capusijake
Honorary Poster
- Joined
- Dec 18, 2015
- Posts
- 279
- Reaction
- 92
- Points
- 156
- Age
- 24
"Credits to the original author of the thread from the other forum, I ask him for his permission for me to post this thread here at PHC. I also ask him for the permission for me to change or add some information regarding this thread and tutorial. Thanks"
Credits to Sir Mulot.
This thread is for the Debranded B315s-936 modems with firmware that can't access USB mode because of the firmware version that wants to change their modem firmware / full admin access. Firmware version 21.313
"B315s-936 Downgrading From 21.313 Firmware Version | No Need Mag-USB Mode"
Firmware list:
Choose kung anung gamit niyo ngayon at gustong ipalit:
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
Other firmwares
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
Requirements:
1. PuTTY or cmd ng windows
2. E5186 Toolbox
3. Multicast Upgrade Tool
4. USB Male to Male Cord (kung wala nito, may alternative naman
Procedure:
1. Connect 936 sa LAN, Open E5186 Toolbox, enter admin password, Connect. Huwag i-click ang GET. See SS.
2. Confirm if OK ang response and Exit.
3. Open PuTTY, type IP, select Telnet, Click Open or See the screenshot. Pwede rin, open cmd, type telnet 192.168.8.1
4. Type ati (aattii in putty) to confirm na connected tayo sa modem at ung commands sa baba.
at^sfm=1
at^reset
5. Unplug power adapter ng modem.
6. Set static IP.
(You can use the IP from the attached image, if ever the flashing is failed and the LED turns RED, try to use this one, credits sa B315s-936 Debranding Tutorial.)
IP= 192.168.1.100
Subnet Mask= 255.255.255.0
Gateway= 192.168.1.1
Preferred DNS= 192.168.1.1 yung sa baba secondary blank na then ok
7. Open Multicast Upgrade Tool, Select Network Card, piliin kung anong firmware ang gamit niyo sa modem at kung ano gustong ipalit, click Start.
(Requires USB Cord)
8. Plug power adapter ng modem, wait mapunta sa USB Mode(Green), Tanggalin ang LAN at isaksak ang male to male USB Cord, modem at PC. Alams na.
Open CID Reader, DC Unlocker, etc. I'm sure meron kayo niyan at kung panu paganahin.
Enter commands:
at^sfm=0
at^reset
(Do not requires USB Cord just LAN Cable)
8. kung wala kang USB Cord, pwede naman, kapag nag USB Mode na (Steady Green) hayaang naka-insert ang LAN cable, tanggalin ang power adapter then saksak ulit, Remove Static IP, Open the E5186 Toolbox log in as admin, gawin ulit yung produce 1 (enabling the Telnet) then sa telnet itype and command :
at^sfm=0
at^reset
(Do not requires USB Cord just LAN Cable)
9.Log in sa GUI 192.168.8.1, Restore Defaults, then ok na you can skip prodecude 9, is this methos and ginawa nyo (No USB Cord)
(After Produce 8 Requires USB Cord)
9. Remove USB Cord, Remove static IP sa LAN at iset sa Obtain automatically.
Open browser(incognito mode), type 192.168.8.1, login, hanapin ang Restore Defaults, click OK, wait mag-reboot ang modem.
Note: Yung mga nakakita na po ng original thread, may mga binago or dinagdag po ako dito, kase po defective yung USB Cord ko.
Thanks ulit kay Sir Mulot and dun po sa mga naka discover sa command for giving his permission to post this thread here.
Credits to Sir Mulot.
This thread is for the Debranded B315s-936 modems with firmware that can't access USB mode because of the firmware version that wants to change their modem firmware / full admin access. Firmware version 21.313
"B315s-936 Downgrading From 21.313 Firmware Version | No Need Mag-USB Mode"
Firmware list:
Choose kung anung gamit niyo ngayon at gustong ipalit:
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
Other firmwares
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
Requirements:
1. PuTTY or cmd ng windows
2. E5186 Toolbox
3. Multicast Upgrade Tool
4. USB Male to Male Cord (kung wala nito, may alternative naman
Procedure:
1. Connect 936 sa LAN, Open E5186 Toolbox, enter admin password, Connect. Huwag i-click ang GET. See SS.
2. Confirm if OK ang response and Exit.
3. Open PuTTY, type IP, select Telnet, Click Open or See the screenshot. Pwede rin, open cmd, type telnet 192.168.8.1
4. Type ati (aattii in putty) to confirm na connected tayo sa modem at ung commands sa baba.
at^sfm=1
at^reset
5. Unplug power adapter ng modem.
6. Set static IP.
(You can use the IP from the attached image, if ever the flashing is failed and the LED turns RED, try to use this one, credits sa B315s-936 Debranding Tutorial.)
IP= 192.168.1.100
Subnet Mask= 255.255.255.0
Gateway= 192.168.1.1
Preferred DNS= 192.168.1.1 yung sa baba secondary blank na then ok
7. Open Multicast Upgrade Tool, Select Network Card, piliin kung anong firmware ang gamit niyo sa modem at kung ano gustong ipalit, click Start.
(Requires USB Cord)
8. Plug power adapter ng modem, wait mapunta sa USB Mode(Green), Tanggalin ang LAN at isaksak ang male to male USB Cord, modem at PC. Alams na.
Open CID Reader, DC Unlocker, etc. I'm sure meron kayo niyan at kung panu paganahin.
Enter commands:
at^sfm=0
at^reset
(Do not requires USB Cord just LAN Cable)
8. kung wala kang USB Cord, pwede naman, kapag nag USB Mode na (Steady Green) hayaang naka-insert ang LAN cable, tanggalin ang power adapter then saksak ulit, Remove Static IP, Open the E5186 Toolbox log in as admin, gawin ulit yung produce 1 (enabling the Telnet) then sa telnet itype and command :
at^sfm=0
at^reset
(Do not requires USB Cord just LAN Cable)
9.Log in sa GUI 192.168.8.1, Restore Defaults, then ok na you can skip prodecude 9, is this methos and ginawa nyo (No USB Cord)
(After Produce 8 Requires USB Cord)
9. Remove USB Cord, Remove static IP sa LAN at iset sa Obtain automatically.
Open browser(incognito mode), type 192.168.8.1, login, hanapin ang Restore Defaults, click OK, wait mag-reboot ang modem.
Note: Yung mga nakakita na po ng original thread, may mga binago or dinagdag po ako dito, kase po defective yung USB Cord ko.
Thanks ulit kay Sir Mulot and dun po sa mga naka discover sa command for giving his permission to post this thread here.
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: