How To Flash Firmware Using Pad Product Tool
1.Download and Extract all files in a Folder in Desktop
2.Now,Install Pad Product Tool 1.05. The driver is already included in the Pad Product Tool, so it will automatically install the driver for your device.
4.The first time you launch it it will look for the ".fw" extension. Just look inside the firmware folder, or which folder you extracted the firmware.
5. After loading the file just click on replace button.
6.Now,manually add the system.img, rec.img, system.img (As shown in the image)
7.Now,Connect your tablet while pressing Volume Down or Volume Up.When successful connected,1 USB Device Detected will appear in the left side and down will highlight.
8.Now,Click on Down and wait until flashing complete.
Remindero not exit the PAD Product Tool when it is flashing. This might brick your tablet.
How To Flash Firmware Using Pad Product Tool
1.Download and Extract all files in a Folder in Desktop
2.Now,Install Pad Product Tool 1.05. The driver is already included in the Pad Product Tool, so it will automatically install the driver for your device.
4.The first time you launch it it will look for the ".fw" extension. Just look inside the firmware folder, or which folder you extracted the firmware.
5. After loading the file just click on replace button.
6.Now,manually add the system.img, rec.img, system.img (As shown in the image)
7.Now,Connect your tablet while pressing Volume Down or Volume Up.When successful connected,1 USB Device Detected will appear in the left side and down will highlight.
8.Now,Click on Down and wait until flashing complete.
Remindero not exit the PAD Product Tool when it is flashing. This might brick your tablet.
iphone 5s touch not working .kaya try ko reheat touch ic pero wala try ako replace touch ic gumana pero pag tagal tagal nga nga balik ulit sa dati.
iphone 6 always searching try ko imei blanko try ko tignan yung modem firmware blanko din baseband ic ang may tama kaya try ako baseband ic ng iba nga nga di puwede kaya try ko ulit yung dati may mga lifted line pala sa board yung pinapatungan ng baseband ic kaya trace ako linya.
iphone 5s touch not working .kaya try ko reheat touch ic pero wala try ako replace touch ic gumana pero pag tagal tagal nga nga balik ulit sa dati.
iphone 6 always searching try ko imei blanko try ko tignan yung modem firmware blanko din baseband ic ang may tama kaya try ako baseband ic ng iba nga nga di puwede kaya try ko ulit yung dati may mga lifted line pala sa board yung pinapatungan ng baseband ic kaya trace ako linya.
How To Flash Firmware Using Pad Product Tool
1.Download and Extract all files in a Folder in Desktop
2.Now,Install Pad Product Tool 1.05. The driver is already included in the Pad Product Tool, so it will automatically install the driver for your device.
4.The first time you launch it it will look for the ".fw" extension. Just look inside the firmware folder, or which folder you extracted the firmware.
5. After loading the file just click on replace button.
6.Now,manually add the system.img, rec.img, system.img (As shown in the image)
7.Now,Connect your tablet while pressing Volume Down or Volume Up.When successful connected,1 USB Device Detected will appear in the left side and down will highlight.
8.Now,Click on Down and wait until flashing complete.
Remindero not exit the PAD Product Tool when it is flashing. This might brick your tablet.