What's new

Wimax bm622, bm625, bm621 häçk, change mac, tune-ups, tweaks & tricks

racky

Established
Joined
Jun 26, 2013
Posts
199
Reaction
2,311
Age
23
Exactly a year since I've been a member of phcorner thinking I should give back some of what I've learned.

I've noticed that a lot are still at lost about mac changing and stuffs so I've compiled my knowledge (from Symbianize) and experience about the ever-so-popular bm622 (same to bm621 and bm625) thought it might be useful for beginners and intermediate level users alike.
I'll try my best to be as straightforward as possible.
(This will not work for 2011-2013 version and BM622i or BM622m)

Assuming your Wimax is all set (power, cable connections, external antenna, signals etc)

Lets begin to jump start your Wimax!


Quote:


#Summary
-- copy your wan mac
-- paste it to sniper
-- use the generated live macs
-- enjoy free internet
got it? if not then follow the long version below.

==============================================
==============================================
Quote:
#Change MAC (Beginner level)

MAC address changing - is use to acquire free internet, its very easy and simple to learn.

*First Step
-In able to successfully change our mac we need our telnet to be activated.

*Test and Activate your Telnet


Press ---> window+R
Type ---> cmd
Type ---> telnet 192.168.1.1

If you're able to enter the login phase then your telnet is activated if not then do the following for Win7:

---> Start
---> Control Panel
---> Programs
---> Programs And Features
---> Turn Windows features on or off
---> Check Telnet Client
---> Hit OK
http://img705.imageshäçk.us/img705/4189/telnetgif.gif

Now if all are set then we need a working MAC, follow this steps to get yours:

Download and Run "Wimax Tool" by syntaxerror00100 here:
You do not have permission to view the full content of this post. Log in or register now.
(Don't forget to say thanks to him.)
then go back here

Important:
From now onwards you must use your Wimax as your main ISP, disconnect any other sources of internet connections and don't use routers or proxies for now.

Procedure #1:
In your browser type ---> 192.168.1.1
Username ----> user
Password ----> user
http://img195.imageshäçk.us/img195/9038/57991868.gif

Highlight "WAN MAC Address value"
Press CTRL+C
http://img337.imageshäçk.us/img337/9575/76181484.gif


Then switch back to "Wimax Tool"
Click ---> "MAC Sniper" tab
Click in ---> "Mac address" box
Press ---> CTRL+V
Select "Random"
Select at least 20 "Tries"
Then hit "Run"
http://img525.imageshäçk.us/img525/8973/71685070.gif
(It will take a while about 40mins or so, so you might wanna do some other stuff.)


After "Wimax Tool" finishes its job, test if you're already connected to the internet if not then follow through:

Still in "Wimax Tool"
Click ---> "Macs management" tab
Select "View MAC's from mac sniper[ALIVE]"
http://img402.imageshäçk.us/img402/3720/96163883.gif

Right Click on any MAC you like
Then select "Use this mac or Test" and wait for modem to reboot.
http://img256.imageshäçk.us/img256/7012/71496116.gif


#Congratulations you're now connected to the world for FREE with no added pain in the a** monthly bill.
(Please don't ever beg for MACs, we already have the tool and by tool I mean brain.)
Tip: Using your own MAC series is recommended for safety precaution.
MAC series examples:
10:C6:1F:XX:XX, 20:2B:C1:XX:XX, 64:16:F0:XX:XX (where X is a corresponding value)

*Want to change your mac the traditional way?
then go here ---> You do not have permission to view the full content of this post. Log in or register now.
You still need a working mac for it to work.

==============================================
==============================================
Quote:
#Frequency Tune-Up (Intermediate level)

So you're already connected to the Internet but having unstable connection? then just follow along..

There are many factors regarding our Wimax's stability but the common are signal, frequency and the MAC itself.

MAC - if other users uses the same MAC as you, frequent disconnections etc.
Signal - We need the strongest signal possible, using external antenna might work.
Frequencies - Every area differs stable frequencies, so you might need to do "The process of elimination."

To stabilize our connection we need to tune-up our frequencies.

First we need to access our modem with Administrator right.
Follow the steps in Procedure #1 up to the "Then switch back to "Wimax Tool"
Then
Click ---> "Pass generator" tab
Click in ---> "Input mac" box
Press ---> CTRL+V
Then Click "Generate password"
Copy the generated password
http://img267.imageshäçk.us/img267/7347/37144424.gif

Switch back to your browser type 192.168.1.1
Username ---> admin
Password ---> paste your generated password from "Wimax tool"

In your wimax GUI:
Click ---> WiMAX tab
Click ---> Scanset
Now take note of all the Frequencies listed as we're gonna test each one of them.
This image has been resized. Click this bar to view the full image. The original image is sized 877x513.
http://img580.imageshäçk.us/img580/1203/59804734.gif

Isolate one frequency you want to test then delete everything else.
Click ---> "Apply"
Download any torrent or IDM files, observe which frequency will perform best, repeat isolation procedure until you're satisfy.


Tip: If for example the most stable frequency in your area is 2612000 then that's the only frequency you'll ever need within your area.

Quote:
*Enable Wimax's built in Signal Booster

Press ---> window+R
Type ---> cmd
Type ---> telnet 192.168.1.1
Login ---> wimax
Password ---> wimax820
Type ---> set wimax-sniffer on
Type ---> board reboot

..Credits to Jailbreak


==============================================
==============================================
Quote:
#Config Tweaks (Advance level) Definitely NOT recommended for beginners.

