UPDATE: Actual speedtests from ID4 and ID5L posted.
This custom firmware for PLDT Smart Prepaid Home Wi-Fi Devices/CPEs is meant to replace the the stock firmware of the unit with something that turns it into a networking equipment powerhouse.
This makes the device more useful and functional, catering to the needs of the client from amateur to professional use. Here's a video preview of the CFW in operation:
You do not have permission to view the full content of this post. Log in or register now.
And here's a useless feature I added while playing with the LEDs on ID4/ID5/L, in case you get bored and wish to have some distraction :
ID4: You do not have permission to view the full content of this post. Log in or register now.
ID5: You do not have permission to view the full content of this post. Log in or register now.
Here are some of the things you get with this CFW:
What devices are supported?
Technical support is provided ONLY for the firmware installation and default configuration, and custom commands. Support for specific use-case scenarios and requests for different firmware setup maybe provided with value-added services.
The device NEEDS to be sent in for the FIRST-TIME installation.
This custom firmware for PLDT Smart Prepaid Home Wi-Fi Devices/CPEs is meant to replace the the stock firmware of the unit with something that turns it into a networking equipment powerhouse.
This makes the device more useful and functional, catering to the needs of the client from amateur to professional use. Here's a video preview of the CFW in operation:
You do not have permission to view the full content of this post. Log in or register now.
And here's a useless feature I added while playing with the LEDs on ID4/ID5/L, in case you get bored and wish to have some distraction :
ID4: You do not have permission to view the full content of this post. Log in or register now.
ID5: You do not have permission to view the full content of this post. Log in or register now.
Here are some of the things you get with this CFW:
- WPA3 wireless security, band-steering (aka 802.11r Fast Transition for dual-band Wi-Fi), mesh Wi-Fi
- VLANs
- QoS with bandwidth limiter
- SQM (minimize bufferbloat)
- Advertisements blocking
- multi-WAN for four or more LAN ports
- Wireless scheduling, WOL
- Wireguard (OpenVPN installable)
- dnscrypt-proxy2 (secure and faster DNS queries, anonymize DNS requests, bypass restrictions)
- Dynamic DNS
- UPnP/NAT-PMP
- Installable software packages
- WPS button as WiFi on/off button
- LEDs control
- Antenna control (for units with antenna ports)
- USB storage (ext4, for units with USB port)
- Transmission bt-client (for units with USB port)
- Fully working mobile network data access (NO MORE sudden disappearing internet)
- Works on ALL networks
- No more manufacturer OTAs
- Permanent CFW installation
- Modem and signal information
- Band/PCI locking
- Change IMEI
- SMS
- and many more
What devices are supported?
- Boosteven R051
- Evoluzn FX-ID3
- Evoluzn FX-ID4
- Evoluzn FX-ID5
- Evoluzn FX-ID5L
- ZTE MF286RA
- other units may be supported soon
Technical support is provided ONLY for the firmware installation and default configuration, and custom commands. Support for specific use-case scenarios and requests for different firmware setup maybe provided with value-added services.
The device NEEDS to be sent in for the FIRST-TIME installation.
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: