What's new

Closed How to openline b315s-936 old and new blue label

Status
Not open for further replies.

shadow1979

Addict
Joined
Apr 16, 2016
Posts
87
Reaction
126
Points
105
Permission to post po dito sir Draft
Thank's in advance

This Tutorial is Modified Version by me on how to openline B315s-22 in easy way at sa mga bigo paring mag USB Mode at Mag Telnet at wala ng POWER + WPS para mapasok ang usb mode.. sakit ulo nyo kasi na hulog kayo sa bitag ni kamatayan Kaya ito Patok na Patok sa Pang Lasa Nyo..



1st download all we need

1. You do not have permission to view the full content of this post. Log in or register now.
2. You do not have permission to view the full content of this post. Log in or register now.
3. You do not have permission to view the full content of this post. Log in or register now.
4. You do not have permission to view the full content of this post. Log in or register now.
5. You do not have permission to view the full content of this post. Log in or register now.
6. You do not have permission to view the full content of this post. Log in or register now.



USB MODE STEP

Step 1.
Unplug power ka muna at wag mong ibalik hangat hinde ko sinasabi at kahit hindi na nakakabit ang LAN cable ok lang

Step 2.
plug USB male to male

Step 3.
Kumuha ng pang short kahit piso pwede na temporary short lang naman kasi sa iba need pang e kabit ang jumper ng matagalan ito hinde na, temporary lang.

Step 4.
Pag nagawa muna lahat ang 3 step's ilagay mo ang pang short at plug ang powor pag hinde nag light at may indicator ng tunog ng usb success yun at bitawan ang temporary jumper.

Note:
"IF" nag light at walang indicator sound ng USB ibig sabihin hinde maayos ang pag short nyo ulitin nyo ulit..


JUMPER

http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209622


Step 5.
I open ang HUAWEI_Driver_5.05.02.00 na download nyo at install hintayin nyo lang ng konte kasi silent installer yan. pag ok na.

Step 6.
I open si Balong_USB_Downloader_1.0.1.10 then fallow steps sa picture.

1.png
2.png
3.png
4.png
5.png

Step 7.
Open nyo yung Flash Files by: fr3nsis v1.0.0.0 at gayahin ang picture sa baba

http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209700&d=1500012565
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209701&d=1500012582
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209702&d=1500012645
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209703&d=1500012716
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209704&d=1500035501

Note:
dapat piliin nyo yung port ng 3G PC UI Interface tulad sakin nasa port (COM4) sya yun ang ilalagay nyo if wala yung port pwede ninyong e manual type kasi editable naman yung port box. then tuloy-tuloy na tayo

10.png

Note:
Hintayin nyo lang matapos na may lalabas na "Remove Battery" pag yan ang lumabas wag nyo tangalin ang power cord at yung usb cord hayaan mo lang at kusang may tutunog na sound indicator ng USB if may narinig kayong indikasyon ng USB.


Step 8
I open si cid-reader by: Dawood1208 at click nyo SCAN ports then dapat yung port naka lagay sa port ay yun paring port ng 3G PC UI Interface tulad sakin nasa port (COM4) if di kayo sure yun ang lalabas tingnan nyo sa device manager. if yun na ang tama e click ang Read IMEI then hintayin pag lumabas ng IMEI No. nyo Click nyo yung Read CID then hintayin if may lumabas then copy and paste ang code sa baba pa isa-isa lang at e click ang send at hintayin ang respond ng code na may lumabas na "OK" then tuloy-toluy na kayo sa iba pang code.. pag OK na po ang lumabas Insert nyo na ang SMART SIM at e close na lahat ng running apps nyo at mga USB at Power at i plug ang LAN Cable at Power.. Ayan may Openline B315s-936 na kayo..

lY9vQaV.png

13.png
14.png
15.png

NOTE:
Pag nag error or na close ang application ni reader open nyo lang ulit at e continue ang pag lagay ng code..

CODES:

1. copy and paste then send----->>> at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

2. copy and paste then send----->>> AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,,

3. copy and paste then send----->>> AT ^ SYSCFGEX = "0302", 400000,1,2,800C5 ,,

Your Done


THEN OPEN 192.168.8.1

Username: admin
Password: admin

Note:
Pag ang GUI ay iba na language sundan lang ang pic sa baba..

16.png
17.png
18.png
1.png

GOOD LUCK GUYS SANA NAKA TULONG AKO SA INYO..

FORGET to HIT THANKS at wag namang HIT and RUN...FEEDBACK naman

Please support us by liking our Facebook Page and inviting your friends to do the same. Thank you. :)
Made with <3 by You do not have permission to view the full content of this post. Log in or register now. / shadowtech1987
 

Attachments

Last edited:
Sir good morning po. Sumunod naman po ako sir sa instructions pero pag inoopen ko po yung flasher at iflash ko na po yung hmf file lagi nalang po nagsstuck sa "checking downloading mode" ano po kayang problem? Thank you po
 
Sir yung lumalabas lang po sa ports ay yung 3G PC UI INTERFACE at wala po lumalabas sakin na 3G APPLICATION INTERFACE. nakaka apekto po ba yun sir?
 
