Closed HUAWEI B315S-936 UNLOCKING AND ADMIN ACCESS

[nae8ean]

nahihirapan akong unlock yung 5Ghz mode sa wifi mode 2.4ghz lang ayaw mag mag pili still beta testing bago ko ma unlock lahat ng hidden feature nito halos na unlock ko na lahat ng feature yun na lang problem ko at nag add ako ng sntp ng pagasa

 

[XanderShaneFreah]

nice thanks po

 

[horasio]

HUAWEI B315S-936 UNLOCKING

Unlocking Instructions:
Step 1: Enter USB Mode (Steady Green Color)

a. Connect LAN cable from the LAN port of your modem to your PC and turn it on.

b. Run Multicast Upgrade Tool as administrator.

c. Make sure that your LAN card is properly chosen under “Network Card” option.

d. Under “File Path” option click “Open” and browse for the 931.bin file. Do not click “Start” at this point.

e. Unplug your modem.

f. Click “Start” in your Multicast Upgrade Tool.

g. Plug your modem and wait until the signal mode indicator displays a steady red color.

h. Press and hold “WPS” and “Power” buttons on your modem simultaneously until the signal mode indicator’s red color turns off twice, wait about 10 seconds then release the buttons.

i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.

j. Install Mobile Partner on your PC to provide the necessary USB drivers for your modem. If your operating system is windows 8 or above, install the “Huawei Drivers” provided.

k. Connect your modem to your PC via USB cable.

l. Take note of the COM port (Huawei UI interface) under LPT/COM ports in device manager.

Just one question, after the light indicator becomes red at letter g instruction, are we going to stop our MULTICAST TOol or this multicast tool will continue until the procces end? because if you look at the instruction it said on letter h that we are going to press the WPS and POWER simultaneously after the red color display and no instruction that we are going to stop the multicast tool. Hope somebody will answer my question. thank you in advance.


Wooooohhh sweaty and nose bleed.

 

[nae8ean]

HUAWEI B315S-936 UNLOCKING

Unlocking Instructions:
Step 1: Enter USB Mode (Steady Green Color)

a. Connect LAN cable from the LAN port of your modem to your PC and turn it on.

b. Run Multicast Upgrade Tool as administrator.

c. Make sure that your LAN card is properly chosen under “Network Card” option.

d. Under “File Path” option click “Open” and browse for the 931.bin file. Do not click “Start” at this point.

e. Unplug your modem.

f. Click “Start” in your Multicast Upgrade Tool.

g. Plug your modem and wait until the signal mode indicator displays a steady red color.

h. Press and hold “WPS” and “Power” buttons on your modem simultaneously until the signal mode indicator’s red color turns off twice, wait about 10 seconds then release the buttons.

i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.

j. Install Mobile Partner on your PC to provide the necessary USB drivers for your modem. If your operating system is windows 8 or above, install the “Huawei Drivers” provided.

k. Connect your modem to your PC via USB cable.

l. Take note of the COM port (Huawei UI interface) under LPT/COM ports in device manager.

Just one question, after the light indicator becomes red at letter g instruction, are we going to stop our MULTICAST TOol or this multicast tool will continue until the procces end? because if you look at the instruction it said on letter h that we are going to press the WPS and POWER simultaneously after the red color display and no instruction that we are going to stop the multicast tool. Hope somebody will answer my question. thank you in advance.


Wooooohhh sweaty and nose bleed.

sa binigay mong step andun ang sagot sa letter i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.

 

[horasio]

sa binigay mong step andun ang sagot sa letter i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.

onga haha ngayon ko lang napansin hehe

 

[BLoodyLungz]

backup. nahirapan ako mag openline.

 

[horasio]

backup. nahirapan ako mag openline.

mas madali yung pag open line ni sir jansen ramos, yun nalng ginamit ko no need na mag USB mode pag na debrand mo na

 

[nae8ean]

mas madali yung pag open line ni sir jansen ramos, yun nalng ginamit ko no need na mag USB mode pag na debrand mo na

tama ka dyan hehehe lalo na if upgraded yung firmware nila pag kaalam ko if version 21.313... and up ibang method ang pag usb mode hindi power+wps kung hindi power+reset pero minsan may mga firmware ayaw talaga mag pa usb mode kaya mas recomended ko yung kay jansen

 

[Ajpgwapo]

Salamat master

 

[Ajpgwapo]

Sana meron

Yan daw po ned na bin para sa full admin ng 936...di ko alam panu yan iflash sana may makagawa dto at ishare para sa phc.

 

[celjem]

thanks

 

[BLoodyLungz]

mas madali yung pag open line ni sir jansen ramos, yun nalng ginamit ko no need na mag USB mode pag na debrand mo na

kahit old 936 modem?

 

[horasio]

kahit old 936 modem?

yes sir tested na

 

[nheiljazz10]

Working ba ito

 

[horasio]

Working ba ito

wroking na working

 

[BLoodyLungz]

thanks po dito. ito din po try niyo mas mabilis https://phcorner.net/t/openline-and-full-admin-tut-for-globe-936.288188/page-10#post-4659589

 

[RojeJimenez]

Thank you guys.p

 

[RojeJimenez]

guys kailangan p bang mag download ng Huawei Driver.?

 

[BLoodyLungz]

guys kailangan p bang mag download ng Huawei Driver.?

para sakin oo.

 

[horasio]

kaya kaya nito yung stock firmware ng globe tapos, bigla nalang nag redtide. kaya kaya i fix nito yun?