SophiaAlexis
Forum Veteran
- Joined
- Feb 24, 2015
- Posts
- 2,724
- Reaction
- 1,812
- Points
- 822
To overcome such situation, where weak signal is concerned. We can do several things to clear the "way" between the Wimax antenna and the Node so that they can "see" each other. Wimax Technology is still not perfect where a line of sight is needed for an efficient communication between two points. From point A-B and vice versa.
You can do any of the following:
Source:http://globetattoohome.phc.onl/#forbidden#/
You can do any of the following:
- Check the SMA connector if its loose. Tighten the connector to ensure efficient RF energy transfer.
- Reposition the bearing of the antenna. The antenna should be facing the source of RF signal (Node).
- Adjust the elevation of the Wimax antenna so that it will be aligned perfectly in the direction of the RF energy source (Node).
- Relocate the Antenna avoiding being blocked by any object between it and the Node.
- Increase the height of the Wimax Antenna. Additional GI ***** might be needed to do this.
Source:http://globetattoohome.phc.onl/#forbidden#/