Mga paps, sino po nkakaexperince dito ng pag ddc ng softether? After ko po magconnect, may notif po na ganito ang sinasabi
** Connected with NAT traversal - might be unstable **
This VPN Client is connected to the VPN Server 'LCSoftEther1' by using the NAT Traversal (UDP Hole Punching) technology.
NAT Traversal allows the
VPN Server behind the NAT-box to accept
VPN connections from VPN Client without
any port-forwarding setting on the NAT-box.
However, NAT Traversal-based VPN sessions
sometimes become unstable, because NAT
Traversal uses UDP-based protocol. For example,
the VPN tunnel disconnects every 5 minutes
if there is a poor NAT-box between the VPN
Server and the VPN Client. Some large-scale NAT
gateways in cheap ISPs sometimes cause the same
problem on NAT Traversal. This is a problem of routers or ISPs.
This is not a problem of SoftEther VPN software.
To solve the unstable tunnel problem, you should c
onnect to the VPN Server's TCP listener port directly,
instead of using NAT Traversal. To connect to the
VPN Server directly by using TCP, a listener port of the
VPN Server must be exposed to the Internet by
a port-forward setting on the NAT-box. Ask the administrator
of the NAT-box, or refer to the manual of the NAT-box to add a port-forwarding setting on the NAT-box.
If this message still remains despite the VPN Server
is exposing a TCP port to the Internet, check the
"Disable NAT-T" checkbox on the VPN Client connection setting screen.
LCSoftEther Servers
Owned And Managed By:
LadyClare
_Dreyannz_
Server Rules:
-No Torrent Downloading
-No îllégâl Activities
-No Sharing Of Accounts
Server Setup Used:
SEAutoScript by _Dreyannz_
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
pano po ba mapa stable si softether?
Salamat po
** Connected with NAT traversal - might be unstable **
This VPN Client is connected to the VPN Server 'LCSoftEther1' by using the NAT Traversal (UDP Hole Punching) technology.
NAT Traversal allows the
VPN Server behind the NAT-box to accept
VPN connections from VPN Client without
any port-forwarding setting on the NAT-box.
However, NAT Traversal-based VPN sessions
sometimes become unstable, because NAT
Traversal uses UDP-based protocol. For example,
the VPN tunnel disconnects every 5 minutes
if there is a poor NAT-box between the VPN
Server and the VPN Client. Some large-scale NAT
gateways in cheap ISPs sometimes cause the same
problem on NAT Traversal. This is a problem of routers or ISPs.
This is not a problem of SoftEther VPN software.
To solve the unstable tunnel problem, you should c
onnect to the VPN Server's TCP listener port directly,
instead of using NAT Traversal. To connect to the
VPN Server directly by using TCP, a listener port of the
VPN Server must be exposed to the Internet by
a port-forward setting on the NAT-box. Ask the administrator
of the NAT-box, or refer to the manual of the NAT-box to add a port-forwarding setting on the NAT-box.
If this message still remains despite the VPN Server
is exposing a TCP port to the Internet, check the
"Disable NAT-T" checkbox on the VPN Client connection setting screen.
LCSoftEther Servers
Owned And Managed By:
LadyClare
_Dreyannz_
Server Rules:
-No Torrent Downloading
-No îllégâl Activities
-No Sharing Of Accounts
Server Setup Used:
SEAutoScript by _Dreyannz_
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
pano po ba mapa stable si softether?
Salamat po