACKET SCHEDULER > double click LIMIT RESERVABLE BANDWIDTH (view the image provided)
3. click enable then set the value of bandwidth to "0" ZERO.

uyjcn.jpg

TWEAK #2

1. click START > RUN > then type gpedit.msc
2. go to local computer policy > administrative templates > network > Background Intelligent Transfer Service > (view the image provided)
3. copy the settings from my screenshot.

25hkcif.jpg



13153523_1106774132678828_1932984573_n.png
Wala bang for windows 8?
 

Attachments

New Topics

Online statistics

Members online
2,109
Guests online
1,865
Total visitors
3,974

Forum statistics

Threads
1,200,063
Posts
21,235,204
Members
1,596,080
Attachments
1,685,765
Profile posts
99,787
Top