Permission to post po dito sir Draft
Thank's in advance

This Tutorial is Modified Version by me on how to openline B315s-22 in easy way at sa mga bigo paring mag USB Mode at Mag Telnet at wala ng POWER + WPS para mapasok ang usb mode.. sakit ulo nyo kasi na hulog kayo sa bitag ni kamatayan Kaya ito Patok na Patok sa Pang Lasa Nyo..


1st download all we need

  1. You do not have permission to view the full content of this post. Log in or register now.
  2. You do not have permission to view the full content of this post. Log in or register now.
  3. You do not have permission to view the full content of this post. Log in or register now.
  4. You do not have permission to view the full content of this post. Log in or register now.
  5. You do not have permission to view the full content of this post. Log in or register now.
  6. You do not have permission to view the full content of this post. Log in or register now.


USB MODE STEP

Step 1.

Unplug power ka muna at wag mong ibalik hangat hinde ko sinasabi at kahit hindi na nakakabit ang LAN cable ok lang

Step 2.
plug USB male to male

Step 3.
Kumuha ng pang short kahit piso pwede na temporary short lang naman kasi sa iba need pang e kabit ang jumper ng matagalan ito hinde na, temporary lang.

Step 4.
Pag nagawa muna lahat ang 3 step's ilagay mo ang pang short at plug ang powor pag hinde nag light at may indicator ng tunog ng usb success yun at bitawan ang temporary jumper.

Note:
"IF" nag light at walang indicator sound ng USB ibig sabihin hinde maayos ang pag short nyo ulitin nyo ulit..


JUMPER

http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209622


Step 5.
I open ang HUAWEI_Driver_5.05.02.00 na download nyo at install hintayin nyo lang ng konte kasi silent installer yan. pag ok na.

Step 6.
I open si Balong_USB_Downloader_1.0.1.10 then fallow steps sa picture.

View attachment 243091
View attachment 243092
View attachment 243093
View attachment 243094
View attachment 243095

Step 7.
Open nyo yung Flash Files by: fr3nsis v1.0.0.0 at gayahin ang picture sa baba

http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209700&d=1500012565
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209701&d=1500012582
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209702&d=1500012645
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209703&d=1500012716
http://phcorner.net/#forbidden#/attachment.php?attachmentid=1209704&d=1500035501

Note:
dapat piliin nyo yung port ng 3G PC UI Interface tulad sakin nasa port (COM4) sya yun ang ilalagay nyo if wala yung port pwede ninyong e manual type kasi editable naman yung port box. then tuloy-tuloy na tayo

View attachment 243077

Note:
Hintayin nyo lang matapos na may lalabas na "Remove Battery" pag yan ang lumabas wag nyo tangalin ang power cord at yung usb cord hayaan mo lang at kusang may tutunog na sound indicator ng USB if may narinig kayong indikasyon ng USB.


Step 8
I open si cid-reader by: Dawood1208 at click nyo SCAN ports then dapat yung port naka lagay sa port ay yun paring port ng 3G PC UI Interface tulad sakin nasa port (COM4) if di kayo sure yun ang lalabas tingnan nyo sa device manager. if yun na ang tama e click ang Read IMEI then hintayin pag lumabas ng IMEI No. nyo Click nyo yung Read CID then hintayin if may lumabas then copy and paste ang code sa baba pa isa-isa lang at e click ang send at hintayin ang respond ng code na may lumabas na "OK" then tuloy-toluy na kayo sa iba pang code.. pag OK na po ang lumabas Insert nyo na ang SMART SIM at e close na lahat ng running apps nyo at mga USB at Power at i plug ang LAN Cable at Power.. Ayan may Openline B315s-936 na kayo..

View attachment 243078

View attachment 243079
View attachment 243080
View attachment 243081

NOTE:
Pag nag error or na close ang application ni reader open nyo lang ulit at e continue ang pag lagay ng code..

CODES:

1. copy and paste then send----->>>
at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

2. copy and paste then send----->>> AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,,

3. copy and paste then send----->>> AT ^ SYSCFGEX = "0302", 400000,1,2,800C5 ,,

Your Done


THEN OPEN 192.168.8.1

Username:
admin
Password: admin

Note:
Pag ang GUI ay iba na language sundan lang ang pic sa baba..

View attachment 243082
View attachment 243083
View attachment 243084
View attachment 243085

GOOD LUCK GUYS SANA NAKA TULONG AKO SA INYO..

FORGET to HIT THANKS at wag namang HIT and RUN...FEEDBACK naman

Please support us by liking our Facebook Page and inviting your friends to do the same. Thank you. :)
Made with <3 by You do not have permission to view the full content of this post. Log in or register now. / shadowtech1987
Try ko po to mamaya bossing
 
Status
Not open for further replies.
Back
Top