What's new

Closed Bm622m 2013 downgrade to bm622m 2012..

Status
Not open for further replies.

jhayzelle

Honorary Poster
eto napo yun sir lift yung pinag uusapan natin kanina... yung bm622m 2013 sa may firmware ng smart na d na mapasok yung giu.. sana po maayus ko nto newbie pa kasi pg dting sa ganitong bagay...
 

Senpai

Conqueror
Established
Bm622m 2013 > dv smart gp > bm622m 2012

ready ka sir ng smart gp v7 firmware, use winspreader

step by step

1.open winspreader,load your Firmware smart gp
2.choose your network adapter, realtek pcie or atheros para iwas sira
3. Tagalin sa saksakan si modem
4.Hit start on winspreader pag nagsstart na
5. isaksak muli si modem adapter
6. hayaan lang mag disco light taas baba ang ilaw
7.pag all 5 led lights open, Click stop kay winspreader at hugutin si modem
8. after succesful flashing magiging 192.168.15.1 or 10.1.1.254 ang GUI

pag 192.168.1 or 10.254.1.1 na ang gui


Set mo si IPV4 mo static ip

192.168.15.2 or 10.1.1.1

at iflash si bm622m 2012


After succesful flashing ulit


punta ulit sa IPV4 mo, click mo yung automatically recieve na, bale default na,hindi na static


Open telnet 192.168.254.1 or putty 192.168.254.1 port 22

type in


Firefly

$P4mb1h1r4N4m4nT0!!

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

ayan, 622m 2012 na,parang bago ang modem mo :)


Tried and tested na 4x ko na ginagawa toWrong section po ;) dapat sa Wimax canopy help and request section, next time po 👍
 
Last edited by a moderator:

jhayzelle

Honorary Poster
try ko to sir maraming salamt... off muna ako subkan ko kaso nga pla ung fimrware ng smartv7 ko fwd na atan mero kapo ba d(y)yan...ay sir hindi napo nagdidsko ang ligth nang modem ko pag napapalit ng fw.. ok lang po ba un...
 
Last edited by a moderator:

jhayzelle

Honorary Poster
sir hindi napo kayang ibalik sa globe yung fw nia ilang try na ako palaging cdc xa kea hinayaan ko nalang xa sa gp fw nia.salamat po sa tuts :LOL: kung may mac sana ng smart at key at pem para masubukan ko if gumagana pa sya...:)
 

jhayzelle

Honorary Poster
sinunda ku naman po eh.. ito po ba gina gamit pang flashing
type mo sa cmd w/ admin rights
arp -d
nbtstat -R
ipconfig /flushdns
ipconfig /release
ipconfig /renew
ito kasi aking..gamit
 

Senpai

Conqueror
Established
basahin mo muna yung nasa taas na step by step, should be 2013 model mo, mahirap talaga magdowngrade, yan na yung fastest way na maiitulong ko sa inyo :D
 

bunnyrica

Enthusiast
Bm622m 2013 > dv smart gp > bm622m 2012

ready ka sir ng smart gp v7 firmware, use winspreader

step by step

1.open winspreader,load your Firmware smart gp
2.choose your network adapter, realtek pcie or atheros para iwas sira
3. Tagalin sa saksakan si modem
4.Hit start on winspreader pag nagsstart na
5. isaksak muli si modem adapter
6. hayaan lang mag disco light taas baba ang ilaw
7.pag all 5 led lights open, Click stop kay winspreader at hugutin si modem
8. after succesful flashing magiging 192.168.15.1 or 10.1.1.254 ang GUI

pag 192.168.1 or 10.254.1.1 na ang gui


Set mo si IPV4 mo static ip

192.168.15.2 or 10.1.1.1

at iflash si bm622m 2012


After succesful flashing ulit


punta ulit sa IPV4 mo, click mo yung automatically recieve na, bale default na,hindi na static


Open telnet 192.168.254.1 or putty 192.168.254.1 port 22

type in


Firefly

$P4mb1h1r4N4m4nT0!!

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

ayan, 622m 2012 na,parang bago ang modem mo :)


Tried and tested na 4x ko na ginagawa toWrong section po ;) dapat sa Wimax canopy help and request section, next time po (y)
salamat boss at try ko po
 
Last edited by a moderator:
Status
Not open for further replies.
Top