Shinsuke Nishizono
Wimpy Kid
- Joined
- Aug 3, 2016
- Posts
- 11,839
- Solutions
- 1
- Reaction
- 6,898
- Points
- 3,784
Since sa other thread ko kung panno ichange ng bootlogo sa SnapDragon devices to this thread -
https://phcorner.net/threads/506906/ , eh maiba naman.
What about MediaTek Devices?
So today, i gonna show how to change your bootlogo on mediatek devices.
From this -
To this -
For this tutorial: I gonna use Cherry Mobile Flare S4 Lite .
Difficulty : Easy
Time to finish : 10-15 minutes.
Requirements:
1. Download the two files which, Logo Bulider and NCK AndroidMTK Cra:ck. Then extract it sa kung saan mo gusto.
2. Now open the NCK AndroidMtk First.
3. Then sa NCK Menu punta ka sa Services tab, then select your processor. Then click Dump Firmware.
4. To start dumping your phone firmware,
"IF Removable ng Battery"
Connect the usb cable without battery, once narinig ng device connected sounds insert the battery.
"IF Non-Removable ng Battery"
Just power off the device by holding power button for 15 secs.
Until makita mo ito.
5. After matapos ng process.
Punta ka sa directory, kung saan nakasaved ng backup rom mo.
6. Now sa nabackup firmware mo, look for the filename LOGO.
Then once you found it, rename it then add .bin sa filename.
7. After renaming, copy the file sa folder ng LogoBuilder.
8. Sa loob ng LogoBuilder, open LogoBuilder.
9. Sa LogoBuilder program, click Create New Project.
Then select the file na nasa sa logobulider folder.
After load the logo.bin, pick a location kung saan mo siya idedecompile. Much better kung gagawaan mo ng folder.
But DO NOT EXIT the program.
10. After maload mo ng image, meron mga 39-45* images sa laman ng logo.bin na iniextract mo.
So punta ka sa folder kung saan ng decompile and recompile ng logo mo.
11. Now prepare your .png image.
Then copy to your decompile folder.
12. After resizing, and replacing the original images. It's time to build it.
Now go back sa logo builder. Meron na Make button sa program. So click it.
After processing, it's time to copy to your phone and boot to TWRP.
13. Boot to TWRP, then click install.
14. Then click on update.zip , then swipe left to confirm.
15. Then click reboot system now.
DONE!
P.S. : Limited lang ng pictures ng nasa post, so para makita ng buong pictures.
Please visit here.
https://phcorner.net/media/albums/1123/
Sa mga UNROOTED, chill. It make take 2-4 days bago ko gawan ng tutorial.
Anyways, salamat sa pagview!
If nakatulong man ito, paki hit lang ng !
Hanggang sa muli.
© Shinsuke Nishizono
https://phcorner.net/threads/506906/ , eh maiba naman.
What about MediaTek Devices?
So today, i gonna show how to change your bootlogo on mediatek devices.
From this -
To this -
For this tutorial: I gonna use Cherry Mobile Flare S4 Lite .
Difficulty : Easy
Time to finish : 10-15 minutes.
Requirements:
- Rooted or Not Rooted Phone
(Pero rooted muna sa ngayon. I rereserved ko na lang dito para sa non-root.) - LogoBulider -
You do not have permission to view the full content of this post. Log in or register now. - NCK Cra:ck (para makuha ng logo.bin from stock/custom rom.) -
Use Search Bar , or visit PHC-O S I R I S thread. - .png image (32-bit image is recommended)
- USB Cable
- TWRP Installed (For Rooted Device)
- SP Flashtool (For Unrooted Device, soon.)
- Patience
1. Download the two files which, Logo Bulider and NCK AndroidMTK Cra:ck. Then extract it sa kung saan mo gusto.
2. Now open the NCK AndroidMtk First.
3. Then sa NCK Menu punta ka sa Services tab, then select your processor. Then click Dump Firmware.
#1 : If ng mtk processor mo hindi kasama sa listahan, pick the closest one. Na malapit na numbero ng processor mo.
#2 : If wala kang MTK Usb Vcom Drivers para maback up or mafetch ng stock rom , please check the driver folder sa program directory ng NCK.
4. To start dumping your phone firmware,
"IF Removable ng Battery"
Connect the usb cable without battery, once narinig ng device connected sounds insert the battery.
"IF Non-Removable ng Battery"
Just power off the device by holding power button for 15 secs.
Until makita mo ito.
5. After matapos ng process.
Punta ka sa directory, kung saan nakasaved ng backup rom mo.
6. Now sa nabackup firmware mo, look for the filename LOGO.
Then once you found it, rename it then add .bin sa filename.
7. After renaming, copy the file sa folder ng LogoBuilder.
8. Sa loob ng LogoBuilder, open LogoBuilder.
9. Sa LogoBuilder program, click Create New Project.
Then select the file na nasa sa logobulider folder.
After load the logo.bin, pick a location kung saan mo siya idedecompile. Much better kung gagawaan mo ng folder.
But DO NOT EXIT the program.
10. After maload mo ng image, meron mga 39-45* images sa laman ng logo.bin na iniextract mo.
So punta ka sa folder kung saan ng decompile and recompile ng logo mo.
11. Now prepare your .png image.
Then copy to your decompile folder.
#1 - Kailangan same resolution sa isang original bootlogo sa modified mo.
https://phcorner.net/media/27903/
Para maresize ng modified image mo, iresize mo sa MSPaint.
https://phcorner.net/media/27902/
https://phcorner.net/media/27904/
#2 - Para sure na mapapalitaan ng bootimage mo , check mo yung picture kung anong original niya.
https://phcorner.net/media/27900/
12. After resizing, and replacing the original images. It's time to build it.
Now go back sa logo builder. Meron na Make button sa program. So click it.
After processing, it's time to copy to your phone and boot to TWRP.
13. Boot to TWRP, then click install.
14. Then click on update.zip , then swipe left to confirm.
15. Then click reboot system now.
DONE!
P.S. : Limited lang ng pictures ng nasa post, so para makita ng buong pictures.
Please visit here.
https://phcorner.net/media/albums/1123/
Sa mga UNROOTED, chill. It make take 2-4 days bago ko gawan ng tutorial.
Anyways, salamat sa pagview!
If nakatulong man ito, paki hit lang ng !
Hanggang sa muli.
© Shinsuke Nishizono
Last edited by a moderator: