Mga sir pantulong nman po gumamit po ako ng sp flash tool sa cp ko napindot ko po yung format nawala po yung screen tpos pag binubuhay Nag vvibrate lang siya anu kaya makaka tulong d2 pero na dedetec pa siya ng sp flash tool salamat po sa makaka tulong
hanap ka nang firmware para sa phone mo at iflash mo sa sp flash tool madali lang yan hanap ka lang nang tutorial dito or kahit saang site or sa google lang
need mo mag download sir ng stockrom nyan sir dahil naformat mo yan kelangan mo din ng mtkdroidtools at rooter para sa imei rebuild nyan pakidetalye lang po ang modelo ng unit nyo
marereflash mo pa rin yan sir dahil madedetect pa rin ng computer yan nareformat mo kasi ang whole system nyan kaya expect mo na deadboot na yan ang gawin nyo na lang po magdownload ka ng stock rom then kapag nadownload nyo na poat naextract mo open mo na po ang spflashtool then select the scatterfile sa download mode then click download tapos remove mo yung battery ng unit nyo po insert mo usb cable sa pc connect mo yung unit without battery pag nag appear yung red tab sa baba ng spt insert mo nyo ang battery then mag iiba na kulay nyan wait nyo na lang po gang matapos...
kindly post na lang po kung ano resulta
download mo exact firmware ng unit mo dito You do not have permission to view the full content of this post.Log in or register now.
pagkatapos download extract then proceed flashing gamit yang sp flash tool mo, pag di mo kaya gawin dalhin mo sa malapit na repair shop sa area nyo para yung tech ang gagawa ng unit mo wag nga pala kalimutan mag dala ng pambayad. =))
download mo exact firmware ng unit mo dito You do not have permission to view the full content of this post.Log in or register now.
pagkatapos download extract then proceed flashing gamit yang sp flash tool mo, pag di mo kaya gawin dalhin mo sa malapit na repair shop sa area nyo para yung tech ang gagawa ng unit mo wag nga pala kalimutan mag dala ng pambayad. =))
minimum ko sa pagrereflash 350 depende sa unit kaya ts kung ayaw mo ma mind twist pagawa mo sa tech pero kung ayaw mo magbayad at gusto mo matutong iflash yang unit mo kelangan mo magtiyaga walang masama kung susubukan total nabrick mo na ang unit mo meron ka nang hands on para matuto
download mo to at install mo sa unit mo.. required kasi na rooted ang unit You do not have permission to view the full content of this post.Log in or register now.
Go to Engineer mode in mobile Uncle tool
Select Engineer mode[MTK]
Go to CDS information
Select Radio Information
Here you can see Phone1 and Phone2, in that select phone2, because most of the Chinese clone phone the 1st Sim which is a 3G will work perfectly. Only the problem happens when we insert the second sim. If you check you can see the IMEI of 1st sim will start with 35xxxxx and the 2nd will start with 88xxxxxxxx. That is why the second sim is not able to register to the network, because its not in international formatted IMEI. So usually we need to change the IMEI of phone 2.
Select the phone 2
Here you can see a command line with “AT+”. Now just add this command to it AT+EGMR=1,10,”15 digit YOUR NEW IMEI NO” And press “send at command” button.
[ if you want to change the the phone 1 IMEI AT+EGMR=1,7,”NEW IMEI NO”]