Config Tweaking
-To avoid blank WAN cause by other users.
-Prevents your MAC from being stolen.
-Ease of use, say bye bye to Password generators.
-Theoretically blocks the FWD (Firmware Destroyer)
Tweaking your modem's config is dangerous and risky, it might render your modem useless or brick it so proceed with caution.
Continuing through this process means that you're willing to take the risk and possibly suffer the consequence of bricking your modem.
Do at your own risk!

Lets start..
Login to your modem's GUI as admin
Go to "Maintain" ---> "Device" ---> "Advance"
Then click "Download Default Configuration File"
and Save it..
Copy your downloaded config to another location to make a back-up (for safety issues)

Now open Wordpad
Open the downloadcarconfigfile

#Telnet Login
Press CTRL+F
Type ---> "telnetpassword" then press Enter
close the "Find" dialog box
then follow the screenshot:
This image has been resized. Click this bar to view the full image. The original image is sized 837x250.
http://img13.imageshäçk.us/img13/4655/telneth.jpg


#ACL-WAN protection
Next Press CTRL+F
Type ---> "telnetwanenable" then press Enter (twice)
close the "Find" dialog box
follow the screenshot:
This image has been resized. Click this bar to view the full image. The original image is sized 775x232.
http://img689.imageshäçk.us/img689/1578/aclr.jpg

#GUI login
Next Press CTRL+F
Type ---> "userpassword"
close the "Find" dialog box
follow the screenshot:
This image has been resized. Click this bar to view the full image. The original image is sized 790x268.
http://img411.imageshäçk.us/img411/4052/gui2.jpg

Then save it and re-upload it back to your modem's config then reboot your modem and we're done!



btw you can also opt for the software protection from lavaboy or syntaxerror00100 to escape the fuzz but the downside is you won't be able to scan for MACs while its active.

lavaboy's
---> You do not have permission to view the full content of this post. Log in or register now.
syntaxerror00100's
---> You do not have permission to view the full content of this post. Log in or register now.
Any will do, its just a matter of personal preference.

*Other known ways to prevent FWD (Firmware Destroyer)
-Get a good antivirus, Avast free will do.
-Be like a legit, when changing MAC change the serial number that corresponds to the MAC as well.

*In a suspected case of FWD
When you wake up after you left your modem on overnight and all you see is a LAN LED:
-Try to do restore default via GUI or telnet cmd prompt.
-or push the "hard reset button" using a pin or any other appropriate material.
-Never turn your modem off as you'll be likely complete the process of their firmware "destroyer" update.

Quote:
*Hardware protection (Fool-proof anti FWD)
If you have knowledge in hardware or just brave enough then you can try this tutorials for making your own modem's hardware protection:

puliskalawakan's thread
---> You do not have permission to view the full content of this post. Log in or register now.
or
tagok587's thread
---> You do not have permission to view the full content of this post. Log in or register now.

If not then let lavaboy do it for you
---> You do not have permission to view the full content of this post. Log in or register now.
BM625 blank WAN solution

go here ---> You do not have permission to view the full content of this post. Log in or register now.

BM622 2011 version password generator
go here ---> You do not have permission to view the full content of this post. Log in or register now.

more tweaks to follow..

Please DON'T quote this post.


You do not have permission to view the full content of this post. Log in or register now.
--------------------------------------------------------------------
You do not have permission to view the full content of this post. Log in or register now.
 

sharlotte

Leecher
https://phcorner.net/showthread.php?t=655695 <b>this link is not working po..sir pkisend n lng po ung generator or tools para ma-try ko din po ito, kung pde...</b>

If you're able to enter the login phase then your telnet is activated if not then do the following for Win7:
---> Start
---> Control Panel
---> Programs
---> Programs And Features
---> Turn Windows features on or off
---> Check Telnet Client
---> Hit OK

ayaw pong maactivate nung telnet client ...nuh pong pdeng ibang gwin to activate my telnet client?

thanks po
 

uchihavane

Enthusiast
kap ask lang mukhang na blank wan ang bm622 ko.. dko kasi ma access ang admin.ok na yung telnet at ung gui walang details yung sa wan diko na alam ang gagawin wala pa nman akong budget magpa repair.na try ko na yung ibang tut sa kabila pero wala parin.nkapag change mac nako wla parin...help naman thanks
 

kiddrock

Leecher
mga tol, patulong nman dyan, d kuna ma access ung admin password dahil sa maling upload ng config file. May idea po ba kayo kung paano to ma access ang admin...tnx..
 

PinkBlind

Leecher
Hi po, Sana po may makatulong sa akin dito sa Wimax bm622 problem ko. Last year ko to last nagamit kasi nakatay na ata ung old mac ko na gamit. Mula naman nun di na ako ng hanap ng new mac, nabili lang kasi namin sa friend ng bro ko. Pano po ba paganahin ulit ung bm622 ko? Yung link mo ng wimax tool dito not working na po. Try ko sana *sigh*. Marami naman ako nabasa about sa bm622 na mga tut pero nakakalito para sa akin na newbie ako kung pano mag hanap ng mac. Help and thank you in advance.
 

Online statistics

Members online
1,861
Guests online
1,575
Total visitors
3,436

Forum statistics

Threads
1,174,231
Posts
20,878,511
Members
1,570,902
Attachments
1,629,820
Profile posts
99,454
Top