Closed Request: bigyan ko payload tnt smart sino makatulongsa epson l210 ko

[ALLERGY PHCONSULTANT]

Help please ,,


3lights beeping! Pag on ko walang beep pag mag start na print nag beep tatlo di ko naman ma reset error daw paper jam

Eh wala naman

Nibaklas ko na wala naman dumi,

Sometimes pag on ko mag beep sya na stock dun sa lalagyan nya di umaalis

May ink ako marami

May reseter naman ako di parin

Sa ink pad bato ? O sa ano pa




Kita 3 lights 2red and the power button

Ang makatulong bigyan ko payloaad or load50 hehe

Basta gumana secretaccount tulong naman oh hehe

 

[Jose1816]

USB cables or connections can sometimes be the source of USB problems. Try one or both of these solutions:

For best results, you should connect the printer directly to the computer's USB port. If you must use multiple USB hubs, we recommend that you connect the printer to the first-tier hub.
Cutter position error The automatic roll paper cutter did not return to the appropriate position.

Solution- Turn off the printer, then turn the printer back on. If the error does not clear, contact your dealer.

Carriage error-The print head carriage is obstructed by jammed paper or other foreign material and cannot return to the home position

Solution- Turn off the printer. Open the printer cover and remove any paper or other obstructions from the paper path by hand. Then, turn the printer back on. If the error does not clear, contact your dealer.

 

[PesteM DiabolicaE]

anung model niyan?

 

[Estong1976]

Update mo driver

 

[WALANGMAGAWA]

tingnan mo muna mga sensor niyan baka marumi lang or may nakaharang

 

[Shinsuke Nishizono]

Hold power button for 20-30 secs.

 

[goyynb]

Hold mo lang paps ang power at ang nasa huli na button hanggang parang may piniprint ka maririnig kapag tapos nah ma o-off yan at ready to print na uli yan lang ginawa ko sa printer nang lolo ko!! Hope its help!

 

[jorross]

1. i-off mu printer
2. buksan ang cover ung sa scanner
3. itulak ang cartridge sa pinakasagad sa right side
4. i-on ang printer

pag same problem
tgnan ang error code

o ireset ang printer.

 

[zergziljian]

takbo nah . . .

kung ayaw parin ma resolba, for sure bibili ka ng bagong printer. . .

peace.

 

[meta21]

try mo tanggalin lahat ng cable sa printer. tapos uninstall mo rin yung software and driver ng printer sa pc. tapos restart then reinstall mo sofware sa pc tapos isaksak mo ulit mga cable. pag nageeror parin. reset mo naman

 

[injector69]

Sa flex ng ink yan paps 1set yan... Hanap ka sa mga junkshop bilhin mo kahit 20 lng tapos palitan mo lnhg mdali lng nman palitan kasi d nman xa wirings eh, sa flex yan ng lalahyan ng ink, last time my pinaayos sa akin na ganyan epson dn ang ginawaka pinalitan q tlga xa ung llgyan ng ink mhaba yan yung kulay white na ribbon wire kng tawagin,nkahanap lng aq ng pull out binaklas q lng tpos pinalit na lng... Cateful lng sa pg tanngal ng cover my mga secret lock dn yan...

 

[AnDylan]

naayos na ba, sir? if hindi pa, try this. kung walang papel sa loob possible pickup paper roller na problem nyan. naputol ang spring kaya paperjam. kaya cant feed. pag tinanggal mo waste pad, makikita mo yan. no need reset yan, pag papalitpalit ng blink ang ink at paper yun ang need mo e reset.