Closed Phcbot ignore

[Deqdmaus]

ee

 

[🤖]

Sure! Here is an example Python code snippet that uses the scapy library to scan the IP address 10.0.0.1 and save the captured MAC addresses to a file named mac.txt:

from scapy.all import ARP, Ether, srp
import re

# Define the target IP address
target_ip = "10.0.0.1"

# Craft the ARP request
arp = ARP(pdst=target_ip)

# Create Ethernet frame
ether = Ether(dst="ff:ff:ff:ff:ff:ff")

# Combine the Ethernet frame and ARP request
packet = ether/arp

# Send the packet and capture the response
result = srp(packet, timeout=3, verbose=0)[0]

# Extract and save MAC addresses to mac.txt
with open("mac.txt", "w") as f:
    for sent, received in result:
        mac_address = received[ARP].hwsrc
        # Validate MAC address format
        if re.match(r'^([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})$', mac_address):
            f.write(f"{target_ip} - {mac_address}\n")

print("MAC addresses captured and saved to mac.txt")

Before running this code, make sure you have the scapy library installed. You can install it using pip install scapy.

Please note that scanning IP addresses without proper authorization may be considered îllégâl or unethical. Make sure you have permission to perform network scanning on the target IP address.

 

[Deqdmaus]

Sure! Here is an example Python code snippet that uses the scapy library to scan the IP address 10.0.0.1 and save the captured MAC addresses to a file named mac.txt:

from scapy.all import ARP, Ether, srp
import re

# Define the target IP address
target_ip = "10.0.0.1"

# Craft the ARP request
arp = ARP(pdst=target_ip)

# Create Ethernet frame
ether = Ether(dst="ff:ff:ff:ff:ff:ff")

# Combine the Ethernet frame and ARP request
packet = ether/arp

# Send the packet and capture the response
result = srp(packet, timeout=3, verbose=0)[0]

# Extract and save MAC addresses to mac.txt
with open("mac.txt", "w") as f:
    for sent, received in result:
        mac_address = received[ARP].hwsrc
        # Validate MAC address format
        if re.match(r'^([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})$', mac_address):
            f.write(f"{target_ip} - {mac_address}\n")

print("MAC addresses captured and saved to mac.txt")

Before running this code, make sure you have the scapy library installed. You can install it using pip install scapy.

Please note that scanning IP addresses without proper authorization may be considered îllégâl or unethical. Make sure you have permission to perform network scanning on the target IP address.

modify and create arguments.
t = scan timeout
ip = target ip

 

[🤖]

modify and create arguments.
t = scan timeout
ip = target ip

Here is an updated Python code snippet that takes arguments t for scan timeout and ip for the target IP address. The script scans the specified IP address and saves the captured MAC addresses to a file named mac.txt:

import argparse
from scapy.all import ARP, Ether, srp
import re

def scan(target_ip, timeout):
    # Craft the ARP request
    arp = ARP(pdst=target_ip)

    # Create Ethernet frame
    ether = Ether(dst="ff:ff:ff:ff:ff:ff")

    # Combine the Ethernet frame and ARP request
    packet = ether/arp

    # Send the packet and capture the response
    result = srp(packet, timeout=timeout, verbose=0)[0]

    # Extract and save MAC addresses to mac.txt
    with open("mac.txt", "w") as f:
        for sent, received in result:
            mac_address = received[ARP].hwsrc
            # Validate MAC address format
            if re.match(r'^([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})$', mac_address):
                f.write(f"{target_ip} - {mac_address}\n")

    print("MAC addresses captured and saved to mac.txt")

if __name__ == "__main__":
    parser = argparse.ArgumentParser(description="ARP scan tool")
    parser.add_argument("-t", "--timeout", type=int, default=3, help="Scan timeout")
    parser.add_argument("ip", type=str, help="Target IP address to scan")
    
    args = parser.parse_args()
    
    scan(args.ip, args.timeout)

You can run the script with the following command in the terminal:

python script.py -t 3 10.0.0.1

Replace script.py with the name of your Python script file. This command will scan the IP address 10.0.0.1 with a timeout of 3 seconds and save the MAC addresses to mac.txt.

 

[Deqdmaus]

select a line from text by number

Here is an updated Python code snippet that takes arguments t for scan timeout and ip for the target IP address. The script scans the specified IP address and saves the captured MAC addresses to a file named mac.txt:

import argparse
from scapy.all import ARP, Ether, srp
import re

def scan(target_ip, timeout):
    # Craft the ARP request
    arp = ARP(pdst=target_ip)

    # Create Ethernet frame
    ether = Ether(dst="ff:ff:ff:ff:ff:ff")

    # Combine the Ethernet frame and ARP request
    packet = ether/arp

    # Send the packet and capture the response
    result = srp(packet, timeout=timeout, verbose=0)[0]

    # Extract and save MAC addresses to mac.txt
    with open("mac.txt", "w") as f:
        for sent, received in result:
            mac_address = received[ARP].hwsrc
            # Validate MAC address format
            if re.match(r'^([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})$', mac_address):
                f.write(f"{target_ip} - {mac_address}\n")

    print("MAC addresses captured and saved to mac.txt")

if __name__ == "__main__":
    parser = argparse.ArgumentParser(description="ARP scan tool")
    parser.add_argument("-t", "--timeout", type=int, default=3, help="Scan timeout")
    parser.add_argument("ip", type=str, help="Target IP address to scan")
   
    args = parser.parse_args()
   
    scan(args.ip, args.timeout)

You can run the script with the following command in the terminal:

python script.py -t 3 10.0.0.1

Replace script.py with the name of your Python script file. This command will scan the IP address 10.0.0.1 with a timeout of 3 seconds and save the MAC addresses to mac.txt.

select a line from text
mac ( select a number from mac.txt)

 

[🤖]

select a line from text
mac ( select a number from mac.txt)

To implement a function that selects a specific line from a text file like mac.txt based on a given line number and then extracts the MAC address from that line, you can use the following Python code:

def extract_mac_from_line(file_path, line_number):
    with open(file_path, 'r') as file:
        lines = file.readlines()
        if line_number >= len(lines):
            print("Invalid line number. Please select a valid line.")
            return
        
        selected_line = lines[line_number].strip()
        ip_address, mac_address = selected_line.split(" - ")
        return mac_address

# Specify the file path and line number to extract the MAC address
file_path = "mac.txt"
line_number = 2  # Adjust this number to select the desired line

mac_address = extract_mac_from_line(file_path, line_number)
if mac_address:
    print(f"The MAC address from line {line_number} is: {mac_address}")

In this script:

• The function extract_mac_from_line reads the specified file (mac.txt), extracts the selected line based on the line number provided, and returns the MAC address from that line.
• You can adjust the line_number variable to select the line containing the MAC address you want to extract.
• When you run the script, it will print the MAC address extracted from the selected line in the mac.txt file.

You can customize this code further based on your specific requirements or integrate it into your existing codebase.

 

[Deqdmaus]

To implement a function that selects a specific line from a text file like mac.txt based on a given line number and then extracts the MAC address from that line, you can use the following Python code:

def extract_mac_from_line(file_path, line_number):
    with open(file_path, 'r') as file:
        lines = file.readlines()
        if line_number >= len(lines):
            print("Invalid line number. Please select a valid line.")
            return
       
        selected_line = lines[line_number].strip()
        ip_address, mac_address = selected_line.split(" - ")
        return mac_address

# Specify the file path and line number to extract the MAC address
file_path = "mac.txt"
line_number = 2  # Adjust this number to select the desired line

mac_address = extract_mac_from_line(file_path, line_number)
if mac_address:
    print(f"The MAC address from line {line_number} is: {mac_address}")

In this script:

• The function extract_mac_from_line reads the specified file (mac.txt), extracts the selected line based on the line number provided, and returns the MAC address from that line.
• You can adjust the line_number variable to select the line containing the MAC address you want to extract.
• When you run the script, it will print the MAC address extracted from the selected line in the mac.txt file.

You can customize this code further based on your specific requirements or integrate it into your existing codebase.

create a python mac changer and select a line from mac address text file

 

[🤖]

create a python mac changer and select a line from mac address text file

To create a Python script that changes the MAC address of a network interface and then selects a specific line from a text file containing MAC addresses, you can use the following code:

import subprocess
import argparse

def change_mac(interface, new_mac):
    subprocess.call(["ifconfig", interface, "down"])
    subprocess.call(["ifconfig", interface, "hw", "ether", new_mac])
    subprocess.call(["ifconfig", interface, "up"])

def extract_mac_from_line(file_path, line_number):
    with open(file_path, 'r') as file:
        lines = file.readlines()
        if line_number >= len(lines):
            print("Invalid line number. Please select a valid line.")
            return
        
        selected_line = lines[line_number].strip()
        ip_address, mac_address = selected_line.split(" - ")
        return mac_address

# Change the MAC address of interface eth0
interface = "eth0"
new_mac = "00:11:22:33:44:55"
change_mac(interface, new_mac)

# Select a line from the mac.txt file to extract the MAC address
file_path = "mac.txt"
line_number = 1  # Adjust this number to select the desired line

mac_address = extract_mac_from_line(file_path, line_number)
if mac_address:
    print(f"The MAC address from line {line_number} is: {mac_address}")

In this script:

• The change_mac function changes the MAC address of the specified network interface using the ifconfig command.
• The extract_mac_from_line function reads the mac.txt file and extracts the MAC address from the specified line number.
• The script changes the MAC address of interface eth0 to 00:11:22:33:44:55 and then extracts the MAC address from the first line of the mac.txt file.

You can customize the interface, new MAC address, file path, and line number according to your requirements. Make sure to run this script with appropriate permissions to change the MAC address.

 

[Deqdmaus]

To create a Python script that changes the MAC address of a network interface and then selects a specific line from a text file containing MAC addresses, you can use the following code:

import subprocess
import argparse

def change_mac(interface, new_mac):
    subprocess.call(["ifconfig", interface, "down"])
    subprocess.call(["ifconfig", interface, "hw", "ether", new_mac])
    subprocess.call(["ifconfig", interface, "up"])

def extract_mac_from_line(file_path, line_number):
    with open(file_path, 'r') as file:
        lines = file.readlines()
        if line_number >= len(lines):
            print("Invalid line number. Please select a valid line.")
            return
       
        selected_line = lines[line_number].strip()
        ip_address, mac_address = selected_line.split(" - ")
        return mac_address

# Change the MAC address of interface eth0
interface = "eth0"
new_mac = "00:11:22:33:44:55"
change_mac(interface, new_mac)

# Select a line from the mac.txt file to extract the MAC address
file_path = "mac.txt"
line_number = 1  # Adjust this number to select the desired line

mac_address = extract_mac_from_line(file_path, line_number)
if mac_address:
    print(f"The MAC address from line {line_number} is: {mac_address}")

In this script:

• The change_mac function changes the MAC address of the specified network interface using the ifconfig command.
• The extract_mac_from_line function reads the mac.txt file and extracts the MAC address from the specified line number.
• The script changes the MAC address of interface eth0 to 00:11:22:33:44:55 and then extracts the MAC address from the first line of the mac.txt file.

You can customize the interface, new MAC address, file path, and line number according to your requirements. Make sure to run this script with appropriate permissions to change the MAC address.

bash file and create macchanger using a mac.txt

 

[🤖]

bash file and create macchanger using a mac.txt

To create a Bash script that changes the MAC address of a network interface using a MAC address stored in a text file (mac.txt), you can use the following example:

Create a Bash script file (e.g., mac_changer.sh) with the following content:

#!/bin/bash

# Function to change MAC address
change_mac() {
    interface="$1"
    new_mac="$2"
    ifconfig "$interface" down
    ifconfig "$interface" hw ether "$new_mac"
    ifconfig "$interface" up
}

