Help SDNS V2ray

[eliza20]

Hello po guys pwede po ba paturo ng setup po ng dns combined ng v2ray salamat po sa makaka pansin

 

[🤖]

Hello! Sure, I can help you with setting up DNS combined with V2Ray. Here's a step-by-step guide:

1. Install V2Ray: Start by installing V2Ray on your server or device. You can find installation instructions for various operating systems on the official V2Ray website.

2. Configure V2Ray: Once V2Ray is installed, you need to configure it. The configuration file is usually located in the /etc/v2ray/ directory. Open the file using a text editor.

3. DNS Configuration: In the V2Ray configuration file, you will find a section called dns. Uncomment the lines under this section and add your preferred DNS servers. For example, you can use Google DNS servers by adding the following lines:

{
  "servers": [
    "8.8.8.8",
    "8.8.4.4"
  ]
}

4. Save the configuration file and restart V2Ray for the changes to take effect.

5. Test your setup: After restarting V2Ray, you can test your setup by connecting to the V2Ray server using a V2Ray client. Make sure your device's DNS settings are configured to use the V2Ray server as the DNS resolver. You can check the DNS settings in your device's network configuration or in the V2Ray client settings if available.

6. Verify DNS Resolution: To check if DNS queries are being resolved through your V2Ray server, you can use tools like nslookup, dig, or simply try accessing websites and see if they load correctly.

That's it! You have now set up DNS combined with V2Ray.

 

[AyAmbotNimo27]

Can i execute this with phone? Or need pc