- Joined
- Jan 27, 2016
- Posts
- 1,166
- Solutions
- 1
- Reaction
- 1,959
- Points
- 636
The ff. Tutorials is intended for educatiomal purposes only.
I am not liable for any danger caused by those who try to do it.
WARNING!
This is very dangerous
Can cause serious burn or explosion when there is explosive nearby... can use as explosive igniter...
This ignitor is one of my many favorites, it can be ignited by either
concentrated sulfuric or nitric acids. It also works excellently as a time
delay, which I will detail later.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Potassium Chlorate Drug Stores and chemical supply
houses
Sugar (Granulated) Grocery Store
Measuring Container (Cup, Tablespoon, etc...)
Storage Container w/tight fitting lid
Mixing Container w/tight fitting lid
Two flat boards (one large 36x36 and the other
small so it can be held in the hand).
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Spread handful at a time the potassium chlorate on the large board and
rub with the other flatboard or a rolling pin until the particles
resemble granulated sugar.
2) Now measure out 2 parts by volume of sugar into the container, and then
add 3 parts by volume of the Potassium Chlorate to the container. Now
recap the container and shake the mixture for 4-5 minutes until it has
a uniform color and consistency.
3) Store for future use in an air tight container, but remember to shake
it up before use to re-mix any settled particles.
-=-=-=-
-USES!-
-=-=-=-
Now for a delayed reaction place the acid in a gelatin capsule and bury
the gelatin capsule in the Potassium Chlorate mixture. Depending on how many
gelatin capsules you use and their size depends on the delay. It can range from
20 minutes to and hour or more. This type of ignitor reaches a temperature of
3,200 degrees farenheit and can ignite most incendiaries. It can also be
compacted into a pipe to create a low power pipe bomb.
Later...
©Jack The Ripper
I am not liable for any danger caused by those who try to do it.
WARNING!
This is very dangerous
Can cause serious burn or explosion when there is explosive nearby... can use as explosive igniter...
This ignitor is one of my many favorites, it can be ignited by either
concentrated sulfuric or nitric acids. It also works excellently as a time
delay, which I will detail later.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Potassium Chlorate Drug Stores and chemical supply
houses
Sugar (Granulated) Grocery Store
Measuring Container (Cup, Tablespoon, etc...)
Storage Container w/tight fitting lid
Mixing Container w/tight fitting lid
Two flat boards (one large 36x36 and the other
small so it can be held in the hand).
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Spread handful at a time the potassium chlorate on the large board and
rub with the other flatboard or a rolling pin until the particles
resemble granulated sugar.
2) Now measure out 2 parts by volume of sugar into the container, and then
add 3 parts by volume of the Potassium Chlorate to the container. Now
recap the container and shake the mixture for 4-5 minutes until it has
a uniform color and consistency.
3) Store for future use in an air tight container, but remember to shake
it up before use to re-mix any settled particles.
-=-=-=-
-USES!-
-=-=-=-
Now for a delayed reaction place the acid in a gelatin capsule and bury
the gelatin capsule in the Potassium Chlorate mixture. Depending on how many
gelatin capsules you use and their size depends on the delay. It can range from
20 minutes to and hour or more. This type of ignitor reaches a temperature of
3,200 degrees farenheit and can ignite most incendiaries. It can also be
compacted into a pipe to create a low power pipe bomb.
Later...
©Jack The Ripper
