Paano po mag-downgrade ng PLDT Evoluzn FX ID4? Alam ko na gawin paano pumunta sa advance setting ngunit gusto ko sana ay idowngrade iyong firmware version ng sakin, currently nsa v1.2.0 po kasi, baka may tut. kayo dyan at firmware file thank you!
But I haven't tried downgrading so I can't guarantee that this will work under v1.2.0.4. If you have advanced settings page access then you know where to upload this.
But I haven't tried downgrading so I can't guarantee that this will work under v1.2.0.4. If you have advanced settings page access then you know where to upload this.
It should be enabled automatically when connected, unless purposefully disabled by the firmware. Maybe your antenna is not supported? How will you know? Get a multimeter and set it for line continuity. Test the two poles of one of the connectors of the antenna and if it registers as any number other than zero or it beeps then it is continuous and the antenna is supported.
On my OpenWrt firmware there is Antenna Management for this unit. It can be enabled or disabled at will.
It should be enabled automatically when connected, unless purposefully disabled by the firmware. Maybe your antenna is not supported? How will you know? Get a multimeter and set it for line continuity. Test the two poles of one of the connectors of the antenna and if it registers as any number other than zero or it beeps then it is continuous and the antenna is supported.
On my OpenWrt firmware there is Antenna Management for this unit. It can be enabled or disabled at will.