DEB7 SCRIPT FOR OCS 64BIT AND 32 BIT
#!/bin/bash
# go to root
cd
# disable ipv6
echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6
sed -i '$ i\echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6' /etc/rc.local
# install wget and curl
apt-get update;apt-get -y install wget curl;
# set time GMT +7
ln -fs /usr/share/zoneinfo/Asia/Jakarta /etc/localtime
# set locale
sed -i 's/AcceptEnv/#AcceptEnv/g' /etc/ssh/sshd_config
service ssh restart
# set repo
wget -O /etc/apt/sources.list "You do not have permission to view the full content of this post. Log in or register now."
wget "You do not have permission to view the full content of this post. Log in or register now."
cat dotdeb.gpg | apt-key add -;rm dotdeb.gpg
# remove unused
apt-get -y --purge remove samba*;
apt-get -y --purge remove apache2*;
apt-get -y --purge remove sendmail*;
apt-get -y --purge remove bind9*;
# update
apt-get update; apt-get -y upgrade;
# install webserver
apt-get -y install nginx php5-fpm php5-cli
# install essential package
apt-get -y install bmon iftop htop nmap axel nano iptables traceroute sysv-rc-conf dnsutils bc nethogs openvpn vnstat less screen psmisc apt-file whois ptunnel ngrep mtr git zsh mrtg snmp snmpd snmp-mibs-downloader unzip unrar rsyslog debsums rkhunter
apt-get -y install build-essential
# disable exim
service exim4 stop
sysv-rc-conf exim4 off
# update apt-file
apt-file update
# setting vnstat
vnstat -u -i venet0
service vnstat restart
# install screenfetch
cd
wget You do not have permission to view the full content of this post. Log in or register now.
mv screenfetch-dev /usr/bin/screenfetch
chmod +x /usr/bin/screenfetch
echo "clear" >> .profile
echo "screenfetch" >> .profile
# install webserver
cd
rm /etc/nginx/sites-enabled/default
rm /etc/nginx/sites-available/default
wget -O /etc/nginx/nginx.conf "You do not have permission to view the full content of this post. Log in or register now."
mkdir -p /home/vps/public_html
echo "<pre>Setup by Choirul Anam</pre>" > /home/vps/public_html/index.html
echo "<?php phpinfo(); ?>" > /home/vps/public_html/info.php
wget -O /etc/nginx/conf.d/vps.conf "You do not have permission to view the full content of this post. Log in or register now."
sed -i 's/listen = \/var\/run\/php5-fpm.sock/listen = 127.0.0.1:9000/g' /etc/php5/fpm/pool.d/You do not have permission to view the full content of this post. Log in or register now.
service php5-fpm restart
service nginx restart
# install openvpn
wget -O /etc/openvpn/openvpn.tar "You do not have permission to view the full content of this post. Log in or register now."
cd /etc/openvpn/
tar xf openvpn.tar
wget -O /etc/openvpn/1194.conf "You do not have permission to view the full content of this post. Log in or register now."
service openvpn restart
sysctl -w net.ipv4.ip_forward=1
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/g' /etc/sysctl.conf
wget -O /etc/iptables.up.rules "You do not have permission to view the full content of this post. Log in or register now."
sed -i '$ i\iptables-restore < /etc/iptables.up.rules' /etc/rc.local
MYIP=`curl -s ifconfig.me`;
MYIP2="s/xxxxxxxxx/$MYIP/g";
sed -i $MYIP2 /etc/iptables.up.rules;
iptables-restore < /etc/iptables.up.rules
service openvpn restart
# configure openvpn client config
cd /etc/openvpn/
wget -O /etc/openvpn/1194-client.ovpn "You do not have permission to view the full content of this post. Log in or register now."
sed -i $MYIP2 /etc/openvpn/1194-client.ovpn;
PASS=`cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 15 | head -n 1`;
useradd -M -s /bin/false Choirul
echo "Choirul:$PASS" | chpasswd
echo "Choirul" > pass.txt
echo "$PASS" >> pass.txt
tar cf client.tar 1194-client.ovpn pass.txt
cp client.tar /home/vps/public_html/
cd
# install badvpn
wget -O /usr/bin/badvpn-udpgw "You do not have permission to view the full content of this post. Log in or register now."