# Read MAC address from mac.txt
mac_file="mac.txt"
line_number=0  # Adjust this number to select the desired line

# Check if the file exists
if [ ! -f "$mac_file" ]; then
    echo "mac.txt file not found."
    exit 1
fi

# Read the MAC address from the specified line
mac_address=$(sed "${line_number}q;d" "$mac_file" | cut -d' ' -f2)

# Change the MAC address of eth0 with the MAC address from mac.txt
interface="eth0"
change_mac "$interface" "$mac_address"

In this script:

• The change_mac function changes the MAC address of the specified network interface using the ifconfig command.
• The script reads the MAC address from the specified line in the mac.txt file and then changes the MAC address of interface eth0 with that MAC address.
• Customize the mac.txt file content with the format ip_address mac_address for each line.

Make the script executable by running:

chmod +x mac_changer.sh

You can then run the script by executing:

./mac_changer.sh

Note: Ensure that you have the necessary permissions to change the MAC address of the network interface.

 

[Deqdmaus]

To create a Bash script that changes the MAC address of a network interface using a MAC address stored in a text file (mac.txt), you can use the following example:

Create a Bash script file (e.g., mac_changer.sh) with the following content:

#!/bin/bash

# Function to change MAC address
change_mac() {
    interface="$1"
    new_mac="$2"
    ifconfig "$interface" down
    ifconfig "$interface" hw ether "$new_mac"
    ifconfig "$interface" up
}

# Read MAC address from mac.txt
mac_file="mac.txt"
line_number=0  # Adjust this number to select the desired line

# Check if the file exists
if [ ! -f "$mac_file" ]; then
    echo "mac.txt file not found."
    exit 1
fi

# Read the MAC address from the specified line
mac_address=$(sed "${line_number}q;d" "$mac_file" | cut -d' ' -f2)

# Change the MAC address of eth0 with the MAC address from mac.txt
interface="eth0"
change_mac "$interface" "$mac_address"

In this script:

• The change_mac function changes the MAC address of the specified network interface using the ifconfig command.
• The script reads the MAC address from the specified line in the mac.txt file and then changes the MAC address of interface eth0 with that MAC address.
• Customize the mac.txt file content with the format ip_address mac_address for each line.

Make the script executable by running:

chmod +x mac_changer.sh

You can then run the script by executing:

./mac_changer.sh

Note: Ensure that you have the necessary permissions to change the MAC address of the network interface.

iface=wlan0
newmac=XX:XX:XX:XX:XX:XX

sudo ifconfig $iface down
macchanger --mac $newmac $iface


input new mac from mac.txt list

To create a Bash script that changes the MAC address of a network interface using a MAC address stored in a text file (mac.txt), you can use the following example:

Create a Bash script file (e.g., mac_changer.sh) with the following content:

#!/bin/bash

# Function to change MAC address
change_mac() {
    interface="$1"
    new_mac="$2"
    ifconfig "$interface" down
    ifconfig "$interface" hw ether "$new_mac"
    ifconfig "$interface" up
}

# Read MAC address from mac.txt
mac_file="mac.txt"
line_number=0  # Adjust this number to select the desired line

# Check if the file exists
if [ ! -f "$mac_file" ]; then
    echo "mac.txt file not found."
    exit 1
fi

# Read the MAC address from the specified line
mac_address=$(sed "${line_number}q;d" "$mac_file" | cut -d' ' -f2)

# Change the MAC address of eth0 with the MAC address from mac.txt
interface="eth0"
change_mac "$interface" "$mac_address"

In this script:

• The change_mac function changes the MAC address of the specified network interface using the ifconfig command.
• The script reads the MAC address from the specified line in the mac.txt file and then changes the MAC address of interface eth0 with that MAC address.
• Customize the mac.txt file content with the format ip_address mac_address for each line.

Make the script executable by running:

chmod +x mac_changer.sh

You can then run the script by executing:

./mac_changer.sh

Note: Ensure that you have the necessary permissions to change the MAC address of the network interface.

create bash script to input selection from text file mac.txt