alixcabagnot
Honorary Poster
- Joined
- Dec 14, 2018
- Posts
- 185
- Reaction
- 337
- Points
- 164
"How to trace ip address using
Messenger"
First you got to find out the IP address of
that User.
To Do so we will be using “netstat” command
in windows. If you want to know the IP
address of a specific person on
facebook or orkut or any chat service, there is
only one way: Just invite or ping him for a
chat and while chat is ON open
‘Command Prompt‘ on your PC (Start
>Run>cmd).
note: before trying this make sure you close
all the other tabs in your browser, and only
keep facebook open. Also if
possible delete all the history and cache from
your browser.
When command prompt opens Type the
following command and hit Enter.
netstat -an
And you will get all established connections
IP addresses there. Note down all the
suspicious IP’s.
The Next Step is to Trace that user using his
IP address.
To do so we will be using IP tracer service.
Go to the below address and paste the IP
address in the box that says
“lookup this ip or website”, and it will show
you the location of the user.
You do not have permission to view the full content of this post. Log in or register now.
ion/
It will show you all the information about that
user along with his ISP and a Location in the
MAP. Now in the MAP Just
click on “click for big ip address location” in
the big picture you can actually zoom in. and
try to recognize the area. If
any serious matter just note down the ISP
details in that page and contact them about
the IP. They will respond you.
Other netstat commands:
-a Displays all connections and listening
ports.
-e Displays Ethernet statistics. This may be
combined with the -s option.
-n Displays addresses and port numbers in
numerical form.
-p Proto Shows connections for the protocol
specified by proto; proto may be TCP or UDP.
-s Option to display per-protocol statistics,
proto may be TCP, UDP, or IP.
-r Displays the routing table.
-s Displays per-protocol statistics. By
default, statistics are shown for TCP, UDP
and IP; the
-p Option may be used to specify a subset of
the default.
Messenger"
First you got to find out the IP address of
that User.
To Do so we will be using “netstat” command
in windows. If you want to know the IP
address of a specific person on
facebook or orkut or any chat service, there is
only one way: Just invite or ping him for a
chat and while chat is ON open
‘Command Prompt‘ on your PC (Start
>Run>cmd).
note: before trying this make sure you close
all the other tabs in your browser, and only
keep facebook open. Also if
possible delete all the history and cache from
your browser.
When command prompt opens Type the
following command and hit Enter.
netstat -an
And you will get all established connections
IP addresses there. Note down all the
suspicious IP’s.
The Next Step is to Trace that user using his
IP address.
To do so we will be using IP tracer service.
Go to the below address and paste the IP
address in the box that says
“lookup this ip or website”, and it will show
you the location of the user.
You do not have permission to view the full content of this post. Log in or register now.
ion/
It will show you all the information about that
user along with his ISP and a Location in the
MAP. Now in the MAP Just
click on “click for big ip address location” in
the big picture you can actually zoom in. and
try to recognize the area. If
any serious matter just note down the ISP
details in that page and contact them about
the IP. They will respond you.
Other netstat commands:
-a Displays all connections and listening
ports.
-e Displays Ethernet statistics. This may be
combined with the -s option.
-n Displays addresses and port numbers in
numerical form.
-p Proto Shows connections for the protocol
specified by proto; proto may be TCP or UDP.
-s Option to display per-protocol statistics,
proto may be TCP, UDP, or IP.
-r Displays the routing table.
-s Displays per-protocol statistics. By
default, statistics are shown for TCP, UDP
and IP; the
-p Option may be used to specify a subset of
the default.