sed -i '$ i\screen -AmdS badvpn badvpn-udpgw --listen-addr 127.0.0.1:7300' /etc/rc.local
chmod +x /usr/bin/badvpn-udpgw
screen -AmdS badvpn badvpn-udpgw --listen-addr 127.0.0.1:7300
# install mrtg
wget -O /etc/snmp/snmpd.conf "You do not have permission to view the full content of this post. Log in or register now."
wget -O /root/mrtg-mem.sh "You do not have permission to view the full content of this post. Log in or register now."
chmod +x /root/mrtg-mem.sh
cd /etc/snmp/
sed -i 's/TRAPDRUN=no/TRAPDRUN=yes/g' /etc/default/snmpd
service snmpd restart
snmpwalk -v 1 -c public localhost 1.3.6.1.4.1.2021.10.1.3.1
mkdir -p /home/vps/public_html/mrtg
cfgmaker --zero-speed 100000000 --global 'WorkDir: /home/vps/public_html/mrtg' --output /etc/mrtg.cfg public@localhost
curl "You do not have permission to view the full content of this post. Log in or register now." >> /etc/mrtg.cfg
sed -i 's/WorkDir: \/var\/www\/mrtg/# WorkDir: \/var\/www\/mrtg/g' /etc/mrtg.cfg
sed -i 's/# Options\[_\]: growright, bits/Options\[_\]: growright/g' /etc/mrtg.cfg
indexmaker --output=/home/vps/public_html/mrtg/index.html /etc/mrtg.cfg
if [ -x /usr/bin/mrtg ] && [ -r /etc/mrtg.cfg ]; then mkdir -p /var/log/mrtg ; env LANG=C /usr/bin/mrtg /etc/mrtg.cfg 2>&1 | tee -a /var/log/mrtg/mrtg.log ; fi
if [ -x /usr/bin/mrtg ] && [ -r /etc/mrtg.cfg ]; then mkdir -p /var/log/mrtg ; env LANG=C /usr/bin/mrtg /etc/mrtg.cfg 2>&1 | tee -a /var/log/mrtg/mrtg.log ; fi
if [ -x /usr/bin/mrtg ] && [ -r /etc/mrtg.cfg ]; then mkdir -p /var/log/mrtg ; env LANG=C /usr/bin/mrtg /etc/mrtg.cfg 2>&1 | tee -a /var/log/mrtg/mrtg.log ; fi
cd
# setting port ssh
sed -i '/Port 22/a Port 143' /etc/ssh/sshd_config
sed -i 's/Port 22/Port 22/g' /etc/ssh/sshd_config
service ssh restart
# install dropbear
apt-get -y install dropbear
sed -i 's/NO_START=1/NO_START=0/g' /etc/default/dropbear
sed -i 's/DROPBEAR_PORT=22/DROPBEAR_PORT=443/g' /etc/default/dropbear
sed -i 's/DROPBEAR_EXTRA_ARGS=/DROPBEAR_EXTRA_ARGS="-p 109 -p 110"/g' /etc/default/dropbear
echo "/bin/false" >> /etc/shells
service ssh restart
service dropbear restart
# install vnstat gui
cd /home/vps/public_html/
wget You do not have permission to view the full content of this post. Log in or register now.
tar xf vnstat_php_frontend-1.5.1.tar.gz
rm vnstat_php_frontend-1.5.1.tar.gz
mv vnstat_php_frontend-1.5.1 vnstat
cd vnstat
sed -i 's/eth0/venet0/g' config.php
sed -i "s/\$iface_list = array('venet0', 'sixxs');/\$iface_list = array('venet0');/g" config.php
sed -i "s/\$language = 'nl';/\$language = 'en';/g" config.php
sed -i 's/Internal/Internet/g' config.php
sed -i '/SixXS IPv6/d' config.php
cd
# install fail2ban
apt-get -y install fail2ban;service fail2ban restart
# install squid3
apt-get -y install squid3
wget -O /etc/squid3/squid.conf "You do not have permission to view the full content of this post. Log in or register now."
