At anong components ang gagamitin para maging 12v ang 18 to 20 v na tranpormer output. Dko kasi alam kong ilang amper tong transpormer na ito kasi malaki din ito..
Sana may mka tolong sakin ..impor tanti lang kasi to para sa project namn
Kung hindi naman ganun kalaki power requirements, puede rin ito..
The resisitor under the LM317T is 240 Ohms, The resistor that is going to ground is 2K OHM, The Cap to the right is 47uf 35v, And the cap next to the diodes (bridge) is 4700uf 35v. Use 1N4001 rectifier diodes.
LM317T specs:
3 pin TO220 package
DC out 1.2v - 37v [adjustable]
1.5 ampere rating
Gamit ka lang breadboard PCB puede na yan, throughole 1 sided lang para sa small circuit kagaya niyan.
Kung hindi naman ganun kalaki power requirements, puede rin ito..
The resisitor under the LM317T is 240 Ohms, The resistor that is going to ground is 2K OHM, The Cap to the right is 47uf 35v, And the cap next to the diodes (bridge) is 4700uf 35v. Use 1N4001 rectifier diodes.
LM317T specs:
3 pin TO220 package
DC out 1.2v - 37v [adjustable]
1.5 ampere rating
Gamit ka lang breadboard PCB puede na yan, throughole 1 sided lang para sa small circuit kagaya niyan.
Kung hindi naman ganun kalaki power requirements, puede rin ito..
The resisitor under the LM317T is 240 Ohms, The resistor that is going to ground is 2K OHM, The Cap to the right is 47uf 35v, And the cap next to the diodes (bridge) is 4700uf 35v. Use 1N4001 rectifier diodes.
LM317T specs:
3 pin TO220 package
DC out 1.2v - 37v [adjustable]
1.5 ampere rating
Gamit ka lang breadboard PCB puede na yan, throughole 1 sided lang para sa small circuit kagaya niyan.
Basic lang yan boss.
eto lang mga kaylangan mo!
~4Pcs 2amp diode
~10-15k ohms na Resistor
~Electrolytic Capacitor with capacitance of 25v and 3000 microfarad.
~LED indicator with 3-5k resistor
~switch (optional)
~fuse (optional)
.
Pero pwede rin dalawa ang output voltage na 12v-18v gamit ka potentiometer. CreepyTricks
Basic lang yan boss.
eto lang mga kaylangan mo!
~4Pcs 2amp diode
~10-15k ohms na Resistor
~Electrolytic Capacitor with capacitance of 25v and 3000 microfarad.
~LED indicator with 3-5k resistor
~switch (optional)
~fuse (optional)
.
Pero pwede rin dalawa ang output voltage na 12v-18v gamit ka potentiometer. CreepyTricks
iba kasi ang hot sa amin boss primary line yan at cold naman ang secondary line pag sa tv. naman dalawang klase ang HOT primary line , and horizontal output transformer