What's new

Closed Sino po makakatulong sakin dito sa usb ko?

Status
Not open for further replies.
Click start
Then run regedit
Go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
if you can't find StorageDevicePolicies under control folder
then make some new one. Follow this steps:

Step 1:
Go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
again and right click control folder

Step 2:
Select new, then click key and rename the new key #1 folder into
StorageDevicePolicies

Step 3:
Right click StorageDevicePolicies folder and select new DWORD(32-bit) Value
for 32-bit Operating System and select new DWORD(64-bit) Value
for 64-bit Operating System

Step 4:
Rename dword newer folder into WriteProtect, then double click WriteProtect
and change the value data into 0 with hexadecimal base, Then close regedit

Step 5:
Open my computer and refresh it 5 times without do anything to your usb, and
properly eject your flash drive

Step 6:
Plug in your usb again into your computer and format it using exfat instead of fat32


After that, you're done!
You can view your USB again. (y)
Ginawa ko na to ayaw parin talaga :( sad
 
Click start
Then run regedit
Go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
if you can't find StorageDevicePolicies under control folder
then make some new one. Follow this steps:

Step 1:
Go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
again and right click control folder

Step 2:
Select new, then click key and rename the new key #1 folder into
StorageDevicePolicies

Step 3:
Right click StorageDevicePolicies folder and select new DWORD(32-bit) Value
for 32-bit Operating System and select new DWORD(64-bit) Value
for 64-bit Operating System

Step 4:
Rename dword newer folder into WriteProtect, then double click WriteProtect
and change the value data into 0 with hexadecimal base, Then close regedit

Step 5:
Open my computer and refresh it 5 times without do anything to your usb, and
properly eject your flash drive

Step 6:
Plug in your usb again into your computer and format it using exfat instead of fat32


After that, you're done!
You can view your USB again. (y)
Ginawa ko na to ayaw parin talaga :( sad

try mo yung diskpart method na nasa tut ng binigay ko na link.
 
Pagkatapos mong iverify if may check si "Write" under properties ni USB, open ka ng elevated command prompt ( Run as Admin )

Then follow this command
DISKPART
LIST VOLUME
Then select mo yung volume name ng USB mo
Then type this ATTRIBUTES DISK CLEAR READONLY

Let me know kung ano mangyayari
 
If na Clear mo na yung rad only sir and hindi mo maformat,Sad to say pero corrupted na si USB drive mo,last option mo is to download a tool to check if kaya nya iforce na maformat. PWede mo itry is Kingston Formatter

Eto ling You do not have permission to view the full content of this post. Log in or register now.

Pag ala talaga pre need mo na bumili ng bagong USB flash drive and do not buy any flash drive from cdrking cause its disposable.
 
Status
Not open for further replies.
Back
Top