Help Samsung galaxy j4+ openline

[Kingeric]

paanu po mag openline ng samsung galaxyj4+ nkaopen lang po sya sa globe baka po merun expert jan bka pwede mag pa tulong

 

[MarkRob06]

I'm not an expert in this field
but I know you need to flash an open-line Samsung OS to that phone
here:
You do not have permission to view the full content of this post. Log in or register now.
(double check if tama ba yang model code)

 

[Kingeric]

I'm not an expert in this field
but I know you need to flash an open-line Samsung OS to that phone
here:
You do not have permission to view the full content of this post. Log in or register now.
(double check if tama ba yang model code)

salamat po ng marami ....paps

 

[Kingeric]

I'm not an expert in this field
but I know you need to flash an open-line Samsung OS to that phone
here:
You do not have permission to view the full content of this post. Log in or register now.
(double check if tama ba yang model code)

idodownload lang po b yan paps. after po maidownload yan ok npo ba sya or may procedure pah

 

[MarkRob06]

idodownload lang po b yan paps. after po maidownload yan ok npo ba sya or may procedure pah

Here are the steps to flash official Samsung firmware using Odin:

1. Download and install Odin and Samsung USB drivers on your PC.
2. Download the official Samsung firmware for your device from a reliable source.
3. Extract the firmware file if it is in a ZIP or RAR archive.
4. Turn off your Samsung device and put it into Download mode by pressing and holding the Volume Down, Power, and Home buttons.
5. Connect the device to your PC via a USB cable.
6. Open Odin on your PC and wait for it to recognize the connected device.
7. Load the extracted firmware file into Odin by clicking on the "AP" or "PDA" button and selecting the extracted firmware file.
8. Make sure only the "Auto Reboot" and "F. Reset Time" options are checked in Odin and no other options are selected.
9. Click the "Start" button to begin the flashing process.
10. Wait for Odin to complete the flashing process, which may take several minutes.
11. Once the flashing process is complete, your device will automatically reboot.

 

[Kingeric]

Here are the steps to flash official Samsung firmware using Odin:

1. Download and install Odin and Samsung USB drivers on your PC.
2. Download the official Samsung firmware for your device from a reliable source.
3. Extract the firmware file if it is in a ZIP or RAR archive.
4. Turn off your Samsung device and put it into Download mode by pressing and holding the Volume Down, Power, and Home buttons.
5. Connect the device to your PC via a USB cable.
6. Open Odin on your PC and wait for it to recognize the connected device.
7. Load the extracted firmware file into Odin by clicking on the "AP" or "PDA" button and selecting the extracted firmware file.
8. Make sure only the "Auto Reboot" and "F. Reset Time" options are checked in Odin and no other options are selected.
9. Click the "Start" button to begin the flashing process.
10. Wait for Odin to complete the flashing process, which may take several minutes.
11. Once the flashing process is complete, your device will automatically reboot.

ai ganun pla heheh... problen nyan wala kmi pc pero kahit ganun pa maam maraming maraming salamat poh...

 

[MarkRob06]

ai ganun pla heheh... problen nyan wala kmi pc pero kahit ganun pa maam maraming maraming salamat poh...

try not to brick your device bro
follow mo lang steps nayan or nood sa yotube kung papano

 

[Kingeric]

try not to brick your device bro
follow mo lang steps nayan or nood sa yotube kung papano

ou nga paps.. pero hindi p yun yung problema merun png mas malala yung data nya kahit nka on hundi lumalabas yung logo dati h+ ngayun E nlng minsan ayaw p lumabas tsk wifi lng sya mgagamit sa net bka may idea ka paps

 

[MarkRob06]

ou nga paps.. pero hindi p yun yung problema merun png mas malala yung data nya kahit nka on hundi lumalabas yung logo dati h+ ngayun E nlng minsan ayaw p lumabas tsk wifi lng sya mgagamit sa net bka may idea ka paps

if the problem is dahil nga hindi sya naka open line
I open line mo gamit yang tut
but if signal problem sya I think you cannot do anything about it kasi limited na sya sa hardware mo or your location does not support 3g signal widely

 

[Kingeric]

if the problem is dahil nga hindi sya naka open line
I open line mo gamit yang tut
but if signal problem sya I think you cannot do anything about it kasi limited na sya sa hardware mo or your location does not support 3g signal widely

bka nga signal problema kse nung napagawa nmin sya pinalitan ng lcd at tinangal yung password pag uwe nmin sa house ngamut p ng misis ko pang fb YøùTùbé tas ilng days lng mga 1 week bigla nlng ayaw lumabas ng h+ hangang E nalang bka nga may problema yung sa signal ng phone kase minsan nawawalan ng signal

hahah. .. maganda ata nito ibenta nalang sabi ko nga sana kahit hindi n sya ma openline maayus lng yung data nya ok n pra sana sa bhay may libangan yung kids koh...

 

[MarkRob06]

bka nga signal problema kse nung napagawa nmin sya pinalitan ng lcd at tinangal yung password pag uwe nmin sa house ngamut p ng misis ko pang fb YøùTùbé tas ilng days lng mga 1 week bigla nlng ayaw lumabas ng h+ hangang E nalang bka nga may problema yung sa signal ng phone kase minsan nawawalan ng signal

hahah. .. maganda ata nito ibenta nalang sabi ko nga sana kahit hindi n sya ma openline maayus lng yung data nya ok n pra sana sa bhay may libangan yung kids koh...

if you can't risk bricking the device
my advice is not to nalang kasi kung ipapagawa pa yan gastos lang
it is what it is nalang muna kasi hindi naman natin kontrolado signal sa area eh
I hope for your decision of what to do to the device will bring satisfaction bro

 

[PHC-VICTOR]

Di maari