try these:
1- turn off and unplug wait for 1 minute.
2- open side panel/case where you can touch the hard disk.
3- plug back and turn on while holding/touching the hard disk.
assessment:
-if the hard disk vibrates when you turn the pc on, this means your windows files got corrupted and you can fix this by windows cd repair or *REFORMAT.
-if the hard disk vibrates but with a clicking sound, your hard disk is already defective and you need to buy a new hard disk (unless you want to repair the hard disk, tuts on YøùTùbé)
-if the hard disk doesn't vibrate at all, try to reconnect its connectors maybe they are just loose and reboot again, if still not vibrating then your hard disk could be dead.
NOTE: always turn your pc OFF and unplug power cord if you are gonna unplug/yank/anything the connectors inside the sytem unit.
next reply will be based on your response, Thanks
*edited
most likely you only have a corrupt windows files due to a recent BAD installation of a BAD program/malware/spyware.
Install mo na lang uli ang OS. pwede rin restore previous date para di masyadong matagal ang gagawin mo pero kung corrupted na, new installation lang talaga ang pweding gawin.
try these:
1- turn off and unplug wait for 1 minute.
2- open side panel/case where you can touch the hard disk.
3- plug back and turn on while holding/touching the hard disk.
assessment:
-if the hard disk vibrates when you turn the pc on, this means your windows files got corrupted and you can fix this by windows cd repair or *REFORMAT.
-if the hard disk vibrates but with a clicking sound, your hard disk is already defective and you need to buy a new hard disk (unless you want to repair the hard disk, tuts on ÿôutubê)
-if the hard disk doesn't vibrate at all, try to reconnect its connectors maybe they are just loose and reboot again, if still not vibrating then your hard disk could be dead.
NOTE: always turn your pc OFF and unplug power cord if you are gonna unplug/yank/anything the connectors inside the sytem unit.
next reply will be based on your response, Thanks
*edited
most likely you only have a corrupt windows files due to a recent BAD installation of a BAD program/malware/spyware.
yari ang hard drive ni ts kapag me static ang katawan nya, dapat unlpug from wall plug the push the power botton
to reduce hd burn....just sayin di ako perpekto.
Once uplug from power, try to push power on to remove power from pc for atleast 5 sec. then locate your ram remove ( theres 2 notch both end) push them downward and remove the ram clean the contact points with eraser
and put them back. Restart, you should be good.
yari ang hard drive ni ts kapag me static ang katawan nya, dapat unlpug from wall plug the push the power botton
to reduce hd burn....just sayin di ako perpekto.
Once uplug from power, try to push power on to remove power from pc for atleast 5 sec. then locate your ram remove ( theres 2 notch both end) push them downward and remove the ram clean the contact points with eraser
and put them back. Restart, you should be good.
mawawala na po ang static once he touches the case.
anti-static wrist strap is recommended when dealing with CPUs and Microchips.
no problem with HDDs because its body/frame is connected to the ground
anyway, the idea of my procedure is to check/confirm whether the HDD is running okay or not, which is of coarse significant
Hindi po ram ang problema kasi umaabot siya hanggang sa logo, which means nakaboot siya pero hindi lang nagpush through, as what I said previously maaaring corrupt lang yung files nya pero it is an early sign of HDD failure/papunta na siya sa pagkasira
Yes, hindi aabot ng windows logo kung may problema sa RAM. Malaki chance na corrupted ang windows system files. Pwedeng try nya partion, format, and install uli ng OS. pero paano kung may gsto syang kuning impt files or data sa HDD? Pwede nya try boot from USB flash drive with linux or Falcon Four. then recover nya impt files kung nakikita pa. HTH
Yes, hindi aabot ng windows logo kung may problema sa RAM. Malaki chance na corrupted ang windows system files. Pwedeng try nya partion, format, and install uli ng OS. pero paano kung may gsto syang kuning impt files or data sa HDD? Pwede nya try boot from USB flash drive with linux or Falcon Four. then recover nya impt files kung nakikita pa. HTH
solution:
kuhanin ang HDD at isalpak sa HDD enclosure, irecover ang files sa ibang PC. Ibalik sa System unit matapos marecover ang important files. Reformat.
try these:
1- turn off and unplug wait for 1 minute.
2- open side panel/case where you can touch the hard disk.
3- plug back and turn on while holding/touching the hard disk.
assessment:
-if the hard disk vibrates when you turn the pc on, this means your windows files got corrupted and you can fix this by windows cd repair or *REFORMAT.
-if the hard disk vibrates but with a clicking sound, your hard disk is already defective and you need to buy a new hard disk (unless you want to repair the hard disk, tuts on ÿôutubê)
-if the hard disk doesn't vibrate at all, try to reconnect its connectors maybe they are just loose and reboot again, if still not vibrating then your hard disk could be dead.
NOTE: always turn your pc OFF and unplug power cord if you are gonna unplug/yank/anything the connectors inside the sytem unit.
next reply will be based on your response, Thanks
*edited
most likely you only have a corrupt windows files due to a recent BAD installation of a BAD program/malware/spyware.
magiging external Hdd napo ang itsura after masalpak sa HDD enclosure, okay lang yun. USB naman ang connector
pwede nya nga doon icopy ang files sa PC tapos doon na rin nya i-reformat ang HDD as fat32/ntfs at gawan ng partition (drive C and drive D), sa drive D ilagay ulit ang nacopy na files sa PC. tapos ang drive C ang i-reformat
pumunta po kayo sa pc express website at doon nyo hanapin ang price, MAHAL DOON ibig sabihin hindi ka masho-short sa budget kapag doon mo binase ang price sa kanila. halimbawa may HDD sila na 1 TB = 2K, so sa pamamagitan nyan maaaring ang 350GB ay 400 - 500 pesos lang po.
try mo to tanggalin mo batery unplug din charger hold press ang power 3 to 4 minutes pag ayaw padin try mo alisin isa ram or try mo palitan yung ram pag ganun padin bka sa board na yan