sed -i $MYIP2 /etc/squid3/squid.conf;
service squid3 restart
# install webmin
cd
wget "You do not have permission to view the full content of this post. Log in or register now."
dpkg --install webmin_1.670_all.deb;
apt-get -y -f install;
rm /root/webmin_1.670_all.deb
service webmin restart
service vnstat restart
# downlaod script
cd
wget -O speedtest_cli.py "You do not have permission to view the full content of this post. Log in or register now."
wget -O bench-network.sh "You do not have permission to view the full content of this post. Log in or register now."
wget -O ps_mem.py "You do not have permission to view the full content of this post. Log in or register now."
wget -O limit.sh "You do not have permission to view the full content of this post. Log in or register now."
curl You do not have permission to view the full content of this post. Log in or register now. > user-login.sh
curl You do not have permission to view the full content of this post. Log in or register now. > user-expire.sh
curl You do not have permission to view the full content of this post. Log in or register now. > user-limit.sh
echo "0 0 * * * root /root/user-expire.sh" > /etc/cron.d/user-expire
sed -i '$ i\screen -AmdS limit /root/limit.sh' /etc/rc.local
chmod +x bench-network.sh
chmod +x speedtest_cli.py
chmod +x ps_mem.py
chmod +x user-login.sh
chmod +x user-expire.sh
chmod +x user-limit.sh
chmod +x limit.sh
# finalisasi
chown -R www-data:www-data /home/vps/public_html
service nginx start
service php-fpm start
service vnstat restart
service openvpn restart
service snmpd restart
service ssh restart
service dropbear restart
service fail2ban restart
service squid3 restart
service webmin restart
# info
clear
echo "Auto Installer by Choirul Anam" | tee log-install.txt
echo "===============================================" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Service" | tee -a log-install.txt
echo "-------" | tee -a log-install.txt
echo "OpenVPN : TCP 1194 (client config : You do not have permission to view the full content of this post. Log in or register now.)" | tee -a log-install.txt
echo "OpenSSH : 22, 143" | tee -a log-install.txt
echo "Dropbear : 109, 110, 443" | tee -a log-install.txt
echo "Squid3 : 8080 (limit to IP SSH)" | tee -a log-install.txt
echo "badvpn : badvpn-udpgw port 7300" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Tools" | tee -a log-install.txt
echo "-----" | tee -a log-install.txt
echo "axel" | tee -a log-install.txt
echo "bmon" | tee -a log-install.txt
echo "htop" | tee -a log-install.txt
echo "iftop" | tee -a log-install.txt
echo "mtr" | tee -a log-install.txt
echo "nethogs" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Script" | tee -a log-install.txt
echo "------" | tee -a log-install.txt
echo "screenfetch" | tee -a log-install.txt
echo "./ps_mem.py" | tee -a log-install.txt
echo "./speedtest_cli.py --share" | tee -a log-install.txt
echo "./bench-network.sh" | tee -a log-install.txt
echo "./user-login.sh" | tee -a log-install.txt
echo "./user-expire.sh" | tee -a log-install.txt
echo "./user-limit.sh 2" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Account Default (utk SSH dan VPN)" | tee -a log-install.txt
echo "---------------" | tee -a log-install.txt
echo "User : Choirul" | tee -a log-install.txt
echo "Password : $PASS" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Fitur lain" | tee -a log-install.txt
echo "----------" | tee -a log-install.txt
echo "Webmin : You do not have permission to view the full content of this post. Log in or register now." | tee -a log-install.txt
echo "vnstat : You do not have permission to view the full content of this post. Log in or register now." | tee -a log-install.txt
echo "MRTG : You do not have permission to view the full content of this post. Log in or register now." | tee -a log-install.txt
echo "Timezone : Asia/Jakarta" | tee -a log-install.txt
echo "Fail2Ban : [on]" | tee -a log-install.txt
echo "IPv6 : [off]" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Log Installasi --> /root/log-install.txt" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "SILAHKAN REBOOT VPS ANDA !" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "=================================
Credits to LORDEMAX
#!/bin/bash
# go to root
cd
# disable ipv6
echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6
sed -i '$ i\echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6' /etc/rc.local
# install wget and curl
apt-get update;apt-get -y install wget curl;
# set time GMT +7
ln -fs /usr/share/zoneinfo/Asia/Jakarta /etc/localtime
# set locale
sed -i 's/AcceptEnv/#AcceptEnv/g' /etc/ssh/sshd_config
service ssh restart
# set repo
wget -O /etc/apt/sources.list "You do not have permission to view the full content of this post. Log in or register now."
