Help Windows 10 update loop on deep freeze

[darwin333]

Mga lods pahelp nman yung pc ko kasi bigla na lng nagupdate nung in on ko na yung deep freeze ngayon po paulit ulit na lng po siya naguupdate hanggang 30 percent tapos magrerestart paulit ulit na lng po di na natatapos ang update.

 

[system corrupt]

try booting into safe mode. may startup command yun para mag boot sa safe mode. saka mo i deactivate yung deep freeze mo.

 

[darwin333]

try booting into safe mode. may startup command yun para mag boot sa safe mode. saka mo i deactivate yung deep freeze mo.

Paano po kaya yung start up command windows 10 po

 

[system corrupt]

Paano po kaya yung start up command windows 10 po

check mo sa google. depende yan sa unit mo, kung laptop or desktop.

How to boot into Windows 10 safe mode from a blank screen​

If your PC is in a bad state, and you can’t even get beyond a blank screen (or it’s completely crashed) you still have a way to get to safe mode.

1. Hold down the power button for 10 seconds. Located the physical power button on your device, and hold it down for a period of 10 seconds.
2. Press the power button. After the device has fully powered down, press the power button again.
3. When your device powers up immediately hold the power button for 10 seconds again. The second you have an indication that your device is powering up, for example, some devices will show a manufacturing logo upon booting up, hold the power button for 10 seconds ago which will switch your device off.
4. Repeat steps 2 and 3 a second time. Once again turn on your device and the minute it starts to wake up, hold the power button for 10 seconds to switch it off.
5. Press the power button again, this time allowing your device to fully restart. After doing steps 2 and 3 twice, this time when you hit the power button you want to let your device fully power up. You should now enter what is known as the Windows Recovery Environment (winRE).
6. Select Troubleshoot.
7. Select Advanced options.
8. Select Startup Settings.
9. Select Restart. After your device powers up, you’ll see a ‘Choose an option’ menu, follow these steps, first hit Troubleshoot, then Advanced options, then startup settings, and finally restart. Afterward, your device will restart.
10. Press F4 at the Startup Settings menu. After your device restarts, you’ll have a list of options in front of you. You want to select number 4, by pressing F4, this will boot you into safe mode. Or you can press F5 to boot into safe mode with networking capabilities.

 

[darwin333]

check mo sa google. depende yan sa unit mo, kung laptop or desktop.

View attachment 2092861

How to boot into Windows 10 safe mode from a blank screen​

If your PC is in a bad state, and you can’t even get beyond a blank screen (or it’s completely crashed) you still have a way to get to safe mode.

1. Hold down the power button for 10 seconds. Located the physical power button on your device, and hold it down for a period of 10 seconds.
2. Press the power button. After the device has fully powered down, press the power button again.
3. When your device powers up immediately hold the power button for 10 seconds again. The second you have an indication that your device is powering up, for example, some devices will show a manufacturing logo upon booting up, hold the power button for 10 seconds ago which will switch your device off.
4. Repeat steps 2 and 3 a second time. Once again turn on your device and the minute it starts to wake up, hold the power button for 10 seconds to switch it off.
5. Press the power button again, this time allowing your device to fully restart. After doing steps 2 and 3 twice, this time when you hit the power button you want to let your device fully power up. You should now enter what is known as the Windows Recovery Environment (winRE).
6. Select Troubleshoot.
7. Select Advanced options.
8. Select Startup Settings.
9. Select Restart. After your device powers up, you’ll see a ‘Choose an option’ menu, follow these steps, first hit Troubleshoot, then Advanced options, then startup settings, and finally restart. Afterward, your device will restart.
10. Press F4 at the Startup Settings menu. After your device restarts, you’ll have a list of options in front of you. You want to select number 4, by pressing F4, this will boot you into safe mode. Or you can press F5 to boot into safe mode with networking capabilities.

ginawa ko na to lods kaya lang di siguro gumana dahil hnd lumalabas yung windows logo direkta na agad siya sa update eh

sa ganitong loading pinapatay ko na kaagad kasi di tlga lumalabas yung logo direkta na siya sa update