Closed ZTE MF283+ OpenWRT [solved]

[Ayase Idaichi]

Sino na nakapagpagana ng openwrt dito for ZTE MF283+

i followed the tutorial directly to the contrib's commit msg in openwrt git: You do not have permission to view the full content of this post. Log in or register now.

Ginamit ko yung latest stable ver nila ng sysupgrade.bin: You do not have permission to view the full content of this post. Log in or register now.

[solved] solution read here: Closed - ZTE MF283+ OpenWRT [solved]

 

[Titanpen]

baka naka static ip kapa??

 

[Ayase Idaichi]

baka naka static ip kapa??

niremove ko na after ng flash
also inunplug then plinug ko uli sa LAN, para makasigurado ako.

 

[Titanpen]

kung stuck boot kasi wala ka dapat dhcp ip diba. try mo sa incognito i open yung luci

 

[Jambokill]

Is it blinking blue or just blue lang?
Also check mo, i plug mo laptop mo or pc sa device, then check mo if nag bibigay siya ng IP, if mag bigay ibig sabihin niyan gumagana yung dhcp server niya.

 

[Ayase Idaichi]

Is it blinking blue or just blue lang?
Also check mo, i plug mo laptop mo or pc sa device, then check mo if nag bibigay siya ng IP, if mag bigay ibig sabihin niyan gumagana yung dhcp server niya.

Blue lang sya, nakaconnect sya through LAN, after flash nakaremove na yung static ip nya(back to default), triny ko mag ipconfig /all after 10min mark(which is estimated time daw na matatapos yung first boot) pero walang lumalabas na 192.168.x.x something na ip.

Possible kaya na bug yung openwrt firmware na dinownload ko? tatry ko mamaya or bukas magredownload & flash uli using 22.03 rc6 version, update ko nalang yung thread kung may gagana sya or hindi rin.

 

[joker09]

Ako natry ko na pati Lte connection, working lahat except MCN Dual Band. Yun lang. Mahina din yong wifi nya, napuputol ang connection pero sa feature solid sya

 

[Ayase Idaichi]

Ako natry ko na pati Lte connection, working lahat except MCN Dual Band. Yun lang. Mahina din yong wifi nya, napuputol ang connection pero sa feature solid sya

Anong indication na success yung flash pwede matanong? Paano behavior ng led light and ano ip address na gagamitin ko para ma access yung luci web dashboard?

 

[joker09]

Anong indication na success yung flash pwede matanong? Paano behavior ng led light and ano ip address na gagamitin ko para ma access yung luci web dashboard?

1st boot, Power Led. A few minutes, Blinking Signal Led (Green) then if Signal Led (Blue) it was all ready to use.

 

[Titanpen]

reflash kana lang ibang version. wala sakit sa ulo

 

[rapain]

naka pag flash ako nyan tested ko sya working same firmware din stable 22.03 recovery flashing tftpd
dapat patience ka lang mag full bootup sya walang interruption dapat hangang mag ilaw lahat mga led indicators...

kaso hindi supported ang lte o may kulang na ρá†ch files add ons siguro naging simpling router lang sya walng lte menu sa LUCI dashboard no internet
hindi na ako nag research ulit sa kulang para mag work ang LTE
kaya nag back to globe stock ulit ako at working ulit..

 

[Ayase Idaichi]

naka pag flash ako nyan tested ko sya working same firmware din stable 22.03 recovery flashing tftpd
dapat patience ka lang mag full bootup sya walang interruption dapat hangang mag ilaw lahat mga led indicators...

kaso hindi supported ang lte o may kulang na ρá†ch files add ons siguro naging simpling router lang sya walng lte menu sa LUCI dashboard no internet
hindi na ako nag research ulit sa kulang para mag work ang LTE
kaya nag back to globe stock ulit ako at working ulit..

Thanks sa insights, yes inantay ko talaga yung bootup kahit lagpas 10min na, pero wala ako narereceive na 192.168.x.x ip sa ipconfig and hindi ko rin ma-access si LuCi dashboard nung time na yun

 

[rapain]

Thanks sa insights, yes inantay ko talaga yung bootup kahit lagpas 10min na, pero wala ako narereceive na 192.168.x.x ip sa ipconfig and hindi ko rin ma-access si LuCi dashboard nung time na yun

unbrick mo na lang backto globe stock firmware by tftpd recovery

 

[Ayase Idaichi]

unbrick mo na lang backto globe stock firmware by tftpd recovery

gamit ko kasi yung debranded firmware ni jhowel yung v1.0.0B12 since openline naman na yung pci ng modem ko.

may kopya ka nung globe stock firmware? pahingi ako kung meron ka

 

[rapain]

gamit ko kasi yung debranded firmware ni jhowel yung v1.0.0B12 since openline naman na yung pci ng modem ko.

may kopya ka nung globe stock firmware? pahingi ako kung meron ka

mf283+ globe stock You do not have permission to view the full content of this post. Log in or register now.

 

[Ayase Idaichi]

mf283+ globe stock You do not have permission to view the full content of this post. Log in or register now.

thanks, ano password ng archive?

 

[rapain]

thanks, ano password ng archive?

pass: mf283+_ghandz

flash your own risk paps..

 

[Ayase Idaichi]

pass: mf283+_ghandz

flash your own risk paps..

ok ok thanks

 

[joker09]

naka pag flash ako nyan tested ko sya working same firmware din stable 22.03 recovery flashing tftpd
dapat patience ka lang mag full bootup sya walang interruption dapat hangang mag ilaw lahat mga led indicators...

kaso hindi supported ang lte o may kulang na ρá†ch files add ons siguro naging simpling router lang sya walng lte menu sa LUCI dashboard no internet
hindi na ako nag research ulit sa kulang para mag work ang LTE
kaya nag back to globe stock ulit ako at working ulit..

Sakin nagwork ang lte using uqmi at ncm pero globe lang.

+ Add config within the network/config directory

 

[rapain]

Sakin nagwork ang lte using uqmi at ncm pero globe lang.

+ Add config within the network/config directory

Kahit openline na sya globe lang? Pa link ng Config paps