wget "You do not have permission to view the full content of this post. Log in or register now."
cat dotdeb.gpg | apt-key add -;rm dotdeb.gpg
# remove unused
apt-get -y --purge remove samba*;
apt-get -y --purge remove apache2*;
apt-get -y --purge remove sendmail*;
apt-get -y --purge remove bind9*;
# update
apt-get update; apt-get -y upgrade;
# install webserver
apt-get -y install nginx php5-fpm php5-cli
# install essential package
apt-get -y install bmon iftop htop nmap axel nano iptables traceroute sysv-rc-conf dnsutils bc nethogs openvpn vnstat less screen psmisc apt-file whois ptunnel ngrep mtr git zsh mrtg snmp snmpd snmp-mibs-downloader unzip unrar rsyslog debsums rkhunter
apt-get -y install build-essential
# disable exim
service exim4 stop
sysv-rc-conf exim4 off
# update apt-file
apt-file update
# setting vnstat
vnstat -u -i venet0
service vnstat restart
# install screenfetch
cd
wget You do not have permission to view the full content of this post. Log in or register now.
mv screenfetch-dev /usr/bin/screenfetch
chmod +x /usr/bin/screenfetch
echo "clear" >> .profile
echo "screenfetch" >> .profile
# install webserver
cd
rm /etc/nginx/sites-enabled/default
rm /etc/nginx/sites-available/default
wget -O /etc/nginx/nginx.conf "You do not have permission to view the full content of this post. Log in or register now."
mkdir -p /home/vps/public_html
echo "<pre>Setup by Choirul Anam</pre>" > /home/vps/public_html/index.html
echo "<?php phpinfo(); ?>" > /home/vps/public_html/info.php
wget -O /etc/nginx/conf.d/vps.conf "You do not have permission to view the full content of this post. Log in or register now."
sed -i 's/listen = \/var\/run\/php5-fpm.sock/listen = 127.0.0.1:9000/g' /etc/php5/fpm/pool.d/You do not have permission to view the full content of this post. Log in or register now.
service php5-fpm restart
service nginx restart
# install openvpn
wget -O /etc/openvpn/openvpn.tar "You do not have permission to view the full content of this post. Log in or register now."
cd /etc/openvpn/
tar xf openvpn.tar
wget -O /etc/openvpn/1194.conf "You do not have permission to view the full content of this post. Log in or register now."
service openvpn restart
sysctl -w net.ipv4.ip_forward=1
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/g' /etc/sysctl.conf
wget -O /etc/iptables.up.rules "You do not have permission to view the full content of this post. Log in or register now."
sed -i '$ i\iptables-restore < /etc/iptables.up.rules' /etc/rc.local
MYIP=`curl -s ifconfig.me`;
MYIP2="s/xxxxxxxxx/$MYIP/g";
sed -i $MYIP2 /etc/iptables.up.rules;
iptables-restore < /etc/iptables.up.rules
service openvpn restart
# configure openvpn client config
cd /etc/openvpn/
wget -O /etc/openvpn/1194-client.ovpn "You do not have permission to view the full content of this post. Log in or register now."
sed -i $MYIP2 /etc/openvpn/1194-client.ovpn;
PASS=`cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 15 | head -n 1`;
useradd -M -s /bin/false Choirul
echo "Choirul:$PASS" | chpasswd
echo "Choirul" > pass.txt
echo "$PASS" >> pass.txt
tar cf client.tar 1194-client.ovpn pass.txt
cp client.tar /home/vps/public_html/
cd
# install badvpn
wget -O /usr/bin/badvpn-udpgw "You do not have permission to view the full content of this post. Log in or register now."
sed -i '$ i\screen -AmdS badvpn badvpn-udpgw --listen-addr 127.0.0.1:7300' /etc/rc.local
chmod +x /usr/bin/badvpn-udpgw
screen -AmdS badvpn badvpn-udpgw --listen-addr 127.0.0.1:7300
# install mrtg
wget -O /etc/snmp/snmpd.conf "You do not have permission to view the full content of this post. Log in or register now."
wget -O /root/mrtg-mem.sh "You do not have permission to view the full content of this post. Log in or register now."
chmod +x /root/mrtg-mem.sh
cd /etc/snmp/
sed -i 's/TRAPDRUN=no/TRAPDRUN=yes/g' /etc/default/snmpd
service snmpd restart
snmpwalk -v 1 -c public localhost 1.3.6.1.4.1.2021.10.1.3.1
mkdir -p /home/vps/public_html/mrtg
cfgmaker --zero-speed 100000000 --global 'WorkDir: /home/vps/public_html/mrtg' --output /etc/mrtg.cfg public@localhost
curl "You do not have permission to view the full content of this post. Log in or register now." >> /etc/mrtg.cfg
sed -i 's/WorkDir: \/var\/www\/mrtg/# WorkDir: \/var\/www\/mrtg/g' /etc/mrtg.cfg
sed -i 's/# Options\[_\]: growright, bits/Options\[_\]: growright/g' /etc/mrtg.cfg
indexmaker --output=/home/vps/public_html/mrtg/index.html /etc/mrtg.cfg
if [ -x /usr/bin/mrtg ] && [ -r /etc/mrtg.cfg ]; then mkdir -p /var/log/mrtg ; env LANG=C /usr/bin/mrtg /etc/mrtg.cfg 2>&1 | tee -a /var/log/mrtg/mrtg.log ; fi
if [ -x /usr/bin/mrtg ] && [ -r /etc/mrtg.cfg ]; then mkdir -p /var/log/mrtg ; env LANG=C /usr/bin/mrtg /etc/mrtg.cfg 2>&1 | tee -a /var/log/mrtg/mrtg.log ; fi
if [ -x /usr/bin/mrtg ] && [ -r /etc/mrtg.cfg ]; then mkdir -p /var/log/mrtg ; env LANG=C /usr/bin/mrtg /etc/mrtg.cfg 2>&1 | tee -a /var/log/mrtg/mrtg.log ; fi
cd
# setting port ssh
sed -i '/Port 22/a Port 143' /etc/ssh/sshd_config
sed -i 's/Port 22/Port 22/g' /etc/ssh/sshd_config
service ssh restart
# install dropbear
apt-get -y install dropbear
sed -i 's/NO_START=1/NO_START=0/g' /etc/default/dropbear
sed -i 's/DROPBEAR_PORT=22/DROPBEAR_PORT=443/g' /etc/default/dropbear
sed -i 's/DROPBEAR_EXTRA_ARGS=/DROPBEAR_EXTRA_ARGS="-p 109 -p 110"/g' /etc/default/dropbear
echo "/bin/false" >> /etc/shells
service ssh restart
service dropbear restart
# install vnstat gui
cd /home/vps/public_html/
wget You do not have permission to view the full content of this post. Log in or register now.
tar xf vnstat_php_frontend-1.5.1.tar.gz
rm vnstat_php_frontend-1.5.1.tar.gz
mv vnstat_php_frontend-1.5.1 vnstat
cd vnstat
sed -i 's/eth0/venet0/g' config.php
sed -i "s/\$iface_list = array('venet0', 'sixxs');/\$iface_list = array('venet0');/g" config.php
sed -i "s/\$language = 'nl';/\$language = 'en';/g" config.php
sed -i 's/Internal/Internet/g' config.php
sed -i '/SixXS IPv6/d' config.php
cd
# install fail2ban
apt-get -y install fail2ban;service fail2ban restart
# install squid3
apt-get -y install squid3
wget -O /etc/squid3/squid.conf "You do not have permission to view the full content of this post. Log in or register now."
sed -i $MYIP2 /etc/squid3/squid.conf;
service squid3 restart
# install webmin
cd
wget "You do not have permission to view the full content of this post. Log in or register now."
dpkg --install webmin_1.670_all.deb;
apt-get -y -f install;
rm /root/webmin_1.670_all.deb
service webmin restart
service vnstat restart
# downlaod script
cd
wget -O speedtest_cli.py "You do not have permission to view the full content of this post. Log in or register now."
wget -O bench-network.sh "You do not have permission to view the full content of this post. Log in or register now."
wget -O ps_mem.py "You do not have permission to view the full content of this post. Log in or register now."
wget -O limit.sh "You do not have permission to view the full content of this post. Log in or register now."
curl You do not have permission to view the full content of this post. Log in or register now. > user-login.sh
curl You do not have permission to view the full content of this post. Log in or register now. > user-expire.sh
curl You do not have permission to view the full content of this post. Log in or register now. > user-limit.sh
echo "0 0 * * * root /root/user-expire.sh" > /etc/cron.d/user-expire
sed -i '$ i\screen -AmdS limit /root/limit.sh' /etc/rc.local
chmod +x bench-network.sh
chmod +x speedtest_cli.py
chmod +x ps_mem.py
chmod +x user-login.sh
chmod +x user-expire.sh
chmod +x user-limit.sh
chmod +x limit.sh
# finalisasi
chown -R www-data:www-data /home/vps/public_html
service nginx start
service php-fpm start
service vnstat restart
service openvpn restart
service snmpd restart
service ssh restart
service dropbear restart
service fail2ban restart
service squid3 restart
service webmin restart
# info
clear
echo "Auto Installer by Choirul Anam" | tee log-install.txt
echo "===============================================" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Service" | tee -a log-install.txt
echo "-------" | tee -a log-install.txt
echo "OpenVPN : TCP 1194 (client config : You do not have permission to view the full content of this post. Log in or register now.)" | tee -a log-install.txt
echo "OpenSSH : 22, 143" | tee -a log-install.txt
echo "Dropbear : 109, 110, 443" | tee -a log-install.txt
echo "Squid3 : 8080 (limit to IP SSH)" | tee -a log-install.txt
echo "badvpn : badvpn-udpgw port 7300" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Tools" | tee -a log-install.txt
echo "-----" | tee -a log-install.txt
echo "axel" | tee -a log-install.txt
echo "bmon" | tee -a log-install.txt
echo "htop" | tee -a log-install.txt
echo "iftop" | tee -a log-install.txt
echo "mtr" | tee -a log-install.txt
echo "nethogs" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Script" | tee -a log-install.txt
echo "------" | tee -a log-install.txt
echo "screenfetch" | tee -a log-install.txt
echo "./ps_mem.py" | tee -a log-install.txt
echo "./speedtest_cli.py --share" | tee -a log-install.txt
echo "./bench-network.sh" | tee -a log-install.txt
echo "./user-login.sh" | tee -a log-install.txt
echo "./user-expire.sh" | tee -a log-install.txt
echo "./user-limit.sh 2" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Account Default (utk SSH dan VPN)" | tee -a log-install.txt
echo "---------------" | tee -a log-install.txt
echo "User : Choirul" | tee -a log-install.txt
echo "Password : $PASS" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Fitur lain" | tee -a log-install.txt
echo "----------" | tee -a log-install.txt
echo "Webmin : You do not have permission to view the full content of this post. Log in or register now." | tee -a log-install.txt
echo "vnstat : You do not have permission to view the full content of this post. Log in or register now." | tee -a log-install.txt
echo "MRTG : You do not have permission to view the full content of this post. Log in or register now." | tee -a log-install.txt
echo "Timezone : Asia/Jakarta" | tee -a log-install.txt
echo "Fail2Ban : [on]" | tee -a log-install.txt
echo "IPv6 : [off]" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "Log Installasi --> /root/log-install.txt" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "SILAHKAN REBOOT VPS ANDA !" | tee -a log-install.txt
echo "" | tee -a log-install.txt
echo "=================================
Credits to LORDEMAX
