PLDT Boosteven R281 (Band Locking)

[Xpmove12]

SSH ka mag bandlock

Medyo madugo gagawin, Lods. Kac need pa nila enabled telnet at ssh kelangan din nila matuto sa termux yung dropbear,
Inde kac working yung nginx gawa master Lenar na may shortcut sa enabled telnet,

Kelangan ng Firmware V4 baseband2, para magawan custumized nginx na malagyan shortcut enabled telnet para maoabilis lahat ,hehe

 

[H4wk3ye]

Medyo madugo gagawin, Lods. Kac need pa nila enabled telnet at ssh kelangan din nila matuto sa termux yung dropbear,
Inde kac working yung nginx gawa master Lenar na may shortcut sa enabled telnet,

Kelangan ng Firmware V4 baseband2, para magawan custumized nginx na malagyan shortcut enabled telnet para maoabilis lahat ,hehe

Sa 192.168.8.1

 

[Xpmove12]

Sa 192.168.8.1

Kelangan Bridge enabled, Lods para gumana 192.168.8.1, saka auto updates bagsak kung naka bridge enabled. May gumawa bandlocking jan nayari agad sa updates. Firmware V4.1 baseband21,

Need muna gawin block auto updates jan sa 192.168.8.1 kung gagamitin, mas safe mag bandlocking sa ssh sa 192.168.1.1, inde nag auto updates yung kina Edward at Ghost. Hinayaan lang nila naka disabked Bridge mode. Bale ang ginawa nila binuksan Nila Telnet at Ssh sa 192.168.1.1, ayun naka safe sila, Lods. Inde pa rin nag updates, ginamit nila Config Master Jerome at Jhowel.

 

[H4wk3ye]

Kelangan Bridge enabled, Lods para gumana 192.168.8.1, saka auto updates bagsak kung naka bridge enabled. May gumawa bandlocking jan nayari agad sa updates. Firmware V4.1 baseband21,

Need muna gawin block auto updates jan sa 192.168.8.1 kung gagamitin, mas safe mag bandlocking sa ssh sa 192.168.1.1, inde nag auto updates yung kina Edward at Ghost. Hinayaan lang nila naka disabked Bridge mode. Bale ang ginawa nila binuksan Nila Telnet at Ssh sa 192.168.1.1, ayun naka safe sila, Lods. Inde pa rin nag updates, ginamit nila Config Master Jerome at Jhowel.

Bukas yata kailangan nilang tignan.

 

[Xpmove12]

Bukas yata kailangan nilang tignan.

Parang Ganito Ginawa nila sa D2K, tinago yung mga asp links

Fixed sa ginawa nila sa Evoluzn Fx Id3 V1.1.1
You do not have permission to view the full content of this post. Log in or register now.

Tapos fixed sa 1.1.1.21

You do not have permission to view the full content of this post. Log in or register now.

Credit from Master Jerome/Jhowel

 

[Xpmove12]

Bukas yata kailangan nilang tignan.

Naka closed, Lods. Medyo nagpatulong kac si Edward nun. Imiwas sa bridge mode enabled, factory reset sya nun para auto disabled yung bridge sa kanya. Nasa 192.168.1.1 pa rin yung command na mag execute ng bridge enabled, iniba lang nila links and commands. Hehe

 

[wigwig]

Nagawa ko lods tru termux, ang kaso ngHahang kpg inaAacces ko ang router.localhost:8080,,, ano kaya ang problema kpg gnun mga lods,,

Medyo madugo gagawin, Lods. Kac need pa nila enabled telnet at ssh kelangan din nila matuto sa termux yung dropbear,
Inde kac working yung nginx gawa master Lenar na may shortcut sa enabled telnet,

Kelangan ng Firmware V4 baseband2, para magawan custumized nginx na malagyan shortcut enabled telnet para maoabilis lahat

 

[_ameee]

4.0 ba yan? sundin mo nalang tutorial ni sir jhowel sa y0vtube para sure no update. Use huaterminal tapos kapag magbabandlocking

Nagawa ko lods tru termux, ang kaso ngHahang kpg inaAacces ko ang router.localhost:8080,,, ano kaya ang problema kpg gnun mga lods,,

 

[Xpmove12]

Nagawa ko lods tru termux, ang kaso ngHahang kpg inaAacces ko ang router.localhost:8080,,, ano kaya ang problema kpg gnun mga lods,,

Ano nagha hang yung cp or yung R281 mo, wag ka na kac mag Termux, Lods, na enabled mo na Telnet at ssh
Mag bandlocking ka na sa via ssh sa smartphone or putty sa pc windows

Bandlocking via SSH or Putty using
Ubus command

Eto yung mga Band LODS

Band 3/1 using Ubus
ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,5,0"}'

band 28/3/1 yan
ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,8000005,0"}'

band 40/1
ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,8000000001,0"}'




Bandlocking using nginx/Huawei Terminal

band 28/3/1 yan
AT+ZNLOCKBAND=1,0,8000005,0

Band 41/40/1
AT+ZNLOCKBAND=1,0,18000000001,0

band 40/1?
AT+ZNLOCKBAND=1,0,8000000001,0


Band 3/28
AT+ZNLOCKBAND=1,0,8000004,0

Band 1/3/28
AT+ZNLOCKBAND=1,0,8000005,0

 

[Xpmove12]

4.0 ba yan? sundin mo nalang tutorial ni sir jhowel sa y0vtube para sure no update. Use huaterminal tapos kapag magbabandlocking

Lods, danger sa Huawei Terminal, kac bubuksan mo yung 192.168.8.1 via bridge mode, ang bagsak auto updates, hehe. May nagpatulong sa akin ganyan bandlock via huawei Terminal, gumana naman kaso nag auto updates. Sinabihan ko kac na pagkatapos enabled yung Bridge mode, disabled din agad, pagkatapos mag bandlock, inde tumalab yung blocking updates ni Sir Jerome sa 192.168.1.1 kung naka bridge Enabled magbubukas 192.168.8.1, equals auto updates. Inde na disabled agad bridge mode, ayun nag updates Na sa Firmware V4.2 baseband 2.2, previous firmware nya V41 baseband 2.1, hehe

 

[Xpmove12]

Meron din nagpatulong na, Firmware V4.2 pero Baseband 2.1, yun ang. másáráp I downgrade pero takot syang galawin R281 nya

 

[pspx010]

hindi. still waiting sa .8.1 na reflashing from mga masters natin

Cge po hintay hintay nlng din muna ako.salamat.

 

[randomthinker123]

Meron din nagpatulong na, Firmware V4.2 pero Baseband 2.1, yun ang. másáráp I downgrade pero takot syang galawin R281 nya

boss meron po akong r281 firmware version 4.1 tapos baseband 2.1.. pwede po ba ito idowngrade sa version na pwede maopenline?

 

[H4wk3ye]

boss meron po akong r281 firmware version 4.1 tapos baseband 2.1.. pwede po ba ito idowngrade sa version na pwede maopenline?

Pwede naman ma openline yan kahit dimo na i downgrade.

 

[Xpmove12]

Pwede naman ma openline yan kahit dimo na i downgrade.

Gawa ka custom Firmware V4.1 baseband 2.1, Lods. Yung permanent unlock na din.

Pa shared mo Pala nginx mo pang r051, Bro

 

[Xpmove12]

boss meron po akong r281 firmware version 4.1 tapos baseband 2.1.. pwede po ba ito idowngrade sa version na pwede maopenline?

Baka gusto nya permanent unlock, unli reset, Bro. Yung Firnware V4.0 baseband 20, pwede nga yan I downgrade, Bro sa Firmware V4.1 to V4.0, yung baseband pwede rin

Yung MTD7(na firmware 2)ng 192.168.1.1 pwede pang downgrade V4.1 to v4.0

Saka dunsa 192.168.8.1, pwede rin I downgrade baseband 2.1 to 2.0 gamit yung mtd7(firmware2)

Goodluck mag backread nalang kau page 22 to 40, para masundan pagbukas Telnet at Ssh

 

[antotitot]

Baka gusto nya permanent unlock, unli reset, Bro. Yung Firnware V4.0 baseband 20, pwede nga yan I downgrade, Bro sa Firmware V4.1 to V4.0, yung baseband pwede rin

Yung MTD7(na firmware 2)ng 192.168.1.1 pwede pang downgrade V4.1 to v4.0

Saka dunsa 192.168.8.1, pwede rin I downgrade baseband 2.1 to 2.0 gamit yung mtd7(firmware2)

Goodluck mag backread nalang kau page 22 to 40, para masundan pagbukas Telnet at Ssh

V4.2 baseband 2.2 pwdi kaya?

 

[Xpmove12]

V4.2 baseband 2.2 pwdi kaya?

Inde, bro hehe. Yung baseband 22 problema ayaw ma downgrade, yung firmware lang v42 to v41, yunlang pwede, no unlock pa rin

Wait natin updates master jerome

 

[wigwig]

Mga lods kelangan ba Enabled muna ung Telnet before mgBandlocking,?
Tapos kelangan ba iDisabled ung Tr069?
salamat mga lods

 

[Xpmove12]

Mga lods kelangan ba Enabled muna ung Telnet before mgBandlocking,?
Tapos kelangan ba iDisabled ung Tr069?
salamat mga lods

Kahit inde na Lods, Ano version ng firmare mo, enabled mo lang kung gusto mo enabled din Ssh at magbandlocking Via SSH using UBUS Command sa Smartphone SSH, Putty naman sa Windows Pc/Laptop

Kung idi disabled mo naman auto updates yang TR069