Closed VIEW WIFI PASSWORD IN ANROID WITHOUT ROOT HOW?

[zxcgil]

Paano po ma view wifi password kapag connected na po, ng hindi kailangan naka root. Thanks sa sumagot

 

[fuzzywubby]

upp

 

[3_pol_6]

You need a PC to connect your mobile through USB (ADB driver installed). Then refer to the following steps:

MOBILE SIDE:
Step 1: Access the Developer authority
To access the files that Android uses to run passwords, you must first become a developer. This is very simple.
Get your Android phone and go to settings. Scroll down and find "About phone." Tap on it and scroll down again to find Build number.
Tap on this "build number" 5 to 6 times until a message pops up saying, "You are now a developer".

Step 2: Enable the debugging
Go back to Settings. Scroll down for developer options. Turn on the button for "Android/USB debugging".

PC SIDE:
Step 3: Install ADB drivers (google for ADB download links)

Step 4: Test the ADB
To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it's working properly, you should see a device in this list.

Step 5: Find Android wifi password
Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords
Lastly, open the file with a notepad and there you go.

All credit to JD...

 

[fuzzywubby]

You need a PC to connect your mobile through USB (ADB driver installed). Then refer to the following steps:

MOBILE SIDE:
Step 1: Access the Developer authority
To access the files that Android uses to run passwords, you must first become a developer. This is very simple.
Get your Android phone and go to settings. Scroll down and find "About phone." Tap on it and scroll down again to find Build number.
Tap on this "build number" 5 to 6 times until a message pops up saying, "You are now a developer".

Step 2: Enable the debugging
Go back to Settings. Scroll down for developer options. Turn on the button for "Android/USB debugging".

PC SIDE:
Step 3: Install ADB drivers (google for ADB download links)

Step 4: Test the ADB
To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it's working properly, you should see a device in this list.

Step 5: Find Android wifi password
Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords
Lastly, open the file with a notepad and there you go.

All credit to JD...

matry nga paps. salamat

 

[Mahesvara16]

matry nga paps. salamat

Boss pafeedback kung working hahhaa

 

[joshuarapaka]

You need a PC to connect your mobile through USB (ADB driver installed). Then refer to the following steps:

MOBILE SIDE:
Step 1: Access the Developer authority
To access the files that Android uses to run passwords, you must first become a developer. This is very simple.
Get your Android phone and go to settings. Scroll down and find "About phone." Tap on it and scroll down again to find Build number.
Tap on this "build number" 5 to 6 times until a message pops up saying, "You are now a developer".

Step 2: Enable the debugging
Go back to Settings. Scroll down for developer options. Turn on the button for "Android/USB debugging".

PC SIDE:
Step 3: Install ADB drivers (google for ADB download links)

Step 4: Test the ADB
To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it's working properly, you should see a device in this list.

Step 5: Find Android wifi password
Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords
Lastly, open the file with a notepad and there you go.

All credit to JD...

Try ko po to salamat

 

[zailexis]

kung kaya naman po e sa dashboard nalang.. bihira lang naman nagpapalit ng name at password dun e..

 

[Mahesvara16]

Try ko po to salamat

Boss balik ka kung working haha

 

[-GRiM]

up

 

[introders]

wrong section tittle misleading reported!

 

[fuzzywubby]

You need a PC to connect your mobile through USB (ADB driver installed). Then refer to the following steps:

MOBILE SIDE:
Step 1: Access the Developer authority
To access the files that Android uses to run passwords, you must first become a developer. This is very simple.
Get your Android phone and go to settings. Scroll down and find "About phone." Tap on it and scroll down again to find Build number.
Tap on this "build number" 5 to 6 times until a message pops up saying, "You are now a developer".

Step 2: Enable the debugging
Go back to Settings. Scroll down for developer options. Turn on the button for "Android/USB debugging".

PC SIDE:
Step 3: Install ADB drivers (google for ADB download links)

Step 4: Test the ADB
To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it's working properly, you should see a device in this list.

Step 5: Find Android wifi password
Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords
Lastly, open the file with a notepad and there you go.

All credit to JD...

unknown command daw paps sa adb

 

[3_pol_6]

unknown command daw paps sa adb

siguraduhin lang boss na properly installed ang ADB driver mo, working po sa akin windows 10 system

 

[Mahesvara16]

siguraduhin lang boss na properly installed ang ADB driver mo, working po sa akin windows 10 system

View attachment 789373

Baka sa windows 10 lang to ah. Unknown command din sakin ih.

 

[fuzzywubby]

siguraduhin lang boss na properly installed ang ADB driver mo, working po sa akin windows 10 system

View attachment 789373

Gawa ikaw thread paps? badly meeded lang kasi e. Pero thanks padin po.

 

[shinikko]

You need a PC to connect your mobile through USB (ADB driver installed). Then refer to the following steps:

MOBILE SIDE:
Step 1: Access the Developer authority
To access the files that Android uses to run passwords, you must first become a developer. This is very simple.
Get your Android phone and go to settings. Scroll down and find "About phone." Tap on it and scroll down again to find Build number.
Tap on this "build number" 5 to 6 times until a message pops up saying, "You are now a developer".

Step 2: Enable the debugging
Go back to Settings. Scroll down for developer options. Turn on the button for "Android/USB debugging".

PC SIDE:
Step 3: Install ADB drivers (google for ADB download links)

Step 4: Test the ADB
To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it's working properly, you should see a device in this list.

Step 5: Find Android wifi password
Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords
Lastly, open the file with a notepad and there you go.

All credit to JD...

sir pa try po ako.salamat po