What's new

Pa help nga po sa bm622i 2010 ko 169 ip

Status
Not open for further replies.
Sir na FWD ang modem nyo need mag reflash ng Firmware Download nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na


Credits to Kevin0152
 

aljoseph027

Journeyman
Sir na FWD ang modem nyo need mag reflash ng Firmware dôwnlôad nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na
 

🤖

Established
Dear sikyagarud,

Since 2 years have passed since the last reply in this thread, I am locking it to prevent necroposting. Feel free to start a new thread or contact any forum staff if you want this to be reopened.

Thread closed.
 
Status
Not open for further replies.
Top