forceedge11
Addict
- Joined
- Jul 12, 2014
- Posts
- 10
- Reaction
- 2
- Points
- 64
Hi guys! So, may isshare lang ako kung paano i-disable ang AP Isolation ng AN5506-04-FA. AP Isolation, if enabled, means hindi magkakakitaan sa network ang mga connected devices like PCs, laptops, phones, etc.
Eto na po tut:
Dapat may telnet client po naka install sa pc nyo.
Note: Pagkakaintindi ko sa article na to, pag nag-restart ka ng modem or in-off mo, babalik sa dati then gawin nanaman yung process. Sakin kasi hindi nag-revert eh.
Eto na po tut:
Dapat may telnet client po naka install sa pc nyo.
- First you have to enable the Telnet interface on your PLDT box.
Go to You do not have permission to view the full content of this post. Log in or register now. (bookmark it) and log in with the following details:
Administrator: f~i!b@e#r$h%o^m*esuperadmin (make sure the screen prompt says ‘Administrator’ NOT ‘Username’)
Password: s(f)u_h+g|u
For older firmware versions, a different superadmin username and password may apply - Once logged in, select ‘Debug Switch’ on the sidebar menu
- Enable the Telnet switch and click Apply
- Log out
- Open a terminal window or command prompt
- telnet 192.168.1.1 and use gpon as the login and as the password
- When it says ‘User’, type enable and press Enter, then enter gpon again as the password
- Type cd switch and press Enter
- Type control port_fw_eligiblity_switch disable and press Enter (no that’s not a typo in the word eligiblity!)
- Done. Close the command prompt window.
Note: Pagkakaintindi ko sa article na to, pag nag-restart ka ng modem or in-off mo, babalik sa dati then gawin nanaman yung process. Sakin kasi hindi nag-revert eh.