Hi! This is my first time creating a thread here so forgive me if I made some mistakes. This thread is created for the purpose of openlining Globe M022T and M022 Pocket wifi devices respectively
All firmwares that are used here are coming from these sources:
nicolenikirby - Ugandan Firmware (You do not have permission to view the full content of this post. Log in or register now.)
totoymola 11– Openlined Globe M022T Firmware
(You do not have permission to view the full content of this post. Log in or register now.)
You do not have permission to view the full content of this post. Log in or register now. – original Globe M022 Firmware
(You do not have permission to view the full content of this post. Log in or register now.)
So lets start:
GLOBE M022T
1. Download the firmware from the link below:
You do not have permission to view the full content of this post. Log in or register now.
2. Reflash your firmware according to the procedure of Sir Argotron (https://phcorner.net/t/smart-bro-evoluzn-fx-pr2l-unlocking-reviving-update-12-01-16.216720/)
3. Insert a sim card from other network and Log in using “smartbro” as username and password
4. Click “PN Required” and enter the MEP CODE “123456”
5. Wait until the device is receiving signal
Features:
LCD is now fixed (now showing in startup screen “Welcome” instead of the “BOLT” logo)
Openline Firmware
Issues found according to feedbacks with their possible reasons and solutions:
1: WPS is now RESET button (not good)- not fixed
2: SMARTBRO BRANDED using FXPR2 LCD firmware - because we are using smart webdata.bin to openline
3. Choppy signal (Will update pa) - try the new firmware uploaded
4. NO STOCK FIRMWARE (to revert back to globe) - stock firmware not yet available
5. Weird behavior It keeps vibrating for no reason at any interval - i didnt even know that our devices vibrate
6. Openlined (yes)
7. To access WebUI -- 192.168.1.1 not 8.1- because we are using smart webdata.bin to open line so no fix
8. If for some reasons, nakahide SSID nyo just press WPS (now reset button) then search "Smartbro" as new SSID - plug the pocket wifi to a laptop, access the the 192.168.1.1 from there and change the wireless settings.
GLOBE M022
1. Download the firmware from the link below:
You do not have permission to view the full content of this post. Log in or register now.
2. Reflash your firmware According to the procedure of Sir argotron (https://phcorner.net/t/smart-bro-evoluzn-fx-pr2l-unlocking-reviving-update-12-01-16.216720/)
3. Insert a sim card from other network and Log in using “smartbro” as username and password
4. Click “PN Required” and enter the MEP CODE “123456”
5. Wait until the device is receiving signal
Features:
Fully Openlined Firmware
LED Lights Fully working
Issues:
WiFI not connecting (sometimes) just restart the device (based on experience)
Credits to sir argotron, nicolenikirby, totoymola11, You do not have permission to view the full content of this post. Log in or register now., kamputs and others who contributed a lot in this thread.
All firmwares that are used here are coming from these sources:
nicolenikirby - Ugandan Firmware (You do not have permission to view the full content of this post. Log in or register now.)
totoymola 11– Openlined Globe M022T Firmware
(You do not have permission to view the full content of this post. Log in or register now.)
You do not have permission to view the full content of this post. Log in or register now. – original Globe M022 Firmware
(You do not have permission to view the full content of this post. Log in or register now.)
So lets start:
GLOBE M022T
1. Download the firmware from the link below:
You do not have permission to view the full content of this post. Log in or register now.
2. Reflash your firmware according to the procedure of Sir Argotron (https://phcorner.net/t/smart-bro-evoluzn-fx-pr2l-unlocking-reviving-update-12-01-16.216720/)
3. Insert a sim card from other network and Log in using “smartbro” as username and password
4. Click “PN Required” and enter the MEP CODE “123456”
5. Wait until the device is receiving signal
Features:
LCD is now fixed (now showing in startup screen “Welcome” instead of the “BOLT” logo)
Openline Firmware
Issues found according to feedbacks with their possible reasons and solutions:
1: WPS is now RESET button (not good)- not fixed
2: SMARTBRO BRANDED using FXPR2 LCD firmware - because we are using smart webdata.bin to openline
3. Choppy signal (Will update pa) - try the new firmware uploaded
4. NO STOCK FIRMWARE (to revert back to globe) - stock firmware not yet available
5. Weird behavior It keeps vibrating for no reason at any interval - i didnt even know that our devices vibrate
6. Openlined (yes)
7. To access WebUI -- 192.168.1.1 not 8.1- because we are using smart webdata.bin to open line so no fix
8. If for some reasons, nakahide SSID nyo just press WPS (now reset button) then search "Smartbro" as new SSID - plug the pocket wifi to a laptop, access the the 192.168.1.1 from there and change the wireless settings.
GLOBE M022
1. Download the firmware from the link below:
You do not have permission to view the full content of this post. Log in or register now.
2. Reflash your firmware According to the procedure of Sir argotron (https://phcorner.net/t/smart-bro-evoluzn-fx-pr2l-unlocking-reviving-update-12-01-16.216720/)
3. Insert a sim card from other network and Log in using “smartbro” as username and password
4. Click “PN Required” and enter the MEP CODE “123456”
5. Wait until the device is receiving signal
Features:
Fully Openlined Firmware
LED Lights Fully working
Issues:
WiFI not connecting (sometimes) just restart the device (based on experience)
Credits to sir argotron, nicolenikirby, totoymola11, You do not have permission to view the full content of this post. Log in or register now., kamputs and others who contributed a lot in this thread.
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: