What's new

Solar panel

nodark

Leecher
Joined
Apr 21, 2023
Posts
3
Reaction
0
Points
2
Hello, newbie here.

Ask ko lang po, bumili po kasi ako sa shoppee ng solar panel set na po.
50w solar panel+10A controller+12v-40Ah battery+1000w inverter.
Naka set up na po base sa guide sa shoppee, gumagana na po, Ang problema ko lang, mabilis maubos yung karga ng battery.
May 2 Led light, 2 clip fan, tapos charge lang po ng cp, may TV rin po, (pero di na po binubuksan gawa ng naubos agad karga ng battery).
Yung 2 led light every 7pm-10pm lang naka bukas kasi pinapatay na pag tulog, yung 2 clip fan bukas parehas sa Umaga, tapos isa bukas sa Gabi.
Balak ko po sanang gawing dalawa yung solar.
Ano pong advice nyo?
Pwede ko po ba dagdagan ng 50w solar panel?
Pag pwede po, series po ba pagkabit o parallel?
TIA
 
Try mo dagdagan ng isa pang 50w solar panel para ma full charge ang battery at magamit ng 40 Amp Hour, pero kung na full charge naman ng single 50w solar panel mo ang battery, meaning kailangan mo pa ng isa pang battery para tumagal ang paggamit ng kuryente

Series Connection Explained

The disadvantage with series wiring is that all panels are all basically dependent on each other – if one panel is shaded, the whole string will be less efficient or sometimes not generate any power at all.

Connecting your panels in parallel will increase the amps and keep the voltage the same. This is often used in 12V systems with multiple panels as wiring 12V panels in parallel allows you to keep your charging capabilities 12V.
 
Last edited:
Try mo dagdagan ng isa pang 50w solar panel para ma full charge ang battery at magamit ng 40 Amp Hour, pero kung na full charge naman ng single 50w solar panel mo ang battery, meaning kailangan mo pa ng isa pang battery para tumagal ang paggamit ng kuryente

Series Connection Explained

The disadvantage with series wiring is that all panels are all basically dependent on each other – if one panel is shaded, the whole string will be less efficient or sometimes not generate any power at all.

Connecting your panels in parallel will increase the amps and keep the voltage the same. This is often used in 12V systems with multiple panels as wiring 12V panels in parallel allows you to keep your charging capabilities 12V.
Hello, ask ko lang po, if kaya ng controller ko yung 2 50W solar panel?
Thank you po ulit ♥️
 

Similar threads

